Accueil Explorer Aide
S'inscrire Connexion
RuiLiWuLian
/
4G
2
0
Fork 0
Fichiers Tickets 0 Pull Requests 0 Wiki
Aborescence: e4c376cb51
Branches Tags
4G
/
code
/
app
/
AppGlobalVar.c

AppGlobalVar.c 23 KB
Historique Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329 
  1. /*
    2. 

  2.  * @Author       : ChenJie
    3. 

  3.  * @Date         : 2022-01-23 13:45:09
    4. 

  4.  * @Version      : V3.0
    5. 

  5.  * @LastEditors: chenjie
    6. 

  6.  * @LastEditTime: 2022-11-10
    7. 

  7.  * @Description  : file content
    8. 

  8.  * @FilePath: \S32K146_4G\code\app\AppGlobalVar.c
    9. 

  9.  */
    10. 

  10. /*
    11. 

  11.  * AppGlobalVar.c
    12. 

  12.  *应用层全局变量
    13. 

  13.  *  Created on: 2022年1月19日
    14. 

  14.  *      Author: QiXiang_CHENJIE
    15. 

  15.  */
    16. 

  16. 

  17. #include "AppGlobalVar.h"
    18. 

  18. 

  19. #define defaultSn "ZLTEST00000000001"
    20. 

  20. 

  21. #define APP_RELEASE
    22. 

  22. 

  23. #ifdef APP_RELEASE
    24. 

  24. const char WebSiteName[] = "\"iotp.fast-fun.cn\"";
    25. 

  25. uint16 WebSitePort = 8712;
    26. 

  26. #define EEP_START_SEC_VAR_INIT_8_NO_CACHEABLE
    27. 

  27. #include "Eep_MemMap.h"
    28. 

  28. AppConfigBody AppConfigInfo = {false, false, {defaultSn}, {0}};
    29. 

  29. #define EEP_STOP_SEC_VAR_INIT_8_NO_CACHEABLE
    30. 

  30. #include "Eep_MemMap.h"
    31. 

  31. #else
    32. 

  32. const char WebSiteName[] = "\"nas.fast-fun.cn\"";
    33. 

  33. uint16 WebSitePort = 8812;
    34. 

  34. #define EEP_START_SEC_VAR_INIT_8_NO_CACHEABLE
    35. 

  35. #include "Eep_MemMap.h"
    36. 

  36. AppConfigBody AppConfigInfo = {false, true, {defaultSn}, {0}};
    37. 

  37. #define EEP_STOP_SEC_VAR_INIT_8_NO_CACHEABLE
    38. 

  38. #include "Eep_MemMap.h"
    39. 

  39. #endif
    40. 

  40. 

  41. //*全局变量*//
    42. 

  42. const uint32 AppSwVersion = 0x0002010A;
    43. 

  43. const uint8 DataModuleType = 0x02; // 01=NB,02-4G
    44. 

  44. const uint16 HwVersion = 0x0102;
    45. 

  45. const uint32 BlSwVersion = 0x00000002;
    46. 

  46. const uint32 DrvSwVersion = 0x00000004;
    47. 

  47. const uint8 BmsManuFacture = 0xff;
    48. 

  48. const uint8 BmsInfo = 0xff;
    49. 

  49. uint8 TcpbattSN[BATT_SN_LEN] = {0x31};
    50. 

  50. uint8 VIN[17] = {0};
    51. 

  51. volatile uint32 TimerCounter = 0; // ms单位
    52. 

  52. uint32 BattTempR[4] = {0};		  // ADC查询的温度R值
    53. 

  53. uint16 ErrorArray[10] = {0};
    54. 

  54. uint8 Fota_update_flag = 0;
    55. 

  55. boolean Fota_Process_Going = false;
    56. 

  56. uint8 Fota_error_flag = 0;
    57. 

  57. uint8 DeviceErrNum = 0;
    58. 

  58. /*GPS*/
    59. 

  59. QueueHandle_t GpsDataQueueHandle;
    60. 

  60. sint16 xyzData[3] = {0};
    61. 

  61. /*Hal_Can*/
    62. 

  62. uint8 CanIf_u8TxConfirmCnt = 0U;
    63. 

  63. boolean CanIf_bTxFlag = false;
    64. 

  64. uint8 CanIf_u8RxIndicationCnt = 0U;
    65. 

  65. boolean CanIf_bRxFlag = false;
    66. 

  66. QueueHandle_t CanRecvQueueHandle0;
    67. 

  67. QueueHandle_t CanRecvQueueHandle1;
    68. 

  68. QueueHandle_t CanRecvQueueHandle2;
    69. 

  69. 

  70. TaskHandle_t Uart_Hal_RecvTask_Handle, Uart_Hal_SendTask_Handle, MainTask_Handle, Uart0Task_Handle, CanTask_Handle, GpsTask_Handle, Uart_4G_Task_Handle;
    71. 

  71. SemaphoreHandle_t sleep_mutex = NULL;
    72. 

  72. 

  73. bool TcpSysReboot = 0;
    74. 

  74. char ImeiNum[15] = {0};
    75. 

  75. char IccidNum[20] = {0};
    76. 

  76. uint8 CSQValue = 0;
    77. 

  77. sint8 SocketId = -1;
    78. 

  78. sint8 RegChkRet = 0;
    79. 

  79. char WebSiteIp[20] = {0};
    80. 

  80. uint8 TcpWorkState = 0;
    81. 

  81. uint16 DeviceSpeed = 0;
    82. 

  82. 

  83. real_T returnFreq[3][5];
    84. 

  84. real_T returnP[3][5];
    85. 

  85. 

  86. /*以下变量均为App_CAN相关变量*/
    87. 

  87. #ifdef APP_CAN_ENABLE
    88. 

  88. // VCU相关
    89. 

  89. uint8 vehicleStatus = 0;
    90. 

  90. uint8 bmsHVOn = 0;
    91. 

  91. uint8 currentGearPosition = 0;
    92. 

  92. uint8 parkingBreakStatus = 0;
    93. 

  93. uint8 breakingStatus = 0;
    94. 

  94. uint32 ODO = 0;
    95. 

  95. uint8 dcdcWorkStatus = 0;
    96. 

  96. uint8 numOfChrgableSubsys = 0;
    97. 

  97. uint8 chrgableSubsysCode = 0;
    98. 

  98. uint16 vcuDCVol = 0;
    99. 

  99. // EBC相关
    100. 

  100. uint8 ebcStatus = 0;
    101. 

  101. uint8 ebcAskHVOn = 0;
    102. 

  102. uint8 ebcAskHVOff = 0;
    103. 

  103. uint8 retainLockSignal = 0;
    104. 

  104. uint8 dischargeLockSignal = 0;
    105. 

  105. uint8 chargeLockSignal = 0;
    106. 

  106. uint8 chargeFlag = 0;
    107. 

  107. // Bcu相关
    108. 

  108. UINT32 BcuInTable[28] = {
    109. 

  109. 	0x1801D0F3,
    110. 

  110. 	0x1801D8F3,
    111. 

  111. 	0x1880D0F3,
    112. 

  112. 	0x1881D0F3,
    113. 

  113. 	0x1882D0F3,
    114. 

  114. 	0x1883D0F3,
    115. 

  115. 	0x1884D0F3,
    116. 

  116. 	0x1885D0F3,
    117. 

  117. 	0x1886D0F3,
    118. 

  118. 	0x1887D0F3,
    119. 

  119. 	0x1888D0F3,
    120. 

  120. 	0x1889D0F3,
    121. 

  121. 	0x188AD0F3,
    122. 

  122. 	0x18C1D0F3,
    123. 

  123. 	0x18C2D0F3,
    124. 

  124. 	0x18E1D0F3,
    125. 

  125. 	0x18E2D0F3,
    126. 

  126. 	0x18E3D0F3,
    127. 

  127. 	0x18E4D0F3,
    128. 

  128. 	0x18E5D0F3,
    129. 

  129. 	0x18E6D0F3,
    130. 

  130. 	0x18F1D0F3,
    131. 

  131. 	0x18F2D0F3,
    132. 

  132. 	0x18F3D0F3,
    133. 

  133. 	0x18F4D0F3,
    134. 

  134. 	0x18F5D0F3,
    135. 

  135. 	0x18FF45F4,
    136. 

  136. 	0x18FFC13A,
    137. 

  137. };
    138. 

  138. BOOL BcuRxShortError[28];
    139. 

  139. BOOL BcuRxLongError[28];
    140. 

  140. UINT8 BcuRxErrorCounter[28];
    141. 

  141. UINT8 BcuRxFlag[28];
    142. 

  142. /************************************************************
    143. 

  143.  *BCU->4G解码变量存放区
    144. 

  144.  ************************************************************/
    145. 

  145. UINT8 BMS_CellRecvFlg = 0;						//电压收取标志位
    146. 

  146. UINT8 canRecvFramNum[BMS_CELL_MAX_NUM/3] = {0};
    147. 

  147. UINT8 BMS_ReqVIN = 0x00;						// 是否请求VIN码,0:预留;1:请求VIN;2:不请求VIN;3:无效;,Re-1,Off-0,
    148. 

  148. UINT8 BMS_ReqHVOff = 0x00;						// 是否请求下高压,0:预留;1:请求下高压;2:不请求下高压;3:无效;,Re-1,Off-0,
    149. 

  149. UINT8 BMS_ProtocolEditionH = 0x00;				// 通讯协议版本高位(例 : 版本为3 .1, 则此处发3),	, Re - 1, Off - 0,
    150. 

  150. UINT8 BMS_ProtocolEditionL = 0x00;				// 通讯协议版本低位(例 : 版本为3 .1, 则此处发1),	, Re - 1, Off - 0,
    151. 

  151. UINT8 BMS_CharDevNum = 0x00;					// 可充电装置系统序号(BMS是整车中可充电装置系统中的第几个, 需要整车告知),1,Re-1,Off-0,
    152. 

  152. UINT8 BMS_FtPosRly = 0x00;						// 主正继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    153. 

  153. UINT8 BMS_FtNegRly = 0x00;						// 主负继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    154. 

  154. UINT8 BMS_FtPosCharRly1 = 0x00;					// 充正1继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    155. 

  155. UINT8 BMS_FtNegCharRly1 = 0x00;					// 充负1继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    156. 

  156. UINT8 BMS_FtPosCharRly2 = 0x00;					// 充正2继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    157. 

  157. UINT8 BMS_FtNegCharRly2 = 0x00;					// 充负2继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    158. 

  158. UINT8 BMS_FtHeatRly1 = 0x00;					// 加热1/正继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    159. 

  159. UINT8 BMS_FtHeatRly2 = 0x00;					// 加热2/负继电器粘连故障,0:正常; 1:故障,Re-1,Off-0,
    160. 

  160. UINT8 BMS_StPosRly = 0x00;						// 主正继电器状态(如继电器状态由BMS检测),0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    161. 

  161. UINT8 BMS_StNegRly = 0x00;						// 主负继电器状态(如继电器状态由BMS检测),0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    162. 

  162. UINT8 BMS_StPreCharRly = 0x00;					// 预充继电器状态,0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    163. 

  163. UINT8 BMS_StPosCharRly1 = 0x00;					// 直流充正继电器1状态,0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    164. 

  164. UINT8 BMS_StNegCharRly1 = 0x00;					// 直流充负继电器1状态,0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    165. 

  165. UINT8 BMS_StPosCharRly2 = 0x00;					// 直流充正继电器2状态,0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    166. 

  166. UINT8 BMS_StNegCharRly2 = 0x00;					// 直流充负继电器2状态,0:预留;1:开启;2:闭合;3:无效;,Re-1,Off-0,
    167. 

  167. UINT8 BMS_FtAuxRelayWeld = 0x00;				// 附件继电器粘连故障(保留),0:正常; 1:故障,Re-1,Off-0,
    168. 

  168. UINT8 BMS_BraOpenCirc = 0x00;					// 支路断路故障,0:正常; 1:故障,Re-1,Off-0,
    169. 

  169. UINT8 BMS_FtBackCharCurrOutLim = 0x00;			// 回充电流超限报警,0:正常1 : 1级 轻微故障 2 : 2级 较严重故障 3 : 3级 最严重故障, Re - 1, Off - 0,
    170. 

  170. UINT8 BMS_FtPosRlyOpen = 0x00;					// 主正继电器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    171. 

  171. UINT8 BMS_FtNegRlyOpen = 0x00;					// 主负继电器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    172. 

  172. UINT8 BMS_FtPosCharRly1Open = 0x00;				// 直流充电正1继电器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    173. 

  173. UINT8 BMS_FtPosCharRly2Open = 0x00;				// 直流充电正2继电器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    174. 

  174. UINT8 BMS_FtNegCharRly1Open = 0x00;				// 直流充电负1继电器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    175. 

  175. UINT8 BMS_FtNegCharRly2Open = 0x00;				// 直流充电负2继电器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    176. 

  176. UINT8 BMS_FtTMSContClose = 0x00;				// 加热膜或TMS接触器无法断开报警,0:正常; 1:故障,Re-1,Off-0,
    177. 

  177. UINT8 BMS_FtTMSContOpen = 0x00;					// 加热膜或TMS接触器无法闭合报警,0:正常; 1:故障,Re-1,Off-0,
    178. 

  178. UINT8 BMS_FtTMS = 0x00;							// 热管理系统故障,0:正常; 1:故障,Re-1,Off-0,
    179. 

  179. UINT8 BMS_Ft24VSpy = 0x00;						// BMS 24V供电异常报警,0:正常; 1:故障,Re-1,Off-0,
    180. 

  180. UINT8 BMS_FtPACKSelfProt = 0x00;				// 电池包自保护报警,0:正常; 1:故障,Re-1,Off-0,
    181. 

  181. UINT8 BMS_FtCharSockTempOver = 0x00;			// 充电插座过温报警,0:正常1 : 1级 轻微故障 2 : 2级 较严重故障 3 : 3级 最严重故障, Re - 1, Off - 0,
    182. 

  182. UINT8 BMS_FtTempOutCtrl = 0x00;					// 热失控报警,0:正常; 1:故障,Re-1,Off-0,
    183. 

  183. UINT8 BMS_StPosHeatRly = 0x00;					// 加热正继电器状态,0:保留;1:开启;2:闭合;3:无效,Re-1,Off-0,
    184. 

  184. UINT8 BMS_StNegHeatRly = 0x00;					// 加热负继电器状态,0:保留;1:开启;2:闭合;3:无效,Re-1,Off-0,
    185. 

  185. UINT8 BMS_CharSysNum = 0x00;					// 可充电储能子系统总数(保留),,Re-1,Off-0,
    186. 

  186. UINT8 BMS_FtCode = 0x00;						// 电池系统故障码,详见附表电池系统故障码列表,Re-1,Off-0,
    187. 

  187. UINT8 BMS_ST1CheckSum = 0x00;					// B2V_ST1的CheckSum,Byte0=Byte1 XOR Byte2 XOR Byte3 XOR Byte4 XOR Byte5 XOR Byte6 XOR Byte7,Re-1,Off-0,
    188. 

  188. UINT8 BMS_ST1Counter = 0x00;					// B2V_ST1的生命信号,0~14循环,15:信号无效,Re-1,Off-0,
    189. 

  189. UINT8 BMS_Mode = 0x00;							// BMS当前状态,和新版协议不匹配
    190. 

  190. UINT8 BMS_AuxRlySt = 0x00;						// 附件继电器状态,0:开启;1:闭合;,Re-1,Off-0,
    191. 

  191. UINT8 BMS_BattBalaSt = 0x00;					// BMS当前均衡状态,0:未开启均衡;1:开启均衡;,Re-1,Off-0,
    192. 

  192. UINT8 BMS_CharGunSt = 0x00;						// 直流充电枪连接状态,0:未连接1 : 连接, Re - 1, Off - 0,
    193. 

  193. UINT8 BMS_CharMode = 0x00;						// BMS当前充电模式,0:预留1 : 直流充电 2 : 交流充电 3 : 其他充电, Re - 1, Off - 0,
    194. 

  194. UINT8 BMS_CharSt = 0x00;						// 充电状态,0:可以充电1 : 正在充电 2 : 充电结束 3 : 充电故障, Re - 1, Off - 0,
    195. 

  195. UINT8 BMS_FtLvl = 0x00;							// 当前最高故障等级,0:正常1 : 1级 轻微故障 2 : 2级 较严重故障 3 : 3级 最严重故障, Re - 1, Off - 0,
    196. 

  196. UINT8 BMS_FtCellTempDiff = 0x00;				// 电芯温差异常报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    197. 

  197. UINT8 BMS_FtCellTempHigh = 0x00;				// 电芯温度过高报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    198. 

  198. UINT8 BMS_FtPACKOverVolt = 0x00;				// PACK过压报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    199. 

  199. UINT8 BMS_FtPACKUndeVolt = 0x00;				// PACK欠压报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    200. 

  200. UINT8 BMS_FtSOCLow = 0x00;						// SOC过低报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    201. 

  201. UINT8 BMS_FtCellOverVolt = 0x00;				// 单体电压过高报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    202. 

  202. UINT8 BMS_FtCellUndeVolt = 0x00;				// 单体电压欠压报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    203. 

  203. UINT8 BMS_FtIns = 0x00;							// 绝缘报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    204. 

  204. UINT8 BMS_FtCellOverVoltDiff = 0x00;			// 单体压差过大,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    205. 

  205. UINT8 BMS_FtCharCurrOver = 0x00;				// 充电电流过大报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    206. 

  206. UINT8 BMS_FtDisCharCurrOver = 0x00;				// 放电电流过大报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    207. 

  207. UINT8 BMS_FtCellTempLow = 0x00;					// 电芯温度过低报警,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    208. 

  208. UINT8 BMS_FtBranVoltDifOver = 0x00;				// 支路压差过大报警(存在并联支路的系统),0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    209. 

  209. UINT8 BMS_FtBMSHardWare = 0x00;					// BMS硬件故障,0:无故障; 1:1级 轻微故障; 2:2级 较严重故障3 : 3级 最严重故障, Re - 1, Off - 0,
    210. 

  210. UINT8 BMS_FtSOCHigh = 0x00;						// SOC过高报警,0:正常; 1:故障,Re-1,Off-0,
    211. 

  211. UINT8 BMS_FtSOCJump = 0x00;						// SOC跳变报警,0:正常; 1:故障,Re-1,Off-0,
    212. 

  212. UINT8 BMS_FtInCom = 0x00;						// BMS内部通信故障,0:正常; 1:故障,Re-1,Off-0,
    213. 

  213. UINT8 BMS_FtSysMism = 0x00;						// BMS/可充电储能系统不匹配报警,0:正常; 1:故障,Re-1,Off-0,
    214. 

  214. UINT8 BMS_FtHvIntLock = 0x00;					// 高压互锁报警,0:正常; 1:故障,Re-1,Off-0,
    215. 

  215. UINT8 BMS_FtSmoke = 0x00;						// 火警探测器故障,0:正常; 1:故障,Re-1,Off-0,
    216. 

  216. UINT8 BMS_FtFire = 0x00;						// 电池包火灾报警,0:正常; 1:故障,Re-1,Off-0,
    217. 

  217. UINT8 BMS_FtNum = 0x00;							// BMS当前发生的故障总数目(包括GB32960中规定的故障数目),,Re-1,Off-0,
    218. 

  218. UINT8 BMS_PackSOC = 0x00;						// 电池包SOC,,Re-0.4,Off-0,
    219. 

  219. UINT8 BMS_PackSOH = 0x00;						// 电池包SOH,,Re-0.4,Off-0,
    220. 

  220. UINT8 BMS_MaxCellTemp = 0x00;					// 单体最高温度,,Re-1,Off--50,℃
    221. 

  221. UINT8 BMS_MinCellTemp = 0x00;					// 单体最低温度,,Re-1,Off--50,℃
    222. 

  222. UINT8 BMS_AverCellTemp = 0x00;					// 单体平均温度,,Re-1,Off--50,℃
    223. 

  223. UINT8 BMS_MaxCellTempCSC = 0x00;				// 最高温度电芯所在子系统(CSC)编号,范围(1~255),Re-1,Off-0,
    224. 

  224. UINT8 BMS_MaxCellTempNum = 0x00;				// 最高温度电芯所在子系统(CSC)内温度探针编号,范围(1~255),Re-1,Off-0,
    225. 

  225. UINT8 BMS_MinCellTempCSC = 0x00;				// 最低温度电芯所在子系统(CSC)编号,范围(1~255),Re-1,Off-0,
    226. 

  226. UINT8 BMS_MinCellTempNum = 0x00;				// 最低温度电芯所在子系统(CSC)内温度探针编号,范围(1~255),Re-1,Off-0,
    227. 

  227. UINT8 BMS_MaxCellVoltCSC = 0x00;				// 最高电压电芯所在子系统(CSC)编号,范围(1~255),Re-1,Off-0,
    228. 

  228. UINT8 BMS_MaxCellVoltNum = 0x00;				// 最高电压电芯所在子系统(CSC)内单体编号,范围(1~255),Re-1,Off-0,
    229. 

  229. UINT8 BMS_MinCellVoltCSC = 0x00;				// 最低电压电芯所在子系统(CSC)编号,范围(1~255),Re-1,Off-0,
    230. 

  230. UINT8 BMS_MinCellVoltNum = 0x00;				// 最低电压电芯所在子系统(CSC)内单体编号,范围(1~255),Re-1,Off-0,
    231. 

  231. UINT8 BMS_InsDeteSt = 0x00;						// BMS绝缘检测状态,0:停止检测;1:激活检测;,Re-1,Off-0,
    232. 

  232. UINT8 BMS_FtCharInsLow = 0x00;					// 充电绝缘阻值低,0:正常; 1:故障,Re-1,Off-0,
    233. 

  233. UINT8 BMS_FtCurrSenr = 0x00;					// 电流传感器故障,0:正常; 1:故障,Re-1,Off-0,
    234. 

  234. UINT8 BMS_FtHeatingFilm = 0x00;					// 加热膜加热回路故障,0:正常; 1:故障,Re-1,Off-0,
    235. 

  235. UINT8 BMS_FtMainLoopPreChar = 0x00;				// 主回路预充或预检故障,0:正常; 1:故障,Re-1,Off-0,
    236. 

  236. UINT8 BMS_FtAuxLoopPreChar = 0x00;				// 辅件回路预充或预检故障,0:正常; 1:故障,Re-1,Off-0,
    237. 

  237. UINT8 BMS_FtACANLost = 0x00;					// ACAN/整车CAN通讯故障,0:正常; 1:故障,Re-1,Off-0,
    238. 

  238. UINT8 BMS_FtDCDC = 0x00;						// BMS-DC-DC故障,0:正常; 1:故障,Re-1,Off-0,
    239. 

  239. UINT8 BMS_FtSOCDif = 0x00;						// SOC差异过大,0:正常; 1:故障,Re-1,Off-0,
    240. 

  240. UINT8 BMS_FtCellOverDisChar = 0x00;				// 电芯过放故障,0:正常; 1:故障,Re-1,Off-0,
    241. 

  241. UINT8 BMS_FtCharOver = 0x00;					// 车载储能装置过充报警,0:正常;1:1级 轻微故障;2:2级 较严重故障3 : 10级 最严重故障, Re - 1, Off - 0,
    242. 

  242. UINT8 BMS_FtContDisCharCurrOverLoad = 0x00;		// 持续回充过流故障,0:正常;1:1级 轻微故障;2:2级 较严重故障3 : 10级 最严重故障, Re - 1, Off - 0,
    243. 

  243. UINT8 BMS_FtContCharCurrOverLoad = 0x00;		// 持续放电过流故障,0:正常;1:1级 轻微故障;2:2级 较严重故障3 : 10级 最严重故障, Re - 1, Off - 0,
    244. 

  244. UINT8 BMS_Gun1DCNegTemp = 0x00;					// 充电口1负温感值,,Re-1,Off--40,℃
    245. 

  245. UINT8 BMS_Gun1DCPosTemp = 0x00;					// 充电口1正温感值,,Re-1,Off--40,℃
    246. 

  246. UINT8 BMS_Gun2DCNegTemp = 0x00;					// 充电口2负温感值,,Re-1,Off--40,℃
    247. 

  247. UINT8 BMS_Gun2DCPosTemp = 0x00;					// 充电口2正温感值,,Re-1,Off--40,℃
    248. 

  248. UINT8 BMS_CurrHeatSt = 0x00;					// 当前加热状态,0:未加热;1:加热中;2:预留;3:无效;,Re-1,Off-0,
    249. 

  249. UINT8 BMS_CurrCoolSt = 0x00;					// 当前冷却状态,0:未冷却;1:冷却中;2:预留;3:无效;,Re-1,Off-0,
    250. 

  250. UINT8 BMS_FtCharCnct = 0x00;					// 插枪连接信号异常,0:正常; 1:故障,Re-1,Off-0,
    251. 

  251. UINT8 BMS_FtOverDisCharCurrDuringChar = 0x00;	// 充电时放电电流过大,0:正常; 1:故障,Re-1,Off-0,
    252. 

  252. UINT8 BMS_FtCharNTC = 0x00;						// 充电插座NTC故障,0:正常; 1:故障,Re-1,Off-0,
    253. 

  253. UINT8 BMS_FtELock = 0x00;						// 电子锁故障,0:正常; 1:故障,Re-1,Off-0,
    254. 

  254. UINT8 BMS_CellVoltFramNum = 0x00;				// 单体电压帧序号,有效值1~255,Re-1,Off-0,
    255. 

  255. UINT8 BMS_CellTempFramNum = 0x00;				// 温度帧序号,有效值1~255,Re-1,Off-0,
    256. 

  256. UINT8 BMS_CSC_Code = 0x00;						// 子系统编号CSC,有效值1~255,Re-1,Off-0,
    257. 

  257. UINT8 BMS_CellTemp[BMS_TEMP_MAX_NUM] = {0x00};	// 当前CSC下的第N个探针的温度,255 "Invalid" 0xFF 无效有效值 0 ~254, 单位 ℃, 范围(-50 ~204)℃, , Re - 1, Off-- 50,℃
    258. 

  258. UINT8 BMS_Checksum = 0x00;						// 电池编码信息1的CheckSum,Byte0=Byte1 XOR Byte2 XOR Byte3 XOR Byte4 XOR Byte5 XOR Byte6 XOR Byte7,Re-1,Off-0,
    259. 

  259. UINT8 BMS_PackComp = 0x00;						// 电池厂家,1:"CATL" 2:"Li Shen" 3:"MGL" 4:"SAMSUN" 5:"LG",Re-1,Off-0,
    260. 

  260. UINT8 BMS_BattCodeLeng = 0x00;					// 电池编码长度,0:Do not transmit this Code,Re-1,Off-0,
    261. 

  261. UINT8 BMS_SN[27] = {0};							// 电池编码(SN)字符1(ASCII),,Re-1,Off-0,
    262. 

  262. UINT8 BMS_BattType = 0x00;						// 电池类型,1:铅酸电池; 2:镍氢电池; 3:磷酸铁锂电池; 4:锰酸锂电池; 5:钴酸锂电池; 6:三元材料电池; 7:聚合物锂离子电池; 8:钛酸锂电池; 9:超级电容; 10~13:保留; 14:燃料电池;15:保留,Re-1,Off-0,
    263. 

  263. UINT8 BMS_CoolType = 0x00;						// 电池冷却方式,0:其他冷却方式1 : 自然冷却 2 : 风扇冷却 3 : 水冷却, Re - 1, Off - 0,
    264. 

  264. UINT8 BMS_CSC_Total = 0x00;						// 电池系统中CSC总的数目,,Re-1,Off-0,
    265. 

  265. UINT8 BMS_CellVoltLevel = 0x00;					// 单体平台电压(非实时变化的值),有效值0~5V;  255 "Signal Invalid" 0xFF 无效,Re-0.1,Off-0,V
    266. 

  266. UINT8 BMS_CellMinVolt = 0x00;					// 单体可用最低电压(非实时变化的值),有效值0~5V;  255 "Signal Invalid" 0xFF 无效,Re-0.1,Off-0,V
    267. 

  267. UINT8 BMS_CellMaxVolt = 0x00;					// 单体可用最高电压(非实时变化的值),有效值0~5V;  255 "Signal Invalid" 0xFF 无效,Re-0.1,Off-0,V
    268. 

  268. UINT8 BMS_HVBranNum = 0x00;						// 电池系统高压支路数,,Re-1,Off-0,
    269. 

  269. UINT8 BMS_SingleHVBranchCellNum = 0x00;			// 电池系统单支路电芯数,,Re-1,Off-0,
    270. 

  270. UINT8 BMS_ReqMode = 0x00;						// BMS请求设定模式,0:关机模式1 : 制冷模式 2 : 制热模式 3 : 自循环模式, Re - 1, Off - 0,
    271. 

  271. UINT8 BMS_HVCmd = 0x00;							// 高压请求,0:请求上高压1 : 请求下高压, Re - 1, Off - 0,
    272. 

  272. UINT8 BMS_ChgSts = 0x00;						// 充电状态,0:非充电1 : 充电, Re - 1, Off - 0,
    273. 

  273. UINT8 BMS_HVRelaySts = 0x00;					// BMS高压继电器状态,0:断开状态; 1:闭合状态; 2~3:无效,Re-1,Off-0,
    274. 

  274. UINT8 BMS_SetTemp = 0x00;						// 设定温度,,Re-1,Off--40,
    275. 

  275. UINT8 BMS_Life = 0x00;							// BMS生命帧,,Re-1,Off-0,
    276. 

  276. UINT8 BMS_CRC = 0x00;							// CRC校验值,,Re-1,Off-0,
    277. 

  277. UINT8 TMS_WorkStatus = 0x00;					// TMS工作状态,0:关机模式1 : 制冷模式 2 : 制热模式 3 : 自循环模式, Re - 1, Off - 0,
    278. 

  278. UINT8 TMS_HVRelayST = 0x00;						// TMS高压继电器状态,0:断开状态; 1:闭合状态; 2~3:无效,Re-1,Off-0,
    279. 

  279. UINT8 TMS_OutletTemp = 0x00;					// 出水温度(机组到电池),255:无效,Re-1,Off--40,
    280. 

  280. UINT8 TMS_InletTemp = 0x00;						// 回水温度(电池到机组),255:无效,Re-1,Off--40,
    281. 

  281. UINT8 TMS_ErrCode = 0x00;						// TMS故障码,0:无故障; 出现 1 种以上循环发送,Re-1,Off-0,
    282. 

  282. UINT8 TMS_FaultLevel = 0x00;					// TMS故障码等级,0:无效1 : 1级故障 2 : 2级故障 3 : 3级故障, Re - 1, Off - 0,
    283. 

  283. UINT16 BMS_SoftwareVersion = 0x00;				// 软件版本号:RyyyBzzz(R为软件版本、B为测试版本、正式版本不带B)  ,yyy:0~254,精度1,255:无效,不显示;zzz:0~254,精度1,255:无效,不显示;
    284. 

  284. UINT16 BMS_HardwareVersion = 0x00;				// 硬件版本号:VyyyBzzz(V为硬件版本、B为测试版本、正式版本不带B)  ,,Re-1,Off-0,
    285. 

  285. UINT16 BMS_PackCurr = 0x00;						// 电池包总电流,充电为负值,放电为正值,,Re-0.1,Off--1000,A
    286. 

  286. UINT16 BMS_MaxCharCurr = 0x00;					// 电池包最大回充电流,,Re-0.1,Off--1000,A
    287. 

  287. UINT16 BMS_MaxDisCharCurr = 0x00;				// 电池包最大放电电流,,Re-0.1,Off--1000,A
    288. 

  288. UINT16 BMS_PosIns = 0x00;						// 母线正对车体绝缘电阻,,Re-1,Off-0,KΩ
    289. 

  289. UINT16 BMS_NegIns = 0x00;						// 母线负对车体绝缘电阻,,Re-1,Off-0,KΩ
    290. 

  290. UINT16 BMS_BattVolt = 0x00;						// 电池包内侧电压,,Re-0.1,Off-0,V
    291. 

  291. UINT16 BMS_LinkVolt = 0x00;						// 电池包外侧电压,,Re-0.1,Off-0,V
    292. 

  292. UINT16 BMS_MaxCellVolt = 0x00;					// 单体最高电压值,,Re-0.001,Off-0,V
    293. 

  293. UINT16 BMS_AverCellVolt = 0x00;					// 电芯电压平均值,,Re-0.001,Off-0,V
    294. 

  294. UINT16 BMS_MinCellVolt = 0x00;					// 电芯最低电压值,,Re-0.001,Off-0,V
    295. 

  295. UINT16 BMS_ContChrgCurr = 0x00;					// BMS允许的持续回充电流,,Re-0.1,Off-0,A
    296. 

  296. UINT16 BMS_ContDisCharCurr = 0x00;				// BMS允许的持续放电电流,,Re-0.1,Off--1000,A
    297. 

  297. UINT16 BMS_CharReqVolt = 0x00;					// 充电所需电压(交流),,Re-0.1,Off-0,V
    298. 

  298. UINT16 BMS_CharReqCurr = 0x00;					// 充电所需电流(交流),,Re-0.1,Off--1000,A
    299. 

  299. UINT16 BMS_SysInsRes = 0x00;					// 系统绝缘电阻,,Re-1,Off-0,KΩ
    300. 

  300. UINT16 BMS_MaxDisCharPwr = 0x00;				// 最大允许放电功率,,Re-0.1,Off-0,kw
    301. 

  301. UINT16 BMS_MaxCharPwr = 0x00;					// 最大允许充电功率,,Re-0.1,Off-0,kw
    302. 

  302. UINT16 BMS_ContDisCharPwr = 0x00;				// BMS允许的持续放电功率,,Re-0.1,Off-0,kw
    303. 

  303. UINT16 BMS_ContCharPwr = 0x00;					// BMS允许的持续充电功率,,Re-0.1,Off-0,kw
    304. 

  304. UINT16 BMS_InstEngyCons = 0x00;					// 动力电池瞬时百公里能耗,,Re-0.1,Off-0,kwh
    305. 

  305. UINT16 BMS_TotalEngyCons = 0x00;				// 动力电池总/平均百公里能耗,,Re-0.1,Off-0,kwh
    306. 

  306. UINT16 BMS_SOE = 0x00;							// 剩余电量,,Re-0.01,Off-0,kwh
    307. 

  307. UINT16 BMS_RmanCharTime = 0x00;					// 剩余充电时间,,Re-1,Off-0,min
    308. 

  308. UINT16 BMS_CharNum = 0x00;						// 充电次数,,Re-1,Off-0,
    309. 

  309. UINT16 BMS_CellVolt[BMS_CELL_MAX_NUM] = {0x00}; // 电芯的电压,65535 "Invalid" 0xFFFF 无效有效值 0 ~65534, 范围(0 ~65.534) V, Re - 0.001, Off - 0, V
    310. 

  310. UINT16 BMS_BattRateCap = 0x00;					// 电池包额定容量,有效值 0~65534,65535 "Signal Invalid" 无效,Re-1,Off-0,Ah
    311. 

  311. UINT16 BMS_BattRateVolt = 0x00;					// 电池包额定电压,有效值 0~6553.4,65535 "Signal Invalid" 无效,Re-0.1,Off-0,V
    312. 

  312. UINT16 BMS_BattRateEngy = 0x00;					// 电池包额定能量,有效值 0~6553.4,65535 "Signal Invalid" 无效,Re-0.1,Off-0,kWh
    313. 

  313. UINT16 BMS_CellTotal = BMS_CELL_MAX_NUM;		// PACK中单体电芯的总数目,,Re-1,Off-0,//
    314. 

  314. UINT16 BMS_TempTotal = BMS_TEMP_MAX_NUM;		// PACK中电芯温度点(探针)的总数目,,Re-1,Off-0,
    315. 

  315. UINT16 BMS_SingleCharEngy = 0x00;				// 单次充电kWh 数,,Re-0.1,Off-0,KWh
    316. 

  316. UINT16 BMS_SingleCharCapy = 0x00;				// 单次充电Ah 数,,Re-0.1,Off-0,Ah
    317. 

  317. UINT16 BMS_HVVolt = 0x00;						// BMS当前电压,,Re-1,Off-0,
    318. 

  318. UINT16 TMS_ReqPow = 0x00;						// TMS需求功率,65535:无效,Re-0.1,Off-0,Kw
    319. 

  319. UINT32 BMS_TotalCharEngy = 0x00;				// 累计充入kWh 数,,Re-0.1,Off-0,KWh
    320. 

  320. UINT32 BMS_TotalDisCharEngy = 0x00;				// 累计放出kWh 数,,Re-0.1,Off-0,KWh
    321. 

  321. UINT32 BMS_TotalBackCharEngy = 0x00;			// 累计动能回馈充入kWh 数,,Re-0.1,Off-0,KWh
    322. 

  322. UINT32 BMS_TotalStaCharEngy = 0x00;				// 累计换电站充入kWh 数,,Re-0.1,Off-0,KWh
    323. 

  323. UINT32 BMS_TotalGunCharEngy = 0x00;				// 累计插枪充电充入kWh 数,,Re-0.1,Off-0,KWh
    324. 

  324. UINT32 BMS_TotalGunCharCapy = 0x00;				// 累计插枪充电充入Ah 数,,Re-0.1,Off-0,Ah
    325. 

  325. UINT32 BMS_TotalCharCapy = 0x00;				// 累计充入Ah 数,,Re-0.1,Off-0,Ah
    326. 

  326. UINT32 BMS_TotalDisCharCapy = 0x00;				// 累计放出Ah 数,,Re-0.1,Off-0,Ah
    327. 

  327. UINT32 BMS_TotalBackCharCapy = 0x00;			// 累计动能回馈充入Ah 数,,Re-0.1,Off-0,Ah
    328. 

  328. UINT32 BMS_TotalStaCharCapy = 0x00;				// 累计换电站充入Ah 数,,Re-0.1,Off-0,Ah
    329. 

  329. #endif
    330.