/*==================================================================================================
* Project : RTD AUTOSAR 4.4
* Platform : CORTEXM
* Peripheral : LPSPI
* Dependencies :
*
* Autosar Version : 4.4.0
* Autosar Revision : ASR_REL_4_4_REV_0000
* Autosar Conf.Variant :
* SW Version : 1.0.0
* Build Version : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907
*
* (c) Copyright 2020-2021 NXP Semiconductors
* All Rights Reserved.
*
* NXP Confidential. This software is owned or controlled by NXP and may only be
* used strictly in accordance with the applicable license terms. By expressly
* accepting such terms or by downloading, installing, activating and/or otherwise
* using the software, you are agreeing that you have read, and that you agree to
* comply with and are bound by, such license terms. If you do not agree to be
* bound by the applicable license terms, then you may not retain, install,
* activate or otherwise use the software.
==================================================================================================*/
#ifndef LPSPI_IP_CFG_H
#define LPSPI_IP_CFG_H
/**
* @file Lpspi_Ip_Cfg.h
* @version 1.0.0
*
* @brief AUTOSAR Spi - Spi configuration header file.
* @details This file is the header containing all the necessary information for SPI
* module configuration(s).
* @addtogroup LPSPI_DRIVER_CONFIGURATION Lpspi Driver Configuration
* @{
*/
#ifdef __cplusplus
extern "C"{
#endif
/*==================================================================================================
* INCLUDE FILES
* 1) system and project includes
* 2) needed interfaces from external units
* 3) internal and external interfaces from this unit
* 4) user callback header files
==================================================================================================*/
#include "Mcal.h"
#include "OsIf.h"
#include "Lpspi_Ip_VS_0_PBcfg.h"
#include "S32K146_LPSPI.h"
/*==================================================================================================
* SOURCE FILE VERSION INFORMATION
==================================================================================================*/
#define LPSPI_IP_VENDOR_ID_CFG 43
#define LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG 4
#define LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG 4
#define LPSPI_IP_AR_RELEASE_REVISION_VERSION_CFG 0
#define LPSPI_IP_SW_MAJOR_VERSION_CFG 1
#define LPSPI_IP_SW_MINOR_VERSION_CFG 0
#define LPSPI_IP_SW_PATCH_VERSION_CFG 0
/*==================================================================================================
* FILE VERSION CHECKS
==================================================================================================*/
#ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK
/* Check if current file and Mcal header file are of the same Autosar version */
#if ((LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG != MCAL_AR_RELEASE_MAJOR_VERSION) || \
(LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG != MCAL_AR_RELEASE_MINOR_VERSION))
#error "AutoSar Version Numbers of Lpspi_Ip_Cfg.h and Mcal.h are different"
#endif
/* Check if current file and OsIf header file are of the same Autosar version */
#if ((LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG != OSIF_AR_RELEASE_MAJOR_VERSION) || \
(LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG != OSIF_AR_RELEASE_MINOR_VERSION))
#error "AutoSar Version Numbers of Lpspi_Ip_Cfg.h and OsIf.h are different"
#endif
#endif
/* Check if Lpspi_Ip_VS_0_PBcfg header file and Spi configuration header file are of the same vendor */
#if (LPSPI_IP_VS_0_VENDOR_ID_PBCFG != LPSPI_IP_VENDOR_ID_CFG)
#error "Lpspi_Ip_VS_0_PBcfg.h and Lpspi_Ip_Cfg.h have different vendor IDs"
#endif
/* Check if Lpspi_Ip_VS_0_PBcfg header file and Spi configuration header file are of the same Autosar version */
#if ((LPSPI_IP_VS_0_AR_RELEASE_MAJOR_VERSION_PBCFG != LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG) || \
(LPSPI_IP_VS_0_AR_RELEASE_MINOR_VERSION_PBCFG != LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG) || \
(LPSPI_IP_VS_0_AR_RELEASE_REVISION_VERSION_PBCFG != LPSPI_IP_AR_RELEASE_REVISION_VERSION_CFG))
#error "AutoSar Version Numbers of Lpspi_Ip_VS_0_PBcfg.h and Lpspi_Ip_Cfg.h are different"
#endif
/* Check if Lpspi_Ip_VS_0_PBcfg header file and Spi configuration header file are of the same software version */
#if ((LPSPI_IP_VS_0_SW_MAJOR_VERSION_PBCFG != LPSPI_IP_SW_MAJOR_VERSION_CFG) || \
(LPSPI_IP_VS_0_SW_MINOR_VERSION_PBCFG != LPSPI_IP_SW_MINOR_VERSION_CFG) || \
(LPSPI_IP_VS_0_SW_PATCH_VERSION_PBCFG != LPSPI_IP_SW_PATCH_VERSION_CFG))
#error "Software Version Numbers of Lpspi_Ip_VS_0_PBcfg.h and Lpspi_Ip_Cfg.h are different"
#endif
/*==================================================================================================
* CONSTANTS
==================================================================================================*/
#define LPSPI_IP_CONFIG_EXT \
LPSPI_IP_CONFIG_VS_0_PB \
/** @brief Total number of SpiPhyUnit configured. */
#define LPSPI_IP_NUMBER_OF_INSTANCES (1U)
/** @brief Number of FIFO entries supported */
#define LPSPI_IP_FIFO_SIZE_U8 ((uint8)4U)
/** @brief HWUnits enabled/disabled */
#define LPSPI_IP_2_ENABLED (STD_ON)
#define LPSPI_IP_SLAVE_SUPPORT ((STD_OFF))
/**
* @brief Defines if transfers are made using DMA or FIFO.
* @details Defines if transfers are made using DMA or FIFO.
*/
#define LPSPI_IP_DMA_USED (STD_OFF)
/**
* @brief If enabled, allows dual MCU clock configuration settings.
* @details If enabled, allows dual MCU clock configuration settings.
*/
#define LPSPI_IP_DUAL_CLOCK_MODE (STD_OFF)
/**
* @brief Enable Dma Fast transfer support.
* @details When SpiAutosarExt/SpiEnableDmaFastTransferSupport = TRUE,
* the SPI driver can be supported to transfer multiple Jobs, Channels and CPU used only for processing end of Sequence transfer.
*/
#define LPSPI_IP_ENABLE_DMAFASTTRANSFER_SUPPORT (STD_OFF)
/**
* @brief Enable User Mode Support.
* @details When SpiAutosarExt/SpiEnableUserModeSupport = TRUE,
* the SPI driver can be executed from both supervisor and user mode.
*
* @api
*/
#define LPSPI_IP_ENABLE_USER_MODE_SUPPORT (STD_OFF)
#ifndef MCAL_ENABLE_USER_MODE_SUPPORT
#ifdef LPSPI_IP_ENABLE_USER_MODE_SUPPORT
#if (STD_ON == LPSPI_IP_ENABLE_USER_MODE_SUPPORT)
#error MCAL_ENABLE_USER_MODE_SUPPORT is not enabled. For running Spi in user mode the MCAL_ENABLE_USER_MODE_SUPPORT needs to be defined
#endif /* (STD_ON == LPSPI_IP_ENABLE_USER_MODE_SUPPORT) */
#endif /* ifdef MCAL_ENABLE_USER_MODE_SUPPORT */
#endif /* ifndef MCAL_ENABLE_USER_MODE_SUPPORT*/
/**
* @brief SPI registers is controlled by REG_PROT IP.
*/
#define LPSPI_IP_REG_PROT_AVAILABLE (STD_OFF)
#if (STD_ON == LPSPI_IP_REG_PROT_AVAILABLE)
/**
* @brief The protection size
*/
#define LPSPI_IP_PROT_MEM_U32 ((uint32)4U)
#endif
/**
* @brief Maximum of frame size supported.
*/
#define LPSPI_IP_FRAMESIZE_MAX_U8 ((uint8)32U)
/**
* @brief Minimum of frame size supported.
*/
#define LPSPI_IP_FRAMESIZE_MIN_U8 ((uint8)4U)
/**
* @brief Define Timeout Method.
* @details Define a certain timeout method from OsIf will be used in the driver.
*/
#define LPSPI_IP_TIMEOUT_METHOD (OSIF_COUNTER_SYSTEM)
/**
* @brief Switches ON or OFF for the detection and reporting of development errors(API parameter checking) at IP level.
*/
/** @implements LPSPI_IP_DEV_ERROR_DETECT_define */
#define LPSPI_IP_DEV_ERROR_DETECT (STD_OFF)
/**
* @brief Half duplex supported.
*/
/** @implements LPSPI_IP_HALF_DUPLEX_MODE_SUPPORT_define */
#define LPSPI_IP_HALF_DUPLEX_MODE_SUPPORT (STD_OFF)
/**
* @brief Defines the "Number of Loops" timeout.
* @details Defines the "Number of Loops" timeout used Spi_AsyncTransmitHalfDuplex in half duplex mode
* during the wait on TX transmission to complete before start next channel that in receive mode or latest channel in job.
* One timeout unit means that no TX or RX was executed(the IF statements are returning FALSE).
*/
#define LPSPI_IP_HALF_DUPLEX_TIMEOUT_COUNTER ((uint32)(50000))
/*==================================================================================================
* DEFINES AND MACROS
==================================================================================================*/
/*==================================================================================================
* ENUMS
==================================================================================================*/
/*==================================================================================================
* STRUCTURES AND OTHER TYPEDEFS
==================================================================================================*/
/*==================================================================================================
* GLOBAL VARIABLE DECLARATIONS
==================================================================================================*/
/*==================================================================================================
* FUNCTION PROTOTYPES
==================================================================================================*/
#ifdef __cplusplus
}
#endif
#endif
/** @} */