4G/generate/include/Adc_CfgDefines.h

/*==================================================================================================
*   Project              : RTD AUTOSAR 4.4
*   Platform             : CORTEXM
*   Peripheral           : ADC
*   Dependencies         : none
*
*   Autosar Version      : 4.4.0
*   Autosar Revision     : ASR_REL_4_4_REV_0000
*   Autosar Conf.Variant :
*   SW Version           : 1.0.0
*   Build Version        : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907
*
*   (c) Copyright 2020-2021 NXP Semiconductors
*   All Rights Reserved.
*
*   NXP Confidential. This software is owned or controlled by NXP and may only be
*   used strictly in accordance with the applicable license terms. By expressly
*   accepting such terms or by downloading, installing, activating and/or otherwise
*   using the software, you are agreeing that you have read, and that you agree to
*   comply with and are bound by, such license terms. If you do not agree to be
*   bound by the applicable license terms, then you may not retain, install,
*   activate or otherwise use the software.
==================================================================================================*/

#ifndef ADC_CFGDEFINES_H
#define ADC_CFGDEFINES_H

/**
*   @file
*
*   @addtogroup adc_driver_config Adc Driver Configuration
*   @{
*/

#ifdef __cplusplus
extern "C"{
#endif

/*==================================================================================================
*                                        INCLUDE FILES
* 1) system and project includes
* 2) needed interfaces from external units
* 3) internal and external interfaces from this unit
==================================================================================================*/

/*==================================================================================================
*                              SOURCE FILE VERSION INFORMATION
==================================================================================================*/

#define ADC_VENDOR_ID_CFGDEFINES_H                      43
#define ADC_AR_RELEASE_MAJOR_VERSION_CFGDEFINES_H       4
#define ADC_AR_RELEASE_MINOR_VERSION_CFGDEFINES_H       4
#define ADC_AR_RELEASE_REVISION_VERSION_CFGDEFINES_H    0
#define ADC_SW_MAJOR_VERSION_CFGDEFINES_H               1
#define ADC_SW_MINOR_VERSION_CFGDEFINES_H               0
#define ADC_SW_PATCH_VERSION_CFGDEFINES_H               0

/*==================================================================================================
*                                     FILE VERSION CHECKS
==================================================================================================*/

/*==================================================================================================
*                                          CONSTANTS
==================================================================================================*/

/*==================================================================================================
*                                      DEFINES AND MACROS
==================================================================================================*/

/**
* @brief          CMR register not present on this platform.
*/
#define ADC_CMR_REGISTER_NOT_SUPPORTED

/**
* @brief          Specifies if Current channel is used
*/
#define ADC_CURRENT_CHANNEL_USED

/**
* @brief          Multicore feature is disabled on this platform.
*/
#define ADC_MULTICORE_SUPPORT               (STD_OFF)

/**
* @brief          Number of configured partitions.
*/
#define ADC_MAX_PARTITIONS                  (1U)

/**
* @brief          ADC unit 0 available
*/
#define ADC_UNIT_0                          (0U)

/**
* @brief          ADC unit 1 available
*/
#define ADC_UNIT_1                          (1U)


/**
* @brief           Adds/removes ((STD_ON)/(STD_OFF)) the services Adc_EnableHardwareTrigger() and Adc_DisableHardwareTrigger() from the code.
*/
#define ADC_HW_TRIGGER_API                  (STD_ON)

/**
* @brief           AdcSetHwUnitPowerMode api enabled/disabled ((STD_ON)/(STD_OFF)).
*/
#define ADC_SET_HW_UNIT_POWER_MODE_API                    (STD_OFF)

/**
* @brief           Enables or disables limit checking feature in the ADC driver.
*/
#define ADC_ENABLE_LIMIT_CHECK              (STD_OFF)

/**
* @brief           Group notification mechanism is/is not ((STD_ON)/(STD_OFF)) available at runtime.
*/
#define ADC_GRP_NOTIF_CAPABILITY            (STD_ON)

/**
* @brief           Type of prioritization mechanism ADC_PRIORITY_HW, ADC_PRIORITY_HW_SW and ADC_PRIORITY_NONE.
*/
/* SWS_Adc_00522 */
#define ADC_PRIORITY_HW                     (0U)
#define ADC_PRIORITY_HW_SW                  (1U)
#define ADC_PRIORITY_NONE                   (2U)

/**
* @brief           Priority implementation.
*/
#define ADC_PRIORITY_IMPLEMENTATION         (ADC_PRIORITY_NONE)

/**
* @brief           Type of alignment mechanism ADC_ALIGN_RIGHT, ADC_ALIGN_LEFT.
*/
/* SWS_Adc_00525 */
#define ADC_ALIGN_RIGHT                     (0U)
#define ADC_ALIGN_LEFT                      (1U)

/**
* @brief           Result Alignment.
*/
#define ADC_RESULT_ALIGNMENT                (ADC_ALIGN_RIGHT)

/**
* @brief         This is a timeout value which is used to wait until
*                  - the conversion is not aborted.
*                  - ADC hardware is not entered in power down state.
*                  - ADC hardware is not entered in idle state.
*/
#define ADC_TIMEOUT_COUNTER                 (100000UL)

/**
* @brief           Specifies for reducing the number of interrupts for streaming groups
*/
#define ADC_OPTIMIZE_DMA_STREAMING_GROUPS   (STD_OFF)



/**
* @brief           Specifies to optimize conversions for hw triggered, one shot group.
*/
#define ADC_OPTIMIZE_ONESHOT_HW_TRIGGER     (STD_OFF)

/**
* @brief           Specifies to configure BCTU/CTU list at initialization for ctu hardware trigger mode groups.
*/
#define ADC_CTU_HW_TRIGGER_OPTIMIZATION     (STD_OFF)

/**
 * @brief   Define the number of maximum hardware unit configured
 */
#define ADC_MAX_HW_UNITS_CFG                      (1U)

/**
* @brief           Add/Remove Autosar Extension Adc_EnableChannel() and Adc_DisableChannel() api.
*/
#define ADC_ENABLE_CH_DISABLE_CH_NONAUTO_API      (STD_OFF)

/**
* @brief           Get injected conversion status api enabled/disabled (STD_ON/STD_OFF).
*/
#define ADC_GET_INJECTED_CONVERSION_STATUS_API    (STD_OFF)

/**
* @brief           Adc transfer type.
*/
#ifdef ADC_DMA_SUPPORTED
#define ADC_DMA                             (0U)
#endif /* ADC_DMA_SUPPORTED */
#define ADC_INTERRUPT                       (1U)

/**
* @brief          Add/Remove Autosar Extension Adc_SetClockMode().
*/
#define ADC_DUAL_CLOCK_MODE                       (STD_OFF)

/**
* @brief          Add/remove ((STD_ON)/(STD_OFF)) the service Adc_Calibration() from the code.
*/
#define ADC_CALIBRATION                           (STD_ON)

/**
* @brief          Add/remove ((STD_ON)/(STD_OFF)) the service Adc_SetChannel() from the code.
*/
#define ADC_SETCHANNEL_API                        (STD_OFF)

/**
* @brief          Extra group notification mechanism is/is not ((STD_ON)/(STD_OFF)) available at runtime.
*/
#define ADC_ENABLE_INITIAL_NOTIFICATION           (STD_OFF)

/**
* @brief          Add/remove ((STD_ON)/(STD_OFF)) the service Adc_SelfTest() from the code.
*/
#define ADC_SELF_TEST                             (STD_OFF)

/**
* @brief           ADC Configure Threshold enabled/disabled (STD_ON/STD_OFF).
*/
#define ADC_ENABLE_CONFIGURE_THRESHOLD_NONAUTO_API  (STD_OFF)

/**
* @brief           Switch to enable/disable the API for the CPR_RTD_00056, CPR_RTD_00057, CPR_RTD_00058, CPR_RTD_00059 and CPR_RTD_00060.
*/
#define ADC_CTU_CONTROL_MODE_EXTRA_APIS           (STD_OFF)

/**
* @brief           This switch is used to enable the hardware trigger Autosar Extension API for the CPR_RTD_00037, CPR_RTD_00038, CPR_RTD_00039, CPR_RTD_00040, CPR_RTD_00041.
*/
#define ADC_ENABLE_CTUTRIG_NONAUTO_API            (STD_OFF)

/**
* @brief           Switch to enable/disable the API for the CPR-MCAL-726, CPR-MCAL-727, CPR-MCAL-728.
*/
#define ADC_ENABLE_CTU_CONTROL_MODE_API           (STD_OFF)

/**
* @brief           Switch to enable/disable the API for Tempsense.
*/
#define ADC_ENABLE_TEMPSENSE_API                  (STD_OFF)
#define ADC_POWER_ON_TEMPSENSE                    (STD_OFF)

/**
* @brief           Enable the read of raw data API (CPR_RTD_00508).
*/
#define ADC_ENABLE_READ_RAW_DATA_API              (STD_OFF)

/**
* @brief           Enable Group Streaming Result as multiple set.
*/
#define ADC_ENABLE_GROUP_STREAMING_RESULTS_REORDER (STD_OFF)

/**
* @brief IRQ definition
*/

#define ADC_UNIT_1_ISR_USED

/**
* @brief           max queue depth configured across all configset.
*/
#define ADC_QUEUE_MAX_DEPTH_MAX             (1U)

/**
* @brief           max number of groups configured across all configset.
*/
#define ADC_MAX_GROUPS                      (2U)

/**
* @brief           Invalid Hardware group ID to determine there is no ongoing hardware group
*/
#define ADC_INVALID_HW_GROUP_ID             (0xFFFFU)

#ifdef ADC_DMA_SUPPORTED
/**
* @brief           Maximum number of channels across all hardware units.
*/
#define ADC_MAX_CHANNEL_PER_HW_UNIT         (8U)
#endif /* ADC_DMA_SUPPORTED */

/**
* @brief           Software injected conversion use
*/
#define ADC_SOFTWARE_INJECTED_CONVERSIONS_USED    (STD_OFF)

/**
* @brief          Configuration Precompile variant.
* @details        Configuration Precompile variant.
*/
#define ADC_PRECOMPILE_SUPPORT                    (STD_OFF)

/**
* @brief          Development error detection enabled/disabled ((STD_ON)/(STD_OFF)).
*/
#define ADC_DEV_ERROR_DETECT                      (STD_ON)

/**
* @brief          Add/remove ((STD_ON)/(STD_OFF)) the service Adc_GetVersionInfo() from the code.
*/
#define ADC_VERSION_INFO_API                      (STD_ON)

/**
* @brief          Add/remove ((STD_ON)/(STD_OFF)) the service Adc_DeInit() from the code.
*/
#define ADC_DEINIT_API                            (STD_ON)

/**
* @brief          Add/remove ((STD_ON)/(STD_OFF)) the services Adc_StartGroupConversion()and Adc_StopGroupConversion() from the code.
*/
#define ADC_ENABLE_START_STOP_GROUP_API           (STD_ON)

/**
* @brief          Add/Remove the services Adc_ReadGroup() from the code.
*/
#define ADC_READ_GROUP_API                        (STD_ON)

/**
* @brief          Add/Remove One time setting of Conversion time registers from Init() function.
*/
#define ADC_SET_ADC_CONV_TIME_ONCE                (STD_OFF)

/**
* @brief   Switch to enable that power state mode is supported
*
*/
#define ADC_POWER_STATE_SUPPORTED                 (STD_OFF)

#if (ADC_POWER_STATE_SUPPORTED == STD_ON)
/**
* @brief   Enable/Disable the asynchronous power mode
*
*/
#define ADC_POWER_STATE_ASYNCH_MODE_SUPPORTED     (STD_OFF)
#endif /* (ADC_POWER_STATE_SUPPORTED == STD_ON) */

/**
* @brief           This switch is used to enable the queue.
*/
#define ADC_ENABLE_QUEUING                        (STD_ON)

/**
* @brief           This switch is used to enable the Autosar Extension ADC performance optimization feature.
*/
#define ADC_BYPASS_ABORT_CHAIN_CHECK              (STD_OFF)

/**
* @brief           Symbolic names of ADC Hardware units.
* @details         Values generated are the ADC Logical Unit ID selected from configurator.
*                  These defines are recommended to be used with any ADC driver API that takes as input parameter Adc Unit.
*/
#define AdcHwUnit_1                               (0U)

/**
* @brief          Adc channel id.
*/
#define ADC_ID_CHANNEL_U8(Id)                     (Id)

/**
* @brief          macros to simplify access to structures.
* @details        Streaming number of samples
*/
#define ADC_STREAMING_NUM_SAMPLES(num)            (num)

/**
* @brief          Adc group priority.
*/
#define ADC_GROUP_PRIORITY(Priority)              (Priority)

/**
* @brief           AUTOSAR Symbolic names of channels on all HW units with encoded value.
* @details         Bit fields [12-15]:  HW unit physical id
*                  Bit fields [0-11]:   Logical id of channel in HW unit (used in Adc_EnableChannel()/Adc_DisableChannel())
*/
#define Adc1_VREFH                       (0x1000U)
#define Adc1_BANDGAP                       (0x1001U)
#define Adc1_VREFL                       (0x1002U)
#define PTB12_ADC1_SE7_MCU_TP1                       (0x1003U)
#define PTD4_ADC1_SE6_MCU_TP2                       (0x1004U)
#define PTC7_ADC1_SE5_MCU_TP3                       (0x1005U)
#define PTC6_ADC1_SE4_MCU_TP4                       (0x1006U)
#define PTE6_ADC1_SE11_MCU_SYS_TP                       (0x1007U)

/**
* @brief          Definitions used for extracting the ADC Logical Unit Id and logical id of channels in each unit from equivalent channel symbolic name
*/
#if (ADC_ENABLE_CH_DISABLE_CH_NONAUTO_API == STD_ON)
#define ADC_CHANNEL_SYMBOLIC_NAME_MASK_CHANNEL_ID_U16           (0xFFFU)
#define ADC_CHANNEL_SYMBOLIC_NAME_SHIFT_HW_UNIT_ID_U16          (12U)
#endif /* (ADC_ENABLE_CH_DISABLE_CH_NONAUTO_API == STD_ON) */

/**
* @brief           Autosar Extension symbolic names of channels per groups, on all HW units, with value set to channel index in the group.
*/
#define AdcGroupSoftwareOneShot_Adc1_VREFH                   (0U)
#define AdcGroupSoftwareOneShot_Adc1_BANDGAP                   (1U)
#define AdcGroupSoftwareOneShot_Adc1_VREFL                   (2U)
#define AdcGroupSoftwareOneShot_PTB12_ADC1_SE7_MCU_TP1                   (3U)
#define AdcGroupSoftwareOneShot_PTD4_ADC1_SE6_MCU_TP2                   (4U)
#define AdcGroupSoftwareOneShot_PTC7_ADC1_SE5_MCU_TP3                   (5U)
#define AdcGroupSoftwareOneShot_PTC6_ADC1_SE4_MCU_TP4                   (6U)
#define AdcGroupSoftwareOneShot_PTE6_ADC1_SE11_MCU_SYS_TP                   (7U)
#define AdcGroupHardwareOneShot_Adc1_VREFH                   (0U)
#define AdcGroupHardwareOneShot_Adc1_BANDGAP                   (1U)
#define AdcGroupHardwareOneShot_Adc1_VREFL                   (2U)
#define AdcGroupHardwareOneShot_PTB12_ADC1_SE7_MCU_TP1                   (3U)
#define AdcGroupHardwareOneShot_PTD4_ADC1_SE6_MCU_TP2                   (4U)
#define AdcGroupHardwareOneShot_PTC7_ADC1_SE5_MCU_TP3                   (5U)
#define AdcGroupHardwareOneShot_PTC6_ADC1_SE4_MCU_TP4                   (6U)
#define AdcGroupHardwareOneShot_PTE6_ADC1_SE11_MCU_SYS_TP                   (7U)

/**
* @brief           Symbolic names of groups.
*/

#define AdcGroupSoftwareOneShot                                (0U)
#define AdcGroupHardwareOneShot                                (1U)

/**
* @brief           Symbolic names of groups - ecuc 2108 compliant.
*/

#define AdcConf_AdcGroup_AdcGroupSoftwareOneShot               (0U)
#define AdcConf_AdcGroup_AdcGroupHardwareOneShot               (1U)

/**
* @brief          ADC Global Validation.
*/
#define ADC_VALIDATE_GLOBAL_CALL         (ADC_DEV_ERROR_DETECT)
#define ADC_VALIDATE_CALL_AND_GROUP      (ADC_DEV_ERROR_DETECT)
#define ADC_VALIDATE_CALL_AND_UNIT       (ADC_DEV_ERROR_DETECT)
#define ADC_VALIDATE_PARAMS              (ADC_DEV_ERROR_DETECT)
#define ADC_VALIDATE_NOTIFY_CAPABILITY   (ADC_DEV_ERROR_DETECT)

/*==================================================================================================
*                                             ENUMS
==================================================================================================*/


/*==================================================================================================
*                                STRUCTURES AND OTHER TYPEDEFS
==================================================================================================*/


/*==================================================================================================
*                                GLOBAL VARIABLE DECLARATIONS
==================================================================================================*/


/*==================================================================================================
*                                    FUNCTION PROTOTYPES
==================================================================================================*/

#ifdef __cplusplus
}
#endif

/** @} */

#endif /* ADC_CFGDEFINES_H */