/*================================================================================================== * Project : RTD AUTOSAR 4.4 * Platform : CORTEXM * Peripheral : Ftm Lpit Lptmr Port_Ci LpCmp * Dependencies : none * * Autosar Version : 4.4.0 * Autosar Revision : ASR_REL_4_4_REV_0000 * Autosar Conf.Variant : * SW Version : 1.0.0 * Build Version : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907 * * (c) Copyright 2020-2021 NXP Semiconductors * All Rights Reserved. * * NXP Confidential. This software is owned or controlled by NXP and may only be * used strictly in accordance with the applicable license terms. By expressly * accepting such terms or by downloading, installing, activating and/or otherwise * using the software, you are agreeing that you have read, and that you agree to * comply with and are bound by, such license terms. If you do not agree to be * bound by the applicable license terms, then you may not retain, install, * activate or otherwise use the software. ==================================================================================================*/ #ifndef ICU_CFG_H #define ICU_CFG_H /** * @file Icu_Cfg.h * @version 1.0.0 * * @brief AUTOSAR Icu - contains the configuration data of the ICU driver * @details Contains the configuration data of the ICU driver * * @addtogroup icu Icu Driver * @{ */ #ifdef __cplusplus extern "C"{ #endif /*================================================================================================== INCLUDE FILES 1) system and project includes 2) needed interfaces from external units 3) internal and external interfaces from this unit ==================================================================================================*/ #include "Icu_EnvCfg.h" #include "StandardTypes.h" #include "Icu_VS_0_PBcfg.h" /*================================================================================================== SOURCE FILE VERSION INFORMATION ==================================================================================================*/ #define ICU_CFG_VENDOR_ID 43 #define ICU_CFG_AR_RELEASE_MAJOR_VERSION 4 #define ICU_CFG_AR_RELEASE_MINOR_VERSION 4 #define ICU_CFG_AR_RELEASE_REVISION_VERSION 0 #define ICU_CFG_SW_MAJOR_VERSION 1 #define ICU_CFG_SW_MINOR_VERSION 0 #define ICU_CFG_SW_PATCH_VERSION 0 /*================================================================================================== FILE VERSION CHECKS ==================================================================================================*/ /* Check if source file and Icu_EnvCfg header file are of the same vendor */ #if (ICU_CFG_VENDOR_ID != ICU_ENVCFG_VENDOR_ID) #error "Icu_Cfg.h and Icu_EnvCfg.h have different vendor IDs" #endif /* Check if source file and Icu_EnvCfg header file are of the same AutoSar version */ #if ((ICU_CFG_AR_RELEASE_MAJOR_VERSION != ICU_ENVCFG_AR_RELEASE_MAJOR_VERSION) || \ (ICU_CFG_AR_RELEASE_MINOR_VERSION != ICU_ENVCFG_AR_RELEASE_MINOR_VERSION) || \ (ICU_CFG_AR_RELEASE_REVISION_VERSION != ICU_ENVCFG_AR_RELEASE_REVISION_VERSION)) #error "AutoSar Version Numbers of Icu_Cfg.h and Icu_EnvCfg.h are different" #endif /* Check if source file and Icu_EnvCfg header file are of the same Software version */ #if ((ICU_CFG_SW_MAJOR_VERSION != ICU_ENVCFG_SW_MAJOR_VERSION) || \ (ICU_CFG_SW_MINOR_VERSION != ICU_ENVCFG_SW_MINOR_VERSION) || \ (ICU_CFG_SW_PATCH_VERSION != ICU_ENVCFG_SW_PATCH_VERSION)) #error "Software Version Numbers of Icu_Cfg.h and Icu_EnvCfg.h are different" #endif #ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK #if ((ICU_CFG_AR_RELEASE_MAJOR_VERSION != STD_AR_RELEASE_MAJOR_VERSION) || \ (ICU_CFG_AR_RELEASE_MINOR_VERSION != STD_AR_RELEASE_MINOR_VERSION)) #error "AutoSar Version Numbers of Icu_Cfg.h and StandardTypes.h are different" #endif #endif /* Check if source file and ICU configuration header file are of the same vendor */ #if (ICU_VS_0_PBCFG_VENDOR_ID != ICU_CFG_VENDOR_ID) #error "Icu_VS_0_PBcfg.h and Icu_Cfg.h have different vendor IDs" #endif /* Check if header file and Icu configuration header file are of the same Autosar version */ #if ((ICU_VS_0_PBCFG_AR_RELEASE_MAJOR_VERSION != ICU_CFG_AR_RELEASE_MAJOR_VERSION) || \ (ICU_VS_0_PBCFG_AR_RELEASE_MINOR_VERSION != ICU_CFG_AR_RELEASE_MINOR_VERSION) || \ (ICU_VS_0_PBCFG_AR_RELEASE_REVISION_VERSION != ICU_CFG_AR_RELEASE_REVISION_VERSION)) #error "AutoSar Version Numbers of Icu_VS_0_PBcfg.h and Icu_Cfg.h are different" #endif /* Check if header file and Icu configuration header file are of the same software version */ #if ((ICU_VS_0_PBCFG_SW_MAJOR_VERSION != ICU_CFG_SW_MAJOR_VERSION) || \ (ICU_VS_0_PBCFG_SW_MINOR_VERSION != ICU_CFG_SW_MINOR_VERSION) || \ (ICU_VS_0_PBCFG_SW_PATCH_VERSION != ICU_CFG_SW_PATCH_VERSION)) #error "Software Version Numbers of Icu_VS_0_PBcfg.h and Icu_Cfg.h are different" #endif /*================================================================================================== CONSTANTS ==================================================================================================*/ /*================================================================================================== DEFINES AND MACROS ==================================================================================================*/ #define ICU_CONFIG_EXT \ ICU_CONFIG_VS_0_PB \ /** @brief Maximum number of ICU channels configured. */ #define ICU_MAX_CHANNEL ((Icu_ChannelType)1U) /** * @brief Switches the Development Error Detection and Notification on or off. * STD_ON: Enabled. * STD_OFF: Disabled. * @implements ICU_DEV_ERROR_DETECT_define */ #define ICU_DEV_ERROR_DETECT (STD_ON) /** * @brief Switch for enabling Wakeup source reporting. * STD_ON: Report Wakeup source. * STD_OFF: Do not report Wakeup source. * */ #define ICU_REPORT_WAKEUP_SOURCE (STD_ON) /** * @brief Support for User mode. * If this parameter has been configured to 'STD_ON', the ICU driver code can be executed from both supervisor and user mode. */ #define ICU_ENABLE_USER_MODE_SUPPORT (STD_OFF) #ifndef MCAL_ENABLE_USER_MODE_SUPPORT #ifdef ICU_ENABLE_USER_MODE_SUPPORT #if (STD_ON == ICU_ENABLE_USER_MODE_SUPPORT) #error MCAL_ENABLE_USER_MODE_SUPPORT is not enabled. For running Icu in user mode the MCAL_ENABLE_USER_MODE_SUPPORT needs to be defined #endif /* (STD_ON == ICU_ENABLE_USER_MODE_SUPPORT) */ #endif /* ifdef ICU_ENABLE_USER_MODE_SUPPORT*/ #endif /* ifndef MCAL_ENABLE_USER_MODE_SUPPORT */ /** @brief Configuration of Optional API's. */ /** * @brief Adds or removes the service Icu_GetVersionInfo() from the code. * STD_ON: Icu_GetVersionInfo() can be used. * STD_OFF: Icu_GetVersionInfo() can not be used. * */ #define ICU_GET_VERSION_INFO_API (STD_ON) /** * @brief Adds or removes the service Icu_DeInit() from the code. * STD_ON: Icu_DeInit() can be used. STD_OFF: Icu_DeInit() can not be used. * @implements ICU_DE_INIT_API_define */ #define ICU_DE_INIT_API (STD_ON) /** * @brief Adds or removes the service Icu_SetMode() from the code. * STD_ON: Icu_SetMode() can be used. * STD_OFF: Icu_SetMode() can not be used. * @implements ICU_SET_MODE_API_define */ #define ICU_SET_MODE_API (STD_ON) /** * @brief Adds or removes the service Icu_DisableWakeup() from the code. * STD_ON: Icu_DisableWakeup() can be used. * STD_OFF: Icu_DisableWakeup() can not be used. * @implements ICU_DISABLE_WAKEUP_API_define */ #define ICU_DISABLE_WAKEUP_API (STD_ON) /** * @brief Adds or removes the service Icu_EnableWakeup() from the code. * STD_ON: Icu_EnableWakeup() can be used. * STD_OFF: Icu_EnableWakeup() can not be used. * @implements ICU_ENABLE_WAKEUP_API_define */ #define ICU_ENABLE_WAKEUP_API (STD_ON) /** * @brief Adds or removes all services related to the timestamping functionality as listed * below from the code: Icu_StartTimestamp(), Icu_StopTimestamp(), Icu_GetTimestampIndex(). * STD_ON: The services listed above can be used. * STD_OFF: The services listed above can not be used. * @implements ICU_TIMESTAMP_API_define */ #define ICU_TIMESTAMP_API (STD_ON) /** * @brief Adds or removes all services related to the edge counting functionality as listed below, * from the code: Icu_ResetEdgeCount(), Icu_EnableEdgeCount(), Icu_DisableEdgeCount(), * Icu_GetEdgeNumbers(). * STD_ON: The services listed above can be used. * STD_OFF: The services listed above can not be used. * @implements ICU_EDGE_COUNT_API_define */ #define ICU_EDGE_COUNT_API (STD_ON) /** * @brief Adds or removes the service Icu_GetTimeElapsed() from the code. * STD_ON: Icu_GetTimeElapsed() can be used. * STD_OFF: Icu_GetTimeElapsed() can not be used. * @implements ICU_GET_TIME_ELAPSED_API_define */ #define ICU_GET_TIME_ELAPSED_API (STD_ON) /** * @brief Adds or removes the service Icu_GetDutyCycleValues() from the code. * STD_ON: Icu_GetDutyCycleValues() can be used. * STD_OFF: Icu_GetDutyCycleValues() can not be used. * @implements ICU_GET_DUTY_CYCLE_VALUES_API_define */ #define ICU_GET_DUTY_CYCLE_VALUES_API (STD_ON) /** * @brief Adds or removes the service Icu_GetInputState() from the code. * STD_ON: Icu_GetInputState() can be used. * STD_OFF: Icu_GetInputState() can not be used. * @implements ICU_GET_INPUT_STATE_API_define */ #define ICU_GET_INPUT_STATE_API (STD_ON) /** * @brief Adds or removes the services Icu_StartSignalMeasurement() and * Icu_StopSignalMeasurement() from the code. * STD_ON: Icu_StartSignalMeasurement() and Icu_StopSignalMeasurement() can be used. * STD_OFF: Icu_StartSignalMeasurement() and Icu_StopSignalMeasurement() can not be used. * @implements ICU_SIGNAL_MEASUREMENT_API_define */ #define ICU_SIGNAL_MEASUREMENT_API (STD_ON) /** * @brief Adds or removes the service Icu_CheckWakeup() from the code. * STD_ON: Icu_CheckWakeup() can be used. * STD_OFF: Icu_CheckWakeup() can not be used. * @implements ICU_WAKEUP_FUNCTIONALITY_API_define */ #define ICU_WAKEUP_FUNCTIONALITY_API (STD_ON) /** * @brief Adds or removes the services Icu_EnableEdgeDetection() and Icu_DisableEdgeDetection() * from the code. * STD_ON: Icu_EnableEdgeDetection() and Icu_DisableEdgeDetection() can be used. * STD_OFF: Icu_EnableEdgeDetection() and Icu_DisableEdgeDetection() can not be used. * * @implements ICU_EDGE_DETECT_API_define */ #define ICU_EDGE_DETECT_API (STD_ON) /** * @brief Implementation specific parameter * Adds or Removes the code related to overflow notification * STD_ON: Overflow notification function will be called if overflow occurs * STD_OFF: Overflow notification function will not be called though overflow occurs * */ #define ICU_OVERFLOW_NOTIFICATION_API (STD_OFF) /** * @brief Adds or removes the service Icu_GetInputLevel() from the code. * STD_ON: Icu_GetInputLevel() can be used. * STD_OFF: Icu_GetInputLevel() can not be used. * * */ #define ICU_GET_INPUT_LEVEL_API (STD_ON) /** * @brief Adds / removes the service Icu_GetPulseWidth() from the code. * STD_ON: Icu_GetPulseWidth() can be used. * STD_OFF: Icu_GetPulseWidth() can not be used. */ #define ICU_GET_PULSE_WIDTH_API (STD_OFF) /** * @brief Adds or removes the support measurement with DMA * STD_ON: DMA measurement can be used. * STD_OFF: DMA measurement can not be used. */ /** * @brief Adds or removes the for support Signal Measurement with DMA. * STD_ON: DMA in SM measurement can be used. * STD_OFF: DMA in SM measurement can not be used. */ #define ICU_SIGNALMEASUREMENT_USES_DMA (STD_OFF) /** * @brief Adds or removes the support for TimeStamp Measurement with DMA. * STD_ON: DMA in TS measurement can be used. * STD_OFF: DMA in TS measurement can not be used. */ #define ICU_TIMESTAMP_USES_DMA (STD_OFF) #if ((ICU_SIGNALMEASUREMENT_USES_DMA == STD_ON) || (ICU_TIMESTAMP_USES_DMA == STD_ON)) /** * @brief Implementation specific. * Each channel provides a subset of the functionality available in the unified channel, * at a resolution of 32 bits. */ #define ICU_CAPTURE_REGISTER_MASK (((Icu_ValueType)0xFFFFU)) /** * @brief Implementation specific. * Each channel provides a DMA resolution of 16 bits. */ #define ICU_DMA_SIZE (DMA_IP_TRANSFER_SIZE_2_BYTE) /** * @brief Implementation specific. * DMA number of bytes transfer on a minor loop is 2 bytes - for 16 bits hw registers. */ #define ICU_DMA_NUM_BYTES (2U) /** * @brief Implementation specific. * DMA offset is 16 bits HW registers. */ #define ICU_DMA_OFFSET (2U) /** @brief Define when no MCL DMA channel is used. */ #define NoMclDmaChannel ((Mcl_ChannelType)0xFF) #endif /* ((ICU_SIGNALMEASUREMENT_USES_DMA == STD_ON) || (ICU_TIMESTAMP_USES_DMA == STD_ON)) */ /** * @brief Adds / removes the service Icu_SetClockMode() from the code. * STD_ON: Icu_SetClockMode() can be used. * STD_OFF: Icu_SetClockMode() can not be used. * */ #define ICU_DUAL_CLOCK_MODE_API (STD_OFF) /** * @brief Adds / removes the service Icu_GetCaptureRegisterValue() from the code. * STD_ON: Icu_GetCaptureRegisterValue() can be used. * STD_OFF: Icu_GetCaptureRegisterValue() can not be used. */ #define ICU_CAPTURERGISTER_API (STD_OFF) #define IcuChannel_0 (IcuConf_IcuChannel_IcuChannel_0) #define IcuConf_IcuChannel_IcuChannel_0 ((Icu_ChannelType)0U) /** * @brief Number of configured partitions. */ #define ICU_MAX_PARTITIONS (1U) #define ICU_MULTICORE_SUPPORT (STD_OFF) /*================================================================================================== ENUMS ==================================================================================================*/ /*================================================================================================== STRUCTURES AND OTHER TYPEDEFS ==================================================================================================*/ /** * @brief Implementation specific. This type shall be chosen in order to have the most efficient * implementation on a specific microcontroller platform. * Range: 0 to width of the timer register. * Description: Width of the buffer for timestamp ticks and measured elapsed timeticks */ typedef uint16 Icu_TimerRegisterWidthType; /** * @brief Implementation specific. This type shall be chosen in order to have the most efficient * implementation on a specific microcontroller platform. * Description: Type, to abstract the return value of the service Icu_GetTimestampIndex(). */ typedef uint16 Icu_HwSpecificIndexType; /** * @brief Implementation specific. This type shall be chosen in order to have the most efficient * implementation on a specific microcontroller platform. * Description: Type, to abstract the return value of the service Icu_GetEdgeNumbers(). */ typedef uint16 Icu_HwSpecificEdgeNumberType; /*================================================================================================== FUNCTION PROTOTYPES ==================================================================================================*/ #ifdef __cplusplus } #endif #endif /* ICU_CFG_H */ /** @} */