/*================================================================================================== * Project : RTD AUTOSAR 4.4 * Platform : CORTEXM * Peripheral : * Dependencies : none * * Autosar Version : 4.4.0 * Autosar Revision : ASR_REL_4_4_REV_0000 * Autosar Conf.Variant : * SW Version : 1.0.0 * Build Version : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907 * * (c) Copyright 2020-2021 NXP Semiconductors * All Rights Reserved. * * NXP Confidential. This software is owned or controlled by NXP and may only be * used strictly in accordance with the applicable license terms. By expressly * accepting such terms or by downloading, installing, activating and/or otherwise * using the software, you are agreeing that you have read, and that you agree to * comply with and are bound by, such license terms. If you do not agree to be * bound by the applicable license terms, then you may not retain, install, * activate or otherwise use the software. ==================================================================================================*/ /** * @file Mcu_Cfg.h * @implements Mcu_Cfg.h_Artifact * @version 1.0.0 * * @brief AUTOSAR Mcu - Configuration file for the driver. * @details Precompile parameters and extern configuration. * * @addtogroup MCU * @{ */ #ifndef MCU_CFG_H #define MCU_CFG_H #ifdef __cplusplus extern "C"{ #endif /*================================================================================================== INCLUDE FILES 1) system and project includes 2) needed interfaces from external units 3) internal and external interfaces from this unit ==================================================================================================*/ #include "Mcal.h" #include "Clock_Ip_Cfg.h" #include "Power_Ip_Cfg.h" #include "Ram_Ip_Cfg.h" #include "Mcu_VS_0_PBcfg.h" /*================================================================================================== SOURCE FILE VERSION INFORMATION ==================================================================================================*/ #define MCU_CFG_VENDOR_ID 43 #define MCU_CFG_AR_RELEASE_MAJOR_VERSION 4 #define MCU_CFG_AR_RELEASE_MINOR_VERSION 4 #define MCU_CFG_AR_RELEASE_REVISION_VERSION 0 #define MCU_CFG_SW_MAJOR_VERSION 1 #define MCU_CFG_SW_MINOR_VERSION 0 #define MCU_CFG_SW_PATCH_VERSION 0 /*================================================================================================== * FILE VERSION CHECKS ==================================================================================================*/ #ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK /* Check if header file and Mcal header file are of the same Autosar version */ #if ((MCU_CFG_AR_RELEASE_MAJOR_VERSION != MCAL_AR_RELEASE_MAJOR_VERSION) || \ (MCU_CFG_AR_RELEASE_MINOR_VERSION != MCAL_AR_RELEASE_MINOR_VERSION)) #error "AutoSar Version Numbers of Mcu_Cfg.h and Mcal.h are different" #endif #endif /* Check if header file and Clock_Ip_Cfg.h file are of the same vendor */ #if (MCU_CFG_VENDOR_ID != CLOCK_IP_CFG_VENDOR_ID) #error "Mcu_Cfg.h and Clock_Ip_Cfg.h have different vendor ids" #endif /* Check if header file and Clock_Ip_Cfg.h file are of the same Autosar version */ #if ((MCU_CFG_AR_RELEASE_MAJOR_VERSION != CLOCK_IP_CFG_AR_RELEASE_MAJOR_VERSION) || \ (MCU_CFG_AR_RELEASE_MINOR_VERSION != CLOCK_IP_CFG_AR_RELEASE_MINOR_VERSION) || \ (MCU_CFG_AR_RELEASE_REVISION_VERSION != CLOCK_IP_CFG_AR_RELEASE_REVISION_VERSION) \ ) #error "AutoSar Version Numbers of Mcu_Cfg.h and Clock_Ip_Cfg.h are different" #endif /* Check if header file and Clock_Ip_Cfg.h file are of the same Software version */ #if ((MCU_CFG_SW_MAJOR_VERSION != CLOCK_IP_CFG_SW_MAJOR_VERSION) || \ (MCU_CFG_SW_MINOR_VERSION != CLOCK_IP_CFG_SW_MINOR_VERSION) || \ (MCU_CFG_SW_PATCH_VERSION != CLOCK_IP_CFG_SW_PATCH_VERSION) \ ) #error "Software Version Numbers of Mcu_Cfg.h and Clock_Ip_Cfg.h are different" #endif /* Check if header file and Power_Ip_Cfg.h file are of the same vendor */ #if (MCU_CFG_VENDOR_ID != POWER_IP_CFG_VENDOR_ID) #error "Mcu_Cfg.h and Power_Ip_Cfg.h have different vendor ids" #endif /* Check if header file and Power_Ip_Cfg.h file are of the same Autosar version */ #if ((MCU_CFG_AR_RELEASE_MAJOR_VERSION != POWER_IP_CFG_AR_RELEASE_MAJOR_VERSION) || \ (MCU_CFG_AR_RELEASE_MINOR_VERSION != POWER_IP_CFG_AR_RELEASE_MINOR_VERSION) || \ (MCU_CFG_AR_RELEASE_REVISION_VERSION != POWER_IP_CFG_AR_RELEASE_REVISION_VERSION) \ ) #error "AutoSar Version Numbers of Mcu_Cfg.h and Power_Ip_Cfg.h are different" #endif /* Check if header file and Power_Ip_Cfg.h file are of the same Software version */ #if ((MCU_CFG_SW_MAJOR_VERSION != POWER_IP_CFG_SW_MAJOR_VERSION) || \ (MCU_CFG_SW_MINOR_VERSION != POWER_IP_CFG_SW_MINOR_VERSION) || \ (MCU_CFG_SW_PATCH_VERSION != POWER_IP_CFG_SW_PATCH_VERSION) \ ) #error "Software Version Numbers of Mcu_Cfg.h and Power_Ip_Cfg.h are different" #endif /* Check if header file and Ram_Ip_Cfg.h file are of the same vendor */ #if (MCU_CFG_VENDOR_ID != RAM_IP_CFG_VENDOR_ID) #error "Mcu_Cfg.h and Ram_Ip_Cfg.h have different vendor ids" #endif /* Check if header file and Ram_Ip_Cfg.h file are of the same Autosar version */ #if ((MCU_CFG_AR_RELEASE_MAJOR_VERSION != RAM_IP_CFG_AR_RELEASE_MAJOR_VERSION) || \ (MCU_CFG_AR_RELEASE_MINOR_VERSION != RAM_IP_CFG_AR_RELEASE_MINOR_VERSION) || \ (MCU_CFG_AR_RELEASE_REVISION_VERSION != RAM_IP_CFG_AR_RELEASE_REVISION_VERSION) \ ) #error "AutoSar Version Numbers of Mcu_Cfg.h and Ram_Ip_Cfg.h are different" #endif /* Check if header file and Ram_Ip_Cfg.h file are of the same Software version */ #if ((MCU_CFG_SW_MAJOR_VERSION != RAM_IP_CFG_SW_MAJOR_VERSION) || \ (MCU_CFG_SW_MINOR_VERSION != RAM_IP_CFG_SW_MINOR_VERSION) || \ (MCU_CFG_SW_PATCH_VERSION != RAM_IP_CFG_SW_PATCH_VERSION) \ ) #error "Software Version Numbers of Mcu_Cfg.h and Ram_Ip_Cfg.h are different" #endif /* Check if header file and Mcu_VS_0_PBcfg.h file are of the same vendor */ #if (MCU_CFG_VENDOR_ID != MCU_VS_0_PBCFG_VENDOR_ID) #error "Mcu_Cfg.h and Mcu_VS_0_PBcfg.h have different vendor ids" #endif /* Check if header file and Mcu_VS_0_PBcfg.h file are of the same Autosar version */ #if ((MCU_CFG_AR_RELEASE_MAJOR_VERSION != MCU_VS_0_PBCFG_AR_RELEASE_MAJOR_VERSION) || \ (MCU_CFG_AR_RELEASE_MINOR_VERSION != MCU_VS_0_PBCFG_AR_RELEASE_MINOR_VERSION) || \ (MCU_CFG_AR_RELEASE_REVISION_VERSION != MCU_VS_0_PBCFG_AR_RELEASE_REVISION_VERSION) \ ) #error "AutoSar Version Numbers of Mcu_Cfg.h and Mcu_VS_0_PBcfg.h are different" #endif /* Check if header file and Mcu_VS_0_PBcfg.h file are of the same Software version */ #if ((MCU_CFG_SW_MAJOR_VERSION != MCU_VS_0_PBCFG_SW_MAJOR_VERSION) || \ (MCU_CFG_SW_MINOR_VERSION != MCU_VS_0_PBCFG_SW_MINOR_VERSION) || \ (MCU_CFG_SW_PATCH_VERSION != MCU_VS_0_PBCFG_SW_PATCH_VERSION) \ ) #error "Software Version Numbers of Mcu_Cfg.h and Mcu_VS_0_PBcfg.h are different" #endif /*================================================================================================== DEFINES AND MACROS ==================================================================================================*/ /** * @brief Specifies the InstanceId of this module instance. */ #define MCU_INSTANCE_ID ((uint8)0x0U) /** @{ * @brief Service Ids for MCU APIs. */ #define MCU_INIT_ID ((uint8)0x00U) #define MCU_INITRAMSECTION_ID ((uint8)0x01U) #define MCU_INITCLOCK_ID ((uint8)0x02U) #define MCU_DISTRIBUTEPLLCLOCK_ID ((uint8)0x03U) #define MCU_GETPLLSTATUS_ID ((uint8)0x04U) #define MCU_GETRESETREASON_ID ((uint8)0x05U) #define MCU_GETRESETRAWVALUE_ID ((uint8)0x06U) #define MCU_PERFORMRESET_ID ((uint8)0x07U) #define MCU_SETMODE_ID ((uint8)0x08U) #define MCU_GETVERSIONINFO_ID ((uint8)0x09U) #define MCU_GETRAMSTATE_ID ((uint8)0x0AU) /**@}*/ /** @{ * @brief Service Ids for NonASR MCU APIs. */ #define MCU_GETPOWERDOMAIN_ID ((uint8)0x0BU) #define MCU_GETPERIPHERALSTATE_ID ((uint8)0x0CU) #define MCU_GETSYSTEMSTATE_ID ((uint8)0x0DU) #define MCU_GETPOWERMODESTATE_ID ((uint8)0x0EU) #define MCU_GETMEMCONFIG_ID ((uint8)0x13U) #define MCU_GETMIDRSTRUCTURE_ID ((uint8)0x14U) #define MCU_SSCMGETSTATUS_ID ((uint8)0x15U) #define MCU_SSCMGETUOPT_ID ((uint8)0x16U) #define MCU_DISABLECMU_ID ((uint8)0x17U) #define MCU_EMIOSCONFIGUREGPREN_ID ((uint8)0x18U) #define MCU_GETCLOCKFREQUENCY_ID ((uint8)0x19U) #define MCU_SLEEPONEXIT_ID ((uint8)0x1AU) #define MCU_SRAMRETENCONFIG_ID ((uint8)0x1BU) /**@}*/ /** * @brief Pre-processor switch for enabling the default error detection and reporting to the DET. * The detection of default errors is configurable (ON / OFF) at pre-compile time. */ #define MCU_DEV_ERROR_DETECT (STD_OFF) /** * @brief If this parameter is set to TRUE, the Power Management Controller (PMC) initialization has to be disabled from the MCU driver. */ #define MCU_DISABLE_PMC_INIT (STD_OFF) /** * @brief If this parameter is set to TRUE, the Reset Control Module (RMC) initialization has to be disabled from the MCU driver. */ #define MCU_DISABLE_RCM_INIT (STD_OFF) /** * @brief If this parameter is set to TRUE, the System Mode Controller (SMC) initialization has to be disabled from the MCU driver. */ #define MCU_DISABLE_SMC_INIT (STD_OFF) /** * @brief Pre-processor switch to enable/disable the API to read out the modules version information. */ #define MCU_VERSION_INFO_API (STD_OFF) /** * @brief Pre-processor switch to enable/disable the API Mcu_GetRamState. */ #define MCU_GET_RAM_STATE_API (STD_OFF) /** * @brief If this parameter is set to FALSE, the clock initialization has to be disabled from the MCU driver. */ #define MCU_INIT_CLOCK (STD_ON) /** * @brief This parameter shall be set True, if the H/W does not have a PLL or the PLL circuitry is enabled after the power on without S/W intervention. */ #define MCU_NO_PLL (STD_ON) /** * @brief define for interrupt CMU, PMC, SCG peripheral */ #define MCU_CMU_PMC_SCG_INTERRUPT (STD_OFF) #if (MCU_PERFORM_RESET_API == STD_ON) /** * @brief The user callout reset is/isn't available (STD_ON/STD_OFF) - called by MCU right before Mcu_PerformReset(). */ #define MCU_RESET_CALLOUT_USED (STD_OFF) #endif /** * @brief ISR Mcu_CmuClockFail_ISR is/isn't available */ #define MCU_CMU_ERROR_ISR_USED (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_GetPeripheral_State() for getting infos about peripheral state from MC_ME module. */ #define MCU_GET_PERIPH_STATE_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_GetPowerMode_State() for getting infos system platform configuration. */ #define MCU_POWERMODE_STATE_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_GetPowerDomain_Status. Get PMU state: operable or not. */ #define MCU_GET_POWER_DOMAIN_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_GetSystem_State() for getting system platform configuration information. Get (SSCM_STATUS | SSCM_MEMCONFIG). */ #define MCU_GET_SYSTEM_STATE_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_SscmGetMemConfig(). Get SSCM_MEMCONFIG. */ #define MCU_GET_MEM_CONFIG_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_SscmGetStatus(). Get SSCM_STATUS. */ #define MCU_SSCM_GET_STATUS_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_SscmGetUopt(). Get SSCM_UOPT. */ #define MCU_SSCM_GET_UOPT_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_GetMidrStructure(). Returns . */ #define MCU_GET_MIDR_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_EmiosConfigureGpren(). */ #define MCU_EMIOS_CONFIGURE_GPREN_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_Disable_CMU(). */ #define MCU_DISABLE_CMU_API (STD_OFF) /** * @brief Enable the usage of Non-Autosar API Mcu_GetClockFrequency(). */ #define MCU_GET_CLOCK_FREQUENCY_API (STD_OFF) /** * @brief Enable/Disable the API for reporting the Dem Error. */ #define MCU_DISABLE_DEM_REPORT_ERROR_STATUS (STD_ON) /** * @brief Enable the usage of Non-Autosar API Mcu_SRAMRetentionConfig(). */ #define MCU_SRAM_RETEN_CONFIG_API (STD_OFF) /** * @brief Enable/Disable the Ram Notification. */ #define MCU_DISABLE_RAM_CONFIG (STD_ON) /** * @brief Enable/Disable the Flash Notification. */ #define MCU_DISABLE_FLASH_CONFIG (STD_ON) /** * @brief ISR Mcu_VoltageError_ISR is/isn't available (STD_ON/STD_OFF) */ #if (MCU_CMU_PMC_SCG_INTERRUPT == STD_ON) #define MCU_VOLTAGE_ERROR_ISR_USED (STD_OFF) #endif /** * @brief Maximum number of MCU Clock configurations. */ #define MCU_MAX_CLKCONFIGS ((uint32)1U) /** * @brief Maximum number of MCU Mode configurations. */ #define MCU_MAX_MODECONFIGS ((uint32)1U) /** * @brief Maximum number of MCU Ram configurations. */ #define MCU_MAX_RAMCONFIGS ((uint32)0U) #define MCU_MAX_NORAMCONFIGS /** * @brief Pre-compile Support. */ #define MCU_PRECOMPILE_SUPPORT (STD_ON) #ifdef MCU_GET_MIDR_API #if (MCU_GET_MIDR_API == STD_ON) /** * @brief Number of total available SIUL2 (SIUL2 + SIUL2_AE) units. */ #define MCU_SIUL2_TOTAL_UNITS ((uint8)0U) #endif #endif /** * @brief Number of Clock Muxes per CGM module */ /** * @brief Index of CGMs module */ #ifdef MCU_ERROR_ISR_NOTIFICATION /* This is used to clear CMU flags from the RGM interrupt */ #define MCU_CMU_CLEAR_CLOCK_IRQ_FLAG (MCU_CMU_ERROR_ISR_USED) #endif #if !(defined (CLOCK_IP_S32K1)) /** * @brief Support for User mode. * If this parameter has been configured to 'TRUE' the Mcu driver can be executed from both supervisor and user mode. */ #define MCU_ENABLE_USER_MODE_SUPPORT (STD_OFF) /** Check the driver user mode is enabled only when the MCAL_ENABLE_USER_MODE_SUPPORT is enabled */ #ifndef MCAL_ENABLE_USER_MODE_SUPPORT #if (MCU_ENABLE_USER_MODE_SUPPORT == STD_ON) #error MCAL_ENABLE_USER_MODE_SUPPORT is not enabled. For running Mcu in user mode the MCAL_ENABLE_USER_MODE_SUPPORT needs to be defined. #endif /* (MCU_ENABLE_USER_MODE_SUPPORT == STD_ON) */ #endif /* ifndef MCAL_ENABLE_USER_MODE_SUPPORT */ #endif /* CLOCK_IP_S32K1 */ /** * @brief The function Mcu_GetResetRawValue shall return an implementation specific value which does * not correspond to a valid value of the reset status register and is not equal to 0 if this * function is called prior to calling of the function Mcu_Init, and if supported by the * hardware. * */ #define MCU_RAW_RESET_DEFAULT ((uint32)0xFFFFFFFFUL) /** @brief This is the corresponding bit of Stop Acknowledge Error reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_SACKERR ((uint32)0x00002000U) /** @brief This is the corresponding bit of MDM-AP System Reset Request in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_MDM_AP ((uint32)0x00000800U) /** @brief This is the corresponding bit of Software reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_SW ((uint32)0x00000400U) /** @brief This is the corresponding bit of Stop Core Lockup reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_LOCKUP ((uint32)0x00000200U) /** @brief This is the corresponding bit of JTAG generated reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_JTAG ((uint32)0x00000100U) /** @brief This is the corresponding bit of Power-on reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_POR ((uint32)0x00000080U) /** @brief This is the corresponding bit of external pin reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_PIN ((uint32)0x00000040U) /** @brief This is the corresponding bit of watchdog reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_WDOG ((uint32)0x00000020U) /** @brief This is the corresponding bit of CMU Loss-of-Lock reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_CMU_LOC ((uint32)0x00000010U) /** @brief This is the corresponding bit of Loss-of-Lock reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_LOL ((uint32)0x00000008U) /** @brief This is the corresponding bit of Loss-of-Clock reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_LOC ((uint32)0x00000004U) /** @brief This is the corresponding bit of Low-Voltage Detect reset or High-Voltage Detect reset in the returned value of Mcu_GetResetRawReason */ #define MCU_RAW_RESET_LVD ((uint32)0x00000002U) /** * @brief This define controls the availability of function Mcu_SleepOnExit */ #define MCU_SLEEPONEXIT_SUPPORT (STD_ON) /*================================================================================================== DEFINES AND MACROS ==================================================================================================*/ #if (MCU_DEV_ERROR_DETECT == STD_ON) /** @{ * @brief Default error values are of type uint8. * The following errors and exceptions shall be detectable by the MCU module depending on its * build version (Default/production mode). * */ #define MCU_E_PARAM_CONFIG ((uint8)0x0AU) #if (MCU_INIT_CLOCK == STD_ON) #define MCU_E_PARAM_CLOCK ((uint8)0x0BU) #endif #define MCU_E_PARAM_MODE ((uint8)0x0CU) #ifndef MCU_MAX_NORAMCONFIGS #define MCU_E_PARAM_RAMSECTION ((uint8)0x0DU) #endif #if (MCU_INIT_CLOCK == STD_ON) && (MCU_NO_PLL == STD_OFF) #define MCU_E_PLL_NOT_LOCKED ((uint8)0x0EU) #endif #define MCU_E_UNINIT ((uint8)0x0FU) #if (MCU_VERSION_INFO_API == STD_ON) || (MCU_GET_MIDR_API == STD_ON) #define MCU_E_PARAM_POINTER ((uint8)0x10U) #endif #define MCU_E_INIT_FAILED ((uint8)0x11U) #define MCU_E_ALREADY_INITIALIZED ((uint8)0x13U) #if (MCU_DISABLE_CMU_API == STD_ON) #define MCU_E_CMU_INDEX_OUT_OF_RANGE ((uint8)0x22U) #endif /**@}*/ #endif /* (MCU_DEV_ERROR_DETECT == STD_ON) */ #ifdef MCU_ERROR_ISR_NOTIFICATION /** @{ * @brief Error ISR values are of type uint8. * The following error codes are reported by the error ISR. */ #if (MCU_CMU_ERROR_ISR_USED == STD_ON) #define MCU_E_ISR_CLOCK_FAILURE ((uint8)0x01U) #endif #endif /* MCU_ERROR_ISR_NOTIFICATION */ /*================================================================================================== STRUCTURES AND OTHER TYPEDEFS ==================================================================================================*/ /** * @brief The Mcu_ModeType specifies the identification (ID) for a MCU mode, configured via configuration structure. * @details The type shall be uint8, uint16 or uint32. * * @implements Mcu_ModeType_typedef * */ typedef uint32 Mcu_ModeType; /** * @brief The Mcu_RamSectionType specifies the identification (ID) for a RAM section, configured via the configuration structure. * The type shall be uint8, uint16 or uint32, based on best performance. * @implements Mcu_RamSectionType_typedef */ typedef uint32 Mcu_RamSectionType; /** * @brief The Mcu_RamWriteSizeType specifies the RAM section write size. * The type shall be uint8, uint16 or uint32, based on best performance. * */ typedef uint32 Mcu_RamWriteSizeType; #if (MCU_INIT_CLOCK == STD_ON) /** * @brief Defines the identification (ID) for clock setting configured via the configuration structure. * @details The type shall be uint8, uint16 or uint32, depending on uC platform. * * @implements Mcu_ClockType_typedef */ typedef uint32 Mcu_ClockType; #endif /* (MCU_INIT_CLOCK == STD_ON) */ /** * @brief The type Mcu_RawResetType specifies the reset reason in raw register format, read from a reset status register. * @details The type shall be uint8, uint16 or uint32 based on best performance. * * @implements Mcu_RawResetType_typedef * */ typedef uint32 Mcu_RawResetType; /**< @brief Destructive and Functional Reset Events Log. */ /** * @brief DEM error reporting configuration. * @details This structure contains information DEM error reporting */ typedef struct { Mcal_DemErrorType Mcu_E_TimeoutFailureCfg; Mcal_DemErrorType Mcu_E_InvalidFxoscConfigCfg; Mcal_DemErrorType Mcu_E_ClockMuxSwitchFailureCfg; Mcal_DemErrorType Mcu_E_ClockFailureCfg; Mcal_DemErrorType Mcu_E_SwitchModeFailureCfg; } Mcu_DemConfigType; #if (MCU_POWERMODE_STATE_API == STD_ON) /** * @brief State of the current power mode. * @details Used to store the value of register value. */ typedef uint32 Mcu_PowerModeStateType; #endif /* (MCU_POWERMODE_STATE_API == STD_ON) */ /*================================================================================================== CONSTANTS ==================================================================================================*/ #if (MCU_INIT_CLOCK == STD_ON) /** * @brief Create defines with the IDs assigned to Mcu Clock configurations. * These IDs will be transmitted as input parameters for Mcu_InitClock() API. */ #define McuClockSettingConfig_0 ((Mcu_ClockType)0U) #define McuConf_McuClockSettingConfig_McuClockSettingConfig_0 ((Mcu_ClockType)0U) #endif /** * @brief Create defines with the IDs assigned to Mcu Mode configurations. * These IDs will be transmitted as input parameters for Mcu_SetMode() API. */ #define McuModeSettingConf_0 ((Mcu_ModeType)0U) #define McuConf_McuModeSettingConf_McuModeSettingConf_0 ((Mcu_ModeType)0U) /** * @brief Create defines with the IDs assigned to Mcu RAM Section configurations. * These IDs will be transmitted as input parameters for Mcu_InitRamSection() API. */ /*================================================================================================== ENUMS ==================================================================================================*/ /** * @brief Type of the return value of the function Mcu_GetPllStatus. * @details The type of Mcu_PllStatusType is an enumeration with the following values: * MCU_PLL_LOCKED, MCU_PLL_UNLOCKED, MCU_PLL_STATUS_UNDEFINED. * * @implements Mcu_PllStatusType_Enumeration * */ typedef enum { MCU_PLL_LOCKED = 0x33U, /**< @brief PLL is locked. */ MCU_PLL_UNLOCKED = 0xCCU, /**< @brief PLL is unlocked. */ MCU_PLL_STATUS_UNDEFINED = 0x5AU /**< @brief PLL Status is unknown. */ } Mcu_PllStatusType; /** * @brief The type Mcu_ResetType, represents the different reset that a specified MCU can have. * @details The MCU module shall provide at least the values MCU_POWER_ON_RESET and MCU_RESET_UNDEFINED for the enumeration Mcu_ResetType. * * @implements Mcu_ResetType_Enumeration */ typedef Power_Ip_ResetType Mcu_ResetType; #if (MCU_GET_RAM_STATE_API == STD_ON) /** * @brief Ram State of the microcontroller. * @details This is the Ram State data type returned by the function Mcu_GetRamState() of the Mcu module. * @implements Mcu_RamStateType_Enumeration */ typedef enum { MCU_RAMSTATE_INVALID = 0x99U, /**< @brief RAM content is not valid or unknown (default). */ MCU_RAMSTATE_VALID = 0x66U /**< @brief RAM content is valid. */ } Mcu_RamStateType; #endif /* (MCU_GET_RAM_STATE_API == STD_ON) */ #ifdef MCU_PREPARE_MEMORY_CONFIG /** * @brief The stage of the flash and ram controllers configuration. * @details This is used to specify the entry and exit point of the flash and ram controllers configuration. */ typedef enum { MCU_RAM_MEMORY_CONFIG_ENTRY_POINT = 0x77U, MCU_RAM_MEMORY_CONFIG_EXIT_POINT = 0x88U } Mcu_MemoryConfigStageType; #endif #if (defined(MCU_PMC_NOTIFICATION) && (MCU_ENTER_LOW_POWER_MODE == STD_ON)) /** * @brief Power management controller events. * @details The various events triggered by the power management controller. */ typedef enum { MCU_LAST_MILE_REGULATOR_DISABLED = 0x55U } Mcu_PowerManagementEventType; #endif #ifdef MCU_SLEEPONEXIT_SUPPORT #if (MCU_SLEEPONEXIT_SUPPORT == STD_ON) typedef enum { MCU_SLEEP_ON_EXIT_DISABLED = 0U, /**< @brief Disable SLEEPONEXIT bit (default). */ MCU_SLEEP_ON_EXIT_ENABLED /**< @brief Enable SLEEPONEXIT bit. */ } Mcu_SleepOnExitType; #endif #endif #if (MCU_SRAM_RETEN_CONFIG_API ==STD_ON) /** * @brief Type of parameter value of the function Mcu_SRAMRetentionConfig. * @details The type of Mcu_SRAMRetenConfigType is an enumeration with the following values: * MCU_SRAML_RETEN, MCU_SRAMU_RETEN, MCU_SRAMLU_RETEN, MCU_NO_SRAMLU_RETEN. */ typedef Power_Ip_SRAMRetenConfigType Mcu_SRAMRetenConfigType; #endif /*================================================================================================== DEFINES AND MACROS ==================================================================================================*/ /** * @brief This macro is used to define the position of the first reset reason. * */ #define MCU_FIRST_RESET_REASON_POS_U32 ((uint32)MCU_POWER_ON_RESET) /*================================================================================================== GLOBAL VARIABLE DECLARATIONS ==================================================================================================*/ #if (MCU_DISABLE_DEM_REPORT_ERROR_STATUS == STD_OFF) #define MCU_START_SEC_VAR_CLEARED_UNSPECIFIED #include "Mcu_MemMap.h" /** * @brief Local copy of the pointer to the configuration data */ extern const Mcu_DemConfigType * Mcu_pDemCfgPtr; #define MCU_STOP_SEC_VAR_CLEARED_UNSPECIFIED #include "Mcu_MemMap.h" #define MCU_START_SEC_CONFIG_DATA_UNSPECIFIED #include "Mcu_MemMap.h" extern const Mcu_DemConfigType Mcu_Dem_Config; #define MCU_STOP_SEC_CONFIG_DATA_UNSPECIFIED #include "Mcu_MemMap.h" #endif /* (MCU_DISABLE_DEM_REPORT_ERROR_STATUS == STD_OFF) */ /*================================================================================================== * FUNCTION PROTOTYPES ==================================================================================================*/ #define MCU_START_SEC_CODE #include "Mcu_MemMap.h" #define MCU_STOP_SEC_CODE #include "Mcu_MemMap.h" #ifdef __cplusplus } #endif #endif /* #ifndef MCU_CFG_H */ /** @} */