BLE/generate/include/FlexCAN_Ip_Cfg.h

/*==================================================================================================
*   Project              : RTD AUTOSAR 4.4
*   Platform             : CORTEXM
*   Peripheral           : FLEXCAN
*   Dependencies         : 
*
*   Autosar Version      : 4.4.0
*   Autosar Revision     : ASR_REL_4_4_REV_0000
*   Autosar Conf.Variant :
*   SW Version           : 1.0.0
*   Build Version        : S32K1_RTD_1_0_0_HF01_D2109_ASR_REL_4_4_REV_0000_20210907
*
*   (c) Copyright 2020-2021 NXP Semiconductors
*   All Rights Reserved.
*
*   NXP Confidential. This software is owned or controlled by NXP and may only be
*   used strictly in accordance with the applicable license terms. By expressly
*   accepting such terms or by downloading, installing, activating and/or otherwise
*   using the software, you are agreeing that you have read, and that you agree to
*   comply with and are bound by, such license terms. If you do not agree to be
*   bound by the applicable license terms, then you may not retain, install,
*   activate or otherwise use the software.
==================================================================================================*/

#ifndef FLEXCAN_FLEXCAN_IP_CFG_H_
#define FLEXCAN_FLEXCAN_IP_CFG_H_

/**
*   @file FlexCAN_Ip_Cfg.h
*
*   @addtogroup FlexCAN
*   @{
*/

#ifdef __cplusplus
extern "C"{
#endif

/*==================================================================================================
*                                        INCLUDE FILES
* 1) system and project includes
* 2) needed interfaces from external units
* 3) internal and external interfaces from this unit
==================================================================================================*/
#include "FlexCAN_Ip_VS_0_PBcfg.h"

#include "OsIf.h"
#include "Reg_eSys.h"
/*==================================================================================================
*                              SOURCE FILE VERSION INFORMATION
==================================================================================================*/
#define FLEXCAN_IP_CFG_VENDOR_ID_H                      43
#define FLEXCAN_IP_CFG_AR_RELEASE_MAJOR_VERSION_H       4
#define FLEXCAN_IP_CFG_AR_RELEASE_MINOR_VERSION_H       4
#define FLEXCAN_IP_CFG_AR_RELEASE_REVISION_VERSION_H    0
#define FLEXCAN_IP_CFG_SW_MAJOR_VERSION_H               1
#define FLEXCAN_IP_CFG_SW_MINOR_VERSION_H               0
#define FLEXCAN_IP_CFG_SW_PATCH_VERSION_H               0
/*==================================================================================================
*                                     FILE VERSION CHECKS
==================================================================================================*/


/* Check if current file and FlexCAN_Ip_VS_0_PBcfg.h header file are of the same vendor */
#if (FLEXCAN_IP_CFG_VENDOR_ID_H != FLEXCAN_IP_VENDOR_ID_VS_0_PBCFG_H)
#error "FlexCAN_Ip_Cfg.h and FlexCAN_Ip_VS_0_PBcfg.h have different vendor ids"
#endif
/* Check if current file and FlexCAN_Ip_VS_0_PBcfg.h header file are of the same Autosar version */
#if ((FLEXCAN_IP_CFG_AR_RELEASE_MAJOR_VERSION_H   != FLEXCAN_IP_AR_RELEASE_MAJOR_VERSION_VS_0_PBCFG_H) || \
(FLEXCAN_IP_CFG_AR_RELEASE_MINOR_VERSION_H    != FLEXCAN_IP_AR_RELEASE_MINOR_VERSION_VS_0_PBCFG_H) || \
(FLEXCAN_IP_CFG_AR_RELEASE_REVISION_VERSION_H != FLEXCAN_IP_AR_RELEASE_REVISION_VERSION_VS_0_PBCFG_H) \
)
#error "AutoSar Version Numbers of FlexCAN_Ip_Cfg.h and FlexCAN_Ip_VS_0_PBcfg.h are different"
#endif
/* Check if current file and FlexCAN_Ip_VS_0_PBcfg.h header file are of the same Software version */
#if ((FLEXCAN_IP_CFG_SW_MAJOR_VERSION_H != FLEXCAN_IP_SW_MAJOR_VERSION_VS_0_PBCFG_H) || \
(FLEXCAN_IP_CFG_SW_MINOR_VERSION_H != FLEXCAN_IP_SW_MINOR_VERSION_VS_0_PBCFG_H) || \
(FLEXCAN_IP_CFG_SW_PATCH_VERSION_H != FLEXCAN_IP_SW_PATCH_VERSION_VS_0_PBCFG_H) \
)
#error "Software Version Numbers of FlexCAN_Ip_Cfg.h and FlexCAN_Ip_VS_0_PBcfg.h are different"
#endif



#ifndef DISABLE_MCAL_INTERMODULE_ASR_CHECK
/* Check if current file and OsIf header file are of the same version */
#if ((FLEXCAN_IP_CFG_AR_RELEASE_MAJOR_VERSION_H   != OSIF_AR_RELEASE_MAJOR_VERSION) || \
(FLEXCAN_IP_CFG_AR_RELEASE_MINOR_VERSION_H    != OSIF_AR_RELEASE_MINOR_VERSION) \
)
#error "AutoSar Version Numbers of FlexCAN_Ip_Cfg.h and OsIf.h are different"
#endif

/* Check if current file and Reg_eSys header file are of the same version */
#if ((FLEXCAN_IP_CFG_AR_RELEASE_MAJOR_VERSION_H   != REG_ESYS_AR_RELEASE_MAJOR_VERSION) || \
(FLEXCAN_IP_CFG_AR_RELEASE_MINOR_VERSION_H    != REG_ESYS_AR_RELEASE_MINOR_VERSION) \
)
#error "AutoSar Version Numbers of FlexCAN_Ip_Cfg.h and Reg_eSys.h are different"
#endif
#endif
/*==================================================================================================
*                                          CONSTANTS
==================================================================================================*/

/*==================================================================================================
*                                      DEFINES AND MACROS
==================================================================================================*/
/* External Structures generated by FlexCAN_Ip_PBCfg */
#define FLEXCAN_IP_CONFIG_EXT \
    FLEXCAN_IP_VS_0_PB_CFG 

/* for HLD, no need to extern states */
#define FLEXCAN_IP_STATE_EXT

#define FLEXCAN_IP_PN_CONFIG_EXT \
    FLEXCAN_IP_PN_VS_0_PB_CFG 



/*! @brief Enables / Disables user mode support */
#define FLEXCAN_IP_ENABLE_USER_MODE_SUPPORT    (STD_OFF)

#ifndef MCAL_ENABLE_USER_MODE_SUPPORT
    #if (STD_ON == FLEXCAN_IP_ENABLE_USER_MODE_SUPPORT)
        #error MCAL_ENABLE_USER_MODE_SUPPORT is not enabled. For running FLEXCAN in user mode, MCAL_ENABLE_USER_MODE_SUPPORT needs to be defined.
    #endif /* (STD_ON == FLEXCAN_IP_ENABLE_USER_MODE_SUPPORT */
#endif /* ifndef MCAL_ENABLE_USER_MODE_SUPPORT */

#if ((STD_ON == FLEXCAN_IP_ENABLE_USER_MODE_SUPPORT) && defined(MCAL_FLEXCAN_REG_PROT_AVAILABLE))
    #if (STD_ON == MCAL_FLEXCAN_REG_PROT_AVAILABLE)
        #define FLEXCAN_IP_SET_USER_ACCESS_ALLOWED_AVAILABLE      (STD_ON)
    #else
        #define FLEXCAN_IP_SET_USER_ACCESS_ALLOWED_AVAILABLE      (STD_OFF)
    #endif
#else
    #define FLEXCAN_IP_SET_USER_ACCESS_ALLOWED_AVAILABLE      (STD_OFF)
#endif


#if (FLEXCAN_IP_SET_USER_ACCESS_ALLOWED_AVAILABLE == STD_ON)
    /*! @brief Use to check if the instances support UAA bit or not */
    #define FLEXCAN_IP_CTRL_REG_PROT_SUPPORT_U8    ((uint8)0U)
#endif


/* Time out value in uS */
#define FLEXCAN_IP_TIMEOUT_DURATION    (1000000U)

/* This this will set the timer source for osif that will be used for timeout */
#define FLEXCAN_IP_SERVICE_TIMEOUT_TYPE    (OSIF_COUNTER_DUMMY)


/* @brief Maximum number of Message Buffers supported for payload size 8 for any of the CAN instances */
#define FLEXCAN_IP_FEATURE_MAX_MB_NUM    (32U)


/* @brief Maximum number of Message Buffers supported for payload size 8 for CAN0 */
#define FLEXCAN_IP_FEATURE_INSTANCE_0_MAX_MB_NUM    (32U)

/* @brief Maximum number of Message Buffers supported for payload size 8 for CAN1 */
#define FLEXCAN_IP_FEATURE_INSTANCE_1_MAX_MB_NUM    (16U)

/* @brief Maximum number of Message Buffers supported for payload size 8 for CAN2 */
#define FLEXCAN_IP_FEATURE_INSTANCE_2_MAX_MB_NUM    (16U)


/* @brief Array of maximum number of Message Buffers supported for payload size 8 for all the CAN instances */
#define FLEXCAN_IP_FEATURE_MAX_MB_NUM_ARRAY { \
                        FLEXCAN_IP_FEATURE_INSTANCE_0_MAX_MB_NUM, \
                        FLEXCAN_IP_FEATURE_INSTANCE_1_MAX_MB_NUM, \
                        FLEXCAN_IP_FEATURE_INSTANCE_2_MAX_MB_NUM \
}

/* @brief Has DMA enable (bit field MCR[DMA]). */
#define FLEXCAN_IP_FEATURE_HAS_DMA_ENABLE    (STD_OFF)
/* @brief Has Supervisor Mode MCR[SUPV] */
#define FLEXCAN_IP_FEATURE_HAS_SUPV    (STD_ON)
/* @brief Has Flexible Data Rate */
#define FLEXCAN_IP_FEATURE_HAS_FD    (STD_ON)
/* @bried FlexCAN has Detection And Correction of Memory Errors */
#define FLEXCAN_IP_FEATURE_HAS_MEM_ERR_DET    (STD_OFF)
/* @brief Has FlexCAN Enhanced Rx FIFO mode */
#define FLEXCAN_IP_FEATURE_HAS_ENHANCED_RX_FIFO    (STD_OFF)
/* @brief Has FlexCAN expandable memory */
#define FLEXCAN_IP_FEATURE_HAS_EXPANDABLE_MEMORY    (STD_OFF)
/* @brief Has FlexCAN Timestamp enabled */
#define FLEXCAN_IP_FEATURE_HAS_TS_ENABLE    (STD_OFF)
/* @brief Has FlexCAN High Resolution Timer for Time stamp CAN Message */
#define FLEXCAN_IP_FEATURE_HAS_HR_TIMER    (STD_OFF)

/* @brief Has FlexCAN Enhanced Rx FIFO has interrupts available */
#define FLEXCAN_IP_FEATURE_HAS_ENHANCED_RX_FIFO_INTERRUPT    (STD_OFF)
#define FLEXCAN_IP_FEATURE_HAS_PE_CLKSRC_SELECT    (STD_ON)
#define FLEXCAN_IP_FEATURE_HAS_WAKE_UP_IRQ    (STD_OFF)
/* @brief Enable use of Enhanced CBT time segments and ENTDC */
#define FLEXCAN_IP_FEATURE_HAS_ENHANCE_CBT    (STD_OFF)
/* @brief Has FD Iso Option Mode  */
#define FLEXCAN_IP_FEATURE_SWITCHINGISOMODE    (STD_ON)
/* @brief Has Protocol exception Mode */
#define FLEXCAN_IP_FEATURE_PROTOCOLEXCEPTION    (STD_ON)
/* @brief Has Edge filter Feature */
#define FLEXCAN_IP_FEATURE_EDGEFILTER    (STD_ON)
/* @brief Define if global variables need to be placed in non-cache area or not */
#define FLEXCAN_IP_FEATURE_NO_CACHE_NEEDED    (STD_OFF)

/* @brief Has Pretending Network Feature */
#define FLEXCAN_IP_FEATURE_HAS_PRETENDED_NETWORKING    (STD_ON)

/**
*   @brief      Can Rx/Tx common interrupt support
*/
#define FLEXCAN_IP_MB_INTERRUPT_SUPPORT    (STD_OFF)


/**
*   @brief      Can Bus Off interrupt support
*/
#define FLEXCAN_IP_BUSOFF_INTERRUPT_SUPPORT    (STD_OFF)


/**
*   @brief      Can Error interrupt support
*/
#define FLEXCAN_IP_ERROR_INTERRUPT_SUPPORT    (STD_OFF)

/* Defines the No Of Message Buffers Partions Suppport MBDSR regions */
#define FLEXCAN_IP_FEATURE_MBDSR_COUNT    (1U)

/* Enable Development Error Detection */
#define FLEXCAN_IP_DEV_ERROR_DETECT    (STD_ON)


#ifdef __cplusplus
}
#endif /* __cplusplus */

/** @} */

#endif /* FLEXCAN_FLEXCAN_IP_CFG_H_ */