BLE/generate/include/IntCtrl_Ip_CfgDefines.h

/*==================================================================================================
*   Project              : RTD AUTOSAR 4.4
*   Platform             : CORTEXM
*   Peripheral           : 
*   Dependencies         : none
*
*   Autosar Version      : 4.4.0
*   Autosar Revision     : ASR_REL_4_4_REV_0000
*   Autosar Conf.Variant :
*   SW Version           : 1.0.0
*   Build Version        : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907
*
*   (c) Copyright 2020-2021 NXP Semiconductors
*   All Rights Reserved.
*
*   NXP Confidential. This software is owned or controlled by NXP and may only be
*   used strictly in accordance with the applicable license terms. By expressly
*   accepting such terms or by downloading, installing, activating and/or otherwise
*   using the software, you are agreeing that you have read, and that you agree to
*   comply with and are bound by, such license terms. If you do not agree to be
*   bound by the applicable license terms, then you may not retain, install,
*   activate or otherwise use the software.
==================================================================================================*/

#ifndef INTCTRL_IP_CFG_DEFINES_H_
#define INTCTRL_IP_CFG_DEFINES_H_

/*==================================================================================================
                                         INCLUDE FILES
==================================================================================================*/
#include "StandardTypes.h"

/*==================================================================================================
*                              SOURCE FILE VERSION INFORMATION
==================================================================================================*/
#define PLATFORM_INTCTRL_IP_CFG_DEFINES_VENDOR_ID                          43
#define PLATFORM_INTCTRL_IP_CFG_DEFINES_SW_MAJOR_VERSION                   1
#define PLATFORM_INTCTRL_IP_CFG_DEFINES_SW_MINOR_VERSION                   0
#define PLATFORM_INTCTRL_IP_CFG_DEFINES_SW_PATCH_VERSION                   0


        #include "S32K144.h"
        


/*==================================================================================================
*                                       LOCAL MACROS
==================================================================================================*/
/* Development error detection */
#define INT_CTRL_IP_DEV_ERROR_DETECT              (STD_OFF)

/* CPU to CPU interrupt (MSI) routing through MSCM */
#define INT_CTRL_IP_MSI_AVAILABLE                 (STD_OFF)

/* MSI target core count */
#define INTCTRL_IP_MSI_CORE_CNT                   (0U)

/* MSI vector min */
#define INTCTRL_IP_DIRECTED_CPU_INT_MIN           (0)

/* MSI vector max */
#define INTCTRL_IP_DIRECTED_CPU_INT_MAX           (0)
/* Core count */
#define INTCTRL_IP_CORE_MASK                      (1U)

/* System interrupt routing through MSCM */
#define INT_CTRL_IP_MSCM_SYSTEM_INTERRUPT_ROUTER  (STD_ON)

/* INCT CTRL IP standalone APIs */
#define INT_CTRL_IP_STANDALONE_APIS               (STD_OFF)
    /* First implemented interrupt vector */
    #define INT_CTRL_IP_IRQ_MIN                       (DMA0_IRQn)
    
    /* Last implemented interrupt vector */
    #define INT_CTRL_IP_IRQ_MAX                       (FTM3_Ovf_Reload_IRQn)  
    /* The interrupt counter value*/
    #define INT_CTRL_IP_IRQ_COUNT                     (89U)
    /* Arm Cortex M4 */
    #define INT_CTRL_IP_CORTEXM4                      (STD_ON)
    #define INT_CTRL_IP_CORTEXR      STD_OFF


 
/* Number of priority bits implemented */
#define INT_CTRL_IP_NVIC_PRIO_BITS                (4U)

/*Interrupt Router Shared Peripheral Routing Control Register*/
#define INT_CTRL_IP_ROUTING_CONTROL_REGISTER      (STD_OFF)

/* This instruction invalidates the entire instruction cache or caches */
#define INT_CTRL_IP_INVALIDATE_CACHE              (STD_OFF)


/**
* @brief Support for User mode.
*        If this parameter has been configured to 'STD_ON', the Int Ctrl PLATFORM driver code can be executed from both supervisor and user mode.
*/

#define INTCTRL_PLATFORM_ENABLE_USER_MODE_SUPPORT   (STD_OFF)


#endif /* INTCTRL_IP_CFG_DEFINES_H_ */