/*==================================================================================================
* Project : RTD AUTOSAR 4.4
* Platform : CORTEXM
* Peripheral : Ftm Lpit Lptmr Port_Ci LpCmp
* Dependencies : none
*
* Autosar Version : 4.4.0
* Autosar Revision : ASR_REL_4_4_REV_0000
* Autosar Conf.Variant :
* SW Version : 1.0.0
* Build Version : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907
*
* (c) Copyright 2020-2021 NXP Semiconductors
* All Rights Reserved.
*
* NXP Confidential. This software is owned or controlled by NXP and may only be
* used strictly in accordance with the applicable license terms. By expressly
* accepting such terms or by downloading, installing, activating and/or otherwise
* using the software, you are agreeing that you have read, and that you agree to
* comply with and are bound by, such license terms. If you do not agree to be
* bound by the applicable license terms, then you may not retain, install,
* activate or otherwise use the software.
==================================================================================================*/
#ifndef PORT_CI_ICU_IP_DEFINES_H
#define PORT_CI_ICU_IP_DEFINES_H
/**
* @file Port2_Icu_Ip_Defines.h
* @version 1.0.0
*
* @brief AUTOSAR Icu - contains the data exported by the Icu module
* @details Contains the information that will be exported by the module, as requested by Autosar.
*
* @addtogroup port2_icu_ip PORT_CI IPL
* @{
*/
#ifdef __cplusplus
extern "C"{
#endif
/*==================================================================================================
* INCLUDE FILES
* 1) system and project includes
* 2) needed interfaces from external units
* 3) internal and external interfaces from this unit
*================================================================================================*/
#include "StandardTypes.h"
/* Include platform header file. */
#include "S32K146_PORT.h"
/*==================================================================================================
* SOURCE FILE VERSION INFORMATION
*================================================================================================*/
#define PORT_CI_ICU_IP_DEFINES_VENDOR_ID 43
#define PORT_CI_ICU_IP_DEFINES_AR_RELEASE_MAJOR_VERSION 4
#define PORT_CI_ICU_IP_DEFINES_AR_RELEASE_MINOR_VERSION 4
#define PORT_CI_ICU_IP_DEFINES_AR_RELEASE_REVISION_VERSION 0
#define PORT_CI_ICU_IP_DEFINES_SW_MAJOR_VERSION 1
#define PORT_CI_ICU_IP_DEFINES_SW_MINOR_VERSION 0
#define PORT_CI_ICU_IP_DEFINES_SW_PATCH_VERSION 0
/*==================================================================================================
* FILE VERSION CHECKS
==================================================================================================*/
#ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK
/* Check if header file and StandardTypes.h file are of the same Autosar version */
#if ((PORT_CI_ICU_IP_DEFINES_AR_RELEASE_MAJOR_VERSION != STD_AR_RELEASE_MAJOR_VERSION) || \
(PORT_CI_ICU_IP_DEFINES_AR_RELEASE_MINOR_VERSION != STD_AR_RELEASE_MINOR_VERSION))
#error "AutoSar Version Numbers of Port_Ci_Icu_Ip_Defines.h and StandardTypes.h are different"
#endif
#endif
/*==================================================================================================
* DEFINES AND MACROS
==================================================================================================*/
/* Macros that indicate PORT instances used by ICU. */
/** @brief PORT 0 ISR enable/disable */
#define PORT_CI_ICU_IP_PORT_0_ISR_USED (STD_ON)
/**
* @brief PORT CI channels defines
*/
/*
* PORT CI channel encoding
*
* [ 4 bit | 5 bit ]
* [ module id: 15 ... 0 | channel id: 31 ... 0 ]
*/
#define ICU_PORT_CI_MOD_MASK_U16 ((uint16)0x1E0)
#define ICU_PORT_CI_MOD_SHIFT ((uint16)5U)
#define ICU_PORT_CI_CH_MASK_U16 ((uint16)0x1F)
#define ICU_PORT_CI_CH_SHIFT ((uint16)0U)
/* PORT CI module and channel decoding */
#define ICU_PORT_CI_MODULE_INDEX_U8(ch) ((uint8)(((ch) & ICU_PORT_CI_MOD_MASK_U16) >> ICU_PORT_CI_MOD_SHIFT))
#define ICU_PORT_CI_CHANNEL_INDEX_U8(ch) ((uint8)(((ch) & ICU_PORT_CI_CH_MASK_U16) >> ICU_PORT_CI_CH_SHIFT))
/** @brief Get A number of PORT_CI hardware modules from resource file*/
#define ICU_NUM_PORT_CI_HW_MODULE_U8 ((uint8)5U)
/** @brief Switches the Development Error Detection and Notification on or off. */
#define PORT_CI_ICU_IP_DEV_ERROR_DETECT (STD_ON)
/** @brief Adds or removes all services related to mode set functionality. */
#define PORT_CI_ICU_IP_SET_MODE_API (STD_ON)
/** @brief Add or remove all functions related to input state. */
#define PORT_CI_ICU_IP_GET_INPUT_STATE_API (STD_ON)
/** @brief Adds or removes all services related to the edge detect functionality. */
#define PORT_CI_ICU_IP_EDGE_DETECT_API (STD_ON)
/** @brief Adds or removes all services related to the deinitialization functionality. */
#define PORT_CI_ICU_IP_DEINIT_API (STD_ON)
/** @brief Support for User mode. If this parameter has been configured to 'STD_ON', the FTM driver
* code can be executed from both supervisor and user mode. */
#define PORT_CI_ICU_IP_ENABLE_USER_MODE_SUPPORT (STD_OFF)
/* Verification for user mode support. */
#ifndef MCAL_ENABLE_USER_MODE_SUPPORT
#if (defined (PORT_CI_ICU_IP_ENABLE_USER_MODE_SUPPORT) && (STD_ON == PORT_CI_ICU_IP_ENABLE_USER_MODE_SUPPORT))
#error MCAL_ENABLE_USER_MODE_SUPPORT is not enabled. For running Icu in user mode the MCAL_ENABLE_USER_MODE_SUPPORT needs to be defined
#endif
#endif
#ifdef __cplusplus
}
#endif
/** @} */
#endif /* PORT_CI_ICU_IP_DEFINES_H */