/*================================================================================================== * Project : RTD AUTOSAR 4.4 * Platform : CORTEXM * Peripheral : LPSPI * Dependencies : * * Autosar Version : 4.4.0 * Autosar Revision : ASR_REL_4_4_REV_0000 * Autosar Conf.Variant : * SW Version : 1.0.0 * Build Version : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907 * * (c) Copyright 2020-2021 NXP Semiconductors * All Rights Reserved. * * NXP Confidential. This software is owned or controlled by NXP and may only be * used strictly in accordance with the applicable license terms. By expressly * accepting such terms or by downloading, installing, activating and/or otherwise * using the software, you are agreeing that you have read, and that you agree to * comply with and are bound by, such license terms. If you do not agree to be * bound by the applicable license terms, then you may not retain, install, * activate or otherwise use the software. ==================================================================================================*/ #ifndef LPSPI_IP_CFG_H #define LPSPI_IP_CFG_H /** * @file Lpspi_Ip_Cfg.h * @version 1.0.0 * * @brief AUTOSAR Spi - Spi configuration header file. * @details This file is the header containing all the necessary information for SPI * module configuration(s). * @addtogroup LPSPI_DRIVER_CONFIGURATION Lpspi Driver Configuration * @{ */ #ifdef __cplusplus extern "C"{ #endif /*================================================================================================== * INCLUDE FILES * 1) system and project includes * 2) needed interfaces from external units * 3) internal and external interfaces from this unit * 4) user callback header files ==================================================================================================*/ #include "Mcal.h" #include "OsIf.h" #include "Lpspi_Ip_VS_0_PBcfg.h" #include "S32K146_LPSPI.h" /*================================================================================================== * SOURCE FILE VERSION INFORMATION ==================================================================================================*/ #define LPSPI_IP_VENDOR_ID_CFG 43 #define LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG 4 #define LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG 4 #define LPSPI_IP_AR_RELEASE_REVISION_VERSION_CFG 0 #define LPSPI_IP_SW_MAJOR_VERSION_CFG 1 #define LPSPI_IP_SW_MINOR_VERSION_CFG 0 #define LPSPI_IP_SW_PATCH_VERSION_CFG 0 /*================================================================================================== * FILE VERSION CHECKS ==================================================================================================*/ #ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK /* Check if current file and Mcal header file are of the same Autosar version */ #if ((LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG != MCAL_AR_RELEASE_MAJOR_VERSION) || \ (LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG != MCAL_AR_RELEASE_MINOR_VERSION)) #error "AutoSar Version Numbers of Lpspi_Ip_Cfg.h and Mcal.h are different" #endif /* Check if current file and OsIf header file are of the same Autosar version */ #if ((LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG != OSIF_AR_RELEASE_MAJOR_VERSION) || \ (LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG != OSIF_AR_RELEASE_MINOR_VERSION)) #error "AutoSar Version Numbers of Lpspi_Ip_Cfg.h and OsIf.h are different" #endif #endif /* Check if Lpspi_Ip_VS_0_PBcfg header file and Spi configuration header file are of the same vendor */ #if (LPSPI_IP_VS_0_VENDOR_ID_PBCFG != LPSPI_IP_VENDOR_ID_CFG) #error "Lpspi_Ip_VS_0_PBcfg.h and Lpspi_Ip_Cfg.h have different vendor IDs" #endif /* Check if Lpspi_Ip_VS_0_PBcfg header file and Spi configuration header file are of the same Autosar version */ #if ((LPSPI_IP_VS_0_AR_RELEASE_MAJOR_VERSION_PBCFG != LPSPI_IP_AR_RELEASE_MAJOR_VERSION_CFG) || \ (LPSPI_IP_VS_0_AR_RELEASE_MINOR_VERSION_PBCFG != LPSPI_IP_AR_RELEASE_MINOR_VERSION_CFG) || \ (LPSPI_IP_VS_0_AR_RELEASE_REVISION_VERSION_PBCFG != LPSPI_IP_AR_RELEASE_REVISION_VERSION_CFG)) #error "AutoSar Version Numbers of Lpspi_Ip_VS_0_PBcfg.h and Lpspi_Ip_Cfg.h are different" #endif /* Check if Lpspi_Ip_VS_0_PBcfg header file and Spi configuration header file are of the same software version */ #if ((LPSPI_IP_VS_0_SW_MAJOR_VERSION_PBCFG != LPSPI_IP_SW_MAJOR_VERSION_CFG) || \ (LPSPI_IP_VS_0_SW_MINOR_VERSION_PBCFG != LPSPI_IP_SW_MINOR_VERSION_CFG) || \ (LPSPI_IP_VS_0_SW_PATCH_VERSION_PBCFG != LPSPI_IP_SW_PATCH_VERSION_CFG)) #error "Software Version Numbers of Lpspi_Ip_VS_0_PBcfg.h and Lpspi_Ip_Cfg.h are different" #endif /*================================================================================================== * CONSTANTS ==================================================================================================*/ #define LPSPI_IP_CONFIG_EXT \ LPSPI_IP_CONFIG_VS_0_PB \ /** @brief Total number of SpiPhyUnit configured. */ #define LPSPI_IP_NUMBER_OF_INSTANCES (1U) /** @brief Number of FIFO entries supported */ #define LPSPI_IP_FIFO_SIZE_U8 ((uint8)4U) /** @brief HWUnits enabled/disabled */ #define LPSPI_IP_2_ENABLED (STD_ON) #define LPSPI_IP_SLAVE_SUPPORT ((STD_OFF)) /** * @brief Defines if transfers are made using DMA or FIFO. * @details Defines if transfers are made using DMA or FIFO. */ #define LPSPI_IP_DMA_USED (STD_OFF) /** * @brief If enabled, allows dual MCU clock configuration settings. * @details If enabled, allows dual MCU clock configuration settings. */ #define LPSPI_IP_DUAL_CLOCK_MODE (STD_OFF) /** * @brief Enable Dma Fast transfer support. * @details When SpiAutosarExt/SpiEnableDmaFastTransferSupport = TRUE, * the SPI driver can be supported to transfer multiple Jobs, Channels and CPU used only for processing end of Sequence transfer. */ #define LPSPI_IP_ENABLE_DMAFASTTRANSFER_SUPPORT (STD_OFF) /** * @brief Enable User Mode Support. * @details When SpiAutosarExt/SpiEnableUserModeSupport = TRUE, * the SPI driver can be executed from both supervisor and user mode. * * @api */ #define LPSPI_IP_ENABLE_USER_MODE_SUPPORT (STD_OFF) #ifndef MCAL_ENABLE_USER_MODE_SUPPORT #ifdef LPSPI_IP_ENABLE_USER_MODE_SUPPORT #if (STD_ON == LPSPI_IP_ENABLE_USER_MODE_SUPPORT) #error MCAL_ENABLE_USER_MODE_SUPPORT is not enabled. For running Spi in user mode the MCAL_ENABLE_USER_MODE_SUPPORT needs to be defined #endif /* (STD_ON == LPSPI_IP_ENABLE_USER_MODE_SUPPORT) */ #endif /* ifdef MCAL_ENABLE_USER_MODE_SUPPORT */ #endif /* ifndef MCAL_ENABLE_USER_MODE_SUPPORT*/ /** * @brief SPI registers is controlled by REG_PROT IP. */ #define LPSPI_IP_REG_PROT_AVAILABLE (STD_OFF) #if (STD_ON == LPSPI_IP_REG_PROT_AVAILABLE) /** * @brief The protection size */ #define LPSPI_IP_PROT_MEM_U32 ((uint32)4U) #endif /** * @brief Maximum of frame size supported. */ #define LPSPI_IP_FRAMESIZE_MAX_U8 ((uint8)32U) /** * @brief Minimum of frame size supported. */ #define LPSPI_IP_FRAMESIZE_MIN_U8 ((uint8)4U) /** * @brief Define Timeout Method. * @details Define a certain timeout method from OsIf will be used in the driver. */ #define LPSPI_IP_TIMEOUT_METHOD (OSIF_COUNTER_SYSTEM) /** * @brief Switches ON or OFF for the detection and reporting of development errors(API parameter checking) at IP level. */ /** @implements LPSPI_IP_DEV_ERROR_DETECT_define */ #define LPSPI_IP_DEV_ERROR_DETECT (STD_OFF) /** * @brief Half duplex supported. */ /** @implements LPSPI_IP_HALF_DUPLEX_MODE_SUPPORT_define */ #define LPSPI_IP_HALF_DUPLEX_MODE_SUPPORT (STD_OFF) /** * @brief Defines the "Number of Loops" timeout. * @details Defines the "Number of Loops" timeout used Spi_AsyncTransmitHalfDuplex in half duplex mode * during the wait on TX transmission to complete before start next channel that in receive mode or latest channel in job. * One timeout unit means that no TX or RX was executed(the IF statements are returning FALSE). */ #define LPSPI_IP_HALF_DUPLEX_TIMEOUT_COUNTER ((uint32)(50000)) /*================================================================================================== * DEFINES AND MACROS ==================================================================================================*/ /*================================================================================================== * ENUMS ==================================================================================================*/ /*================================================================================================== * STRUCTURES AND OTHER TYPEDEFS ==================================================================================================*/ /*================================================================================================== * GLOBAL VARIABLE DECLARATIONS ==================================================================================================*/ /*================================================================================================== * FUNCTION PROTOTYPES ==================================================================================================*/ #ifdef __cplusplus } #endif #endif /** @} */