/*
 * FreeRTOS Kernel V10.4.6
 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates.  All Rights Reserved.
 *
 * SPDX-License-Identifier: MIT
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy of
 * this software and associated documentation files (the "Software"), to deal in
 * the Software without restriction, including without limitation the rights to
 * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of
 * the Software, and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in all
 * copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * https://www.FreeRTOS.org
 * https://github.com/FreeRTOS
 *
 */

/*-----------------------------------------------------------
 * Implementation of functions defined in portable.h for the SH2A port.
 *----------------------------------------------------------*/

/* Standard C includes. */
#include "limits.h"

/* Scheduler includes. */
#include "FreeRTOS.h"
#include "task.h"

/* Library includes. */
#include "string.h"

/* Hardware specifics. */
#if ( configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H == 1 )

    #include "platform.h"

#else /* configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H */

    #include "iodefine.h"

#endif /* configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H */
/*-----------------------------------------------------------*/

/* Tasks should start with interrupts enabled and in Supervisor mode, therefore
PSW is set with U and I set, and PM and IPL clear. */
#define portINITIAL_PSW	 ( ( StackType_t ) 0x00030000 )

/* The peripheral clock is divided by this value before being supplying the
CMT. */
#if ( configUSE_TICKLESS_IDLE == 0 )
	/* If tickless idle is not used then the divisor can be fixed. */
	#define portCLOCK_DIVISOR	8UL
#elif ( configPERIPHERAL_CLOCK_HZ >= 12000000 )
	#define portCLOCK_DIVISOR	512UL
#elif ( configPERIPHERAL_CLOCK_HZ >= 6000000 )
	#define portCLOCK_DIVISOR	128UL
#elif ( configPERIPHERAL_CLOCK_HZ >= 1000000 )
	#define portCLOCK_DIVISOR	32UL
#else
	#define portCLOCK_DIVISOR	8UL
#endif

/* These macros allow a critical section to be added around the call to
xTaskIncrementTick(), which is only ever called from interrupts at the kernel
priority - ie a known priority.  Therefore these local macros are a slight
optimisation compared to calling the global SET/CLEAR_INTERRUPT_MASK macros,
which would require the old IPL to be read first and stored in a local variable. */
#define portDISABLE_INTERRUPTS_FROM_KERNEL_ISR() 	__asm volatile ( "MVTIPL	%0" ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) )
#define portENABLE_INTERRUPTS_FROM_KERNEL_ISR() 	__asm volatile ( "MVTIPL	%0" ::"i"(configKERNEL_INTERRUPT_PRIORITY) )

/* Keys required to lock and unlock access to certain system registers
respectively. */
#define portUNLOCK_KEY		0xA50B
#define portLOCK_KEY		0xA500

/*-----------------------------------------------------------*/

/*
 * Function to start the first task executing - written in asm code as direct
 * access to registers is required.
 */
static void prvStartFirstTask( void ) __attribute__((naked));

/*
 * Software interrupt handler.  Performs the actual context switch (saving and
 * restoring of registers).  Written in asm code as direct register access is
 * required.
 */
#if ( configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H == 1 )

    R_BSP_PRAGMA_INTERRUPT( vSoftwareInterruptISR, VECT( ICU, SWINT ) )
    R_BSP_ATTRIB_INTERRUPT void vSoftwareInterruptISR( void ) __attribute__( ( naked ) );

#else /* configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H */

    void vSoftwareInterruptISR( void ) __attribute__( ( naked ) );

#endif /* configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H  */

/*
 * The tick ISR handler.  The peripheral used is configured by the application
 * via a hook/callback function.
 */
#if ( configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H == 1 )

    R_BSP_PRAGMA_INTERRUPT( vTickISR, _VECT( configTICK_VECTOR ) )
    R_BSP_ATTRIB_INTERRUPT void vTickISR( void ); /* Do not add __attribute__( ( interrupt ) ). */

#else /* configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H */

    void vTickISR( void ) __attribute__( ( interrupt ) );

#endif /* configINCLUDE_PLATFORM_H_INSTEAD_OF_IODEFINE_H */

/*
 * Sets up the periodic ISR used for the RTOS tick using the CMT.
 * The application writer can define configSETUP_TICK_INTERRUPT() (in
 * FreeRTOSConfig.h) such that their own tick interrupt configuration is used
 * in place of prvSetupTimerInterrupt().
 */
static void prvSetupTimerInterrupt( void );
#ifndef configSETUP_TICK_INTERRUPT
	/* The user has not provided their own tick interrupt configuration so use
	the definition in this file (which uses the interval timer). */
	#define configSETUP_TICK_INTERRUPT() prvSetupTimerInterrupt()
#endif /* configSETUP_TICK_INTERRUPT */

/*
 * Called after the sleep mode registers have been configured, prvSleep()
 * executes the pre and post sleep macros, and actually calls the wait
 * instruction.
 */
#if configUSE_TICKLESS_IDLE == 1
	static void prvSleep( TickType_t xExpectedIdleTime );
#endif /* configUSE_TICKLESS_IDLE */

/*-----------------------------------------------------------*/

/* Used in the context save and restore code. */
extern void *pxCurrentTCB;

/* Calculate how many clock increments make up a single tick period. */
static const uint32_t ulMatchValueForOneTick = ( ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) / configTICK_RATE_HZ );

#if configUSE_TICKLESS_IDLE == 1

	/* Holds the maximum number of ticks that can be suppressed - which is
	basically how far into the future an interrupt can be generated. Set
	during initialisation.  This is the maximum possible value that the
	compare match register can hold divided by ulMatchValueForOneTick. */
	static const TickType_t xMaximumPossibleSuppressedTicks = USHRT_MAX / ( ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) / configTICK_RATE_HZ );

	/* Flag set from the tick interrupt to allow the sleep processing to know if
	sleep mode was exited because of a tick interrupt, or an interrupt
	generated by something else. */
	static volatile uint32_t ulTickFlag = pdFALSE;

	/* The CMT counter is stopped temporarily each time it is re-programmed.
	The following constant offsets the CMT counter match value by the number of
	CMT	counts that would typically be missed while the counter was stopped to
	compensate for the lost time.  The large difference between the divided CMT
	clock and the CPU clock means it is likely ulStoppedTimerCompensation will
	equal zero - and be optimised away. */
	static const uint32_t ulStoppedTimerCompensation = 100UL / ( configCPU_CLOCK_HZ / ( configPERIPHERAL_CLOCK_HZ / portCLOCK_DIVISOR ) );

#endif

/*-----------------------------------------------------------*/

/*
 * See header file for description.
 */
StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters )
{
	/* Offset to end up on 8 byte boundary. */
	pxTopOfStack--;

	/* R0 is not included as it is the stack pointer. */
	*pxTopOfStack = 0x00;
	pxTopOfStack--;
	*pxTopOfStack = 0x00;
	pxTopOfStack--;
 	*pxTopOfStack = portINITIAL_PSW;
	pxTopOfStack--;
	*pxTopOfStack = ( StackType_t ) pxCode;

	/* When debugging it can be useful if every register is set to a known
	value.  Otherwise code space can be saved by just setting the registers
	that need to be set. */
	#ifdef USE_FULL_REGISTER_INITIALISATION
	{
		pxTopOfStack--;
		*pxTopOfStack = 0x12345678;	/* r15. */
		pxTopOfStack--;
		*pxTopOfStack = 0xaaaabbbb;
		pxTopOfStack--;
		*pxTopOfStack = 0xdddddddd;
		pxTopOfStack--;
		*pxTopOfStack = 0xcccccccc;
		pxTopOfStack--;
		*pxTopOfStack = 0xbbbbbbbb;
		pxTopOfStack--;
		*pxTopOfStack = 0xaaaaaaaa;
		pxTopOfStack--;
		*pxTopOfStack = 0x99999999;
		pxTopOfStack--;
		*pxTopOfStack = 0x88888888;
		pxTopOfStack--;
		*pxTopOfStack = 0x77777777;
		pxTopOfStack--;
		*pxTopOfStack = 0x66666666;
		pxTopOfStack--;
		*pxTopOfStack = 0x55555555;
		pxTopOfStack--;
		*pxTopOfStack = 0x44444444;
		pxTopOfStack--;
		*pxTopOfStack = 0x33333333;
		pxTopOfStack--;
		*pxTopOfStack = 0x22222222;
		pxTopOfStack--;
	}
	#else
	{
		/* Leave space for the registers that will get popped from the stack
		when the task first starts executing. */
		pxTopOfStack -= 15;
	}
	#endif

	*pxTopOfStack = ( StackType_t ) pvParameters; /* R1 */
	pxTopOfStack--;
	*pxTopOfStack = 0x12345678; /* Accumulator. */
	pxTopOfStack--;
	*pxTopOfStack = 0x87654321; /* Accumulator. */

	return pxTopOfStack;
}
/*-----------------------------------------------------------*/

BaseType_t xPortStartScheduler( void )
{
	/* Use pxCurrentTCB just so it does not get optimised away. */
	if( pxCurrentTCB != NULL )
	{
		/* Call an application function to set up the timer that will generate
		the tick interrupt.  This way the application can decide which
		peripheral to use.  If tickless mode is used then the default
		implementation defined in this file (which uses CMT0) should not be
		overridden. */
		configSETUP_TICK_INTERRUPT();

		/* Enable the software interrupt. */
		_IEN( _ICU_SWINT ) = 1;

		/* Ensure the software interrupt is clear. */
		_IR( _ICU_SWINT ) = 0;

		/* Ensure the software interrupt is set to the kernel priority. */
		_IPR( _ICU_SWINT ) = configKERNEL_INTERRUPT_PRIORITY;

		/* Start the first task. */
		prvStartFirstTask();
	}

	/* Execution should not reach here as the tasks are now running!
	prvSetupTimerInterrupt() is called here to prevent the compiler outputting
	a warning about a statically declared function not being referenced in the
	case that the application writer has provided their own tick interrupt
	configuration routine (and defined configSETUP_TICK_INTERRUPT() such that
	their own routine will be called in place of prvSetupTimerInterrupt()). */
	prvSetupTimerInterrupt();

	/* Should not get here. */
	return pdFAIL;
}
/*-----------------------------------------------------------*/

void vPortEndScheduler( void )
{
	/* Not implemented in ports where there is nothing to return to.
	Artificially force an assert. */
	configASSERT( pxCurrentTCB == NULL );
}
/*-----------------------------------------------------------*/

static void prvStartFirstTask( void )
{
	__asm volatile
	(
		/* When starting the scheduler there is nothing that needs moving to the
		interrupt stack because the function is not called from an interrupt.
		Just ensure the current stack is the user stack. */
		"SETPSW		U						\n" \

		/* Obtain the location of the stack associated with which ever task
		pxCurrentTCB is currently pointing to. */
		"MOV.L		#_pxCurrentTCB, R15		\n" \
		"MOV.L		[R15], R15				\n" \
		"MOV.L		[R15], R0				\n" \

		/* Restore the registers from the stack of the task pointed to by
		pxCurrentTCB. */
		"POP		R15						\n" \

		/* Accumulator low 32 bits. */
		"MVTACLO	R15 					\n" \
		"POP		R15						\n" \

		/* Accumulator high 32 bits. */
		"MVTACHI	R15 					\n" \

		/* R1 to R15 - R0 is not included as it is the SP. */
		"POPM		R1-R15 					\n" \

		/* This pops the remaining registers. */
		"RTE								\n" \
		"NOP								\n" \
		"NOP								\n"
	);
}
/*-----------------------------------------------------------*/

void vPortSoftwareInterruptISR( void )
{
	__asm volatile
	(
		/* Re-enable interrupts. */
		"SETPSW		I							\n" \

		/* Move the data that was automatically pushed onto the interrupt stack when
		the interrupt occurred from the interrupt stack to the user stack.

		R15 is saved before it is clobbered. */
		"PUSH.L		R15							\n" \

		/* Read the user stack pointer. */
		"MVFC		USP, R15					\n" \

		/* Move the address down to the data being moved. */
		"SUB		#12, R15					\n" \
		"MVTC		R15, USP					\n" \

		/* Copy the data across, R15, then PC, then PSW. */
		"MOV.L		[ R0 ], [ R15 ]				\n" \
		"MOV.L 		4[ R0 ], 4[ R15 ]			\n" \
		"MOV.L		8[ R0 ], 8[ R15 ]			\n" \

		/* Move the interrupt stack pointer to its new correct position. */
		"ADD		#12, R0						\n" \

		/* All the rest of the registers are saved directly to the user stack. */
		"SETPSW		U							\n" \

		/* Save the rest of the general registers (R15 has been saved already). */
		"PUSHM		R1-R14						\n" \

		/* Save the accumulator. */
		"MVFACHI 	R15							\n" \
		"PUSH.L		R15							\n" \

		/* Middle word. */
		"MVFACMI	R15							\n" \

		/* Shifted left as it is restored to the low order word. */
		"SHLL		#16, R15					\n" \
		"PUSH.L		R15							\n" \

		/* Save the stack pointer to the TCB. */
		"MOV.L		#_pxCurrentTCB, R15			\n" \
		"MOV.L		[ R15 ], R15				\n" \
		"MOV.L		R0, [ R15 ]					\n" \

		/* Ensure the interrupt mask is set to the syscall priority while the kernel
		structures are being accessed. */
		"MVTIPL		%0 							\n" \

		/* Select the next task to run. */
		"BSR.A		_vTaskSwitchContext			\n" \

		/* Reset the interrupt mask as no more data structure access is required. */
		"MVTIPL		%1							\n" \

		/* Load the stack pointer of the task that is now selected as the Running
		state task from its TCB. */
		"MOV.L		#_pxCurrentTCB,R15			\n" \
		"MOV.L		[ R15 ], R15				\n" \
		"MOV.L		[ R15 ], R0					\n" \

		/* Restore the context of the new task.  The PSW (Program Status Word) and
		PC will be popped by the RTE instruction. */
		"POP		R15							\n" \
		"MVTACLO 	R15							\n" \
		"POP		R15							\n" \
		"MVTACHI 	R15							\n" \
		"POPM		R1-R15						\n" \
		"RTE									\n" \
		"NOP									\n" \
		"NOP									  "
		:: "i"(configMAX_SYSCALL_INTERRUPT_PRIORITY), "i"(configKERNEL_INTERRUPT_PRIORITY)
	);
}
/*-----------------------------------------------------------*/

void vPortTickISR( void )
{
	/* Re-enabled interrupts. */
	__asm volatile( "SETPSW	I" );

	/* Increment the tick, and perform any processing the new tick value
	necessitates.  Ensure IPL is at the max syscall value first. */
	portDISABLE_INTERRUPTS_FROM_KERNEL_ISR();
	{
		if( xTaskIncrementTick() != pdFALSE )
		{
			taskYIELD();
		}
	}
	portENABLE_INTERRUPTS_FROM_KERNEL_ISR();

	#if configUSE_TICKLESS_IDLE == 1
	{
		/* The CPU woke because of a tick. */
		ulTickFlag = pdTRUE;

		/* If this is the first tick since exiting tickless mode then the CMT
		compare match value needs resetting. */
		CMT0.CMCOR = ( uint16_t ) ulMatchValueForOneTick;
	}
	#endif
}
/*-----------------------------------------------------------*/

uint32_t ulPortGetIPL( void )
{
	__asm volatile
	(
		"MVFC	PSW, R1			\n"	\
		"SHLR	#24, R1			\n"	\
		"RTS					  "
	);

	/* This will never get executed, but keeps the compiler from complaining. */
	return 0;
}
/*-----------------------------------------------------------*/

void vPortSetIPL( uint32_t ulNewIPL )
{
	__asm volatile
	(
		"PUSH	R5				\n" \
		"MVFC	PSW, R5			\n"	\
		"SHLL	#24, R1			\n" \
		"AND	#-0F000001H, R5 \n" \
		"OR		R1, R5			\n" \
		"MVTC	R5, PSW			\n" \
		"POP	R5				\n" \
		"RTS					  "
	 );
}
/*-----------------------------------------------------------*/

static void prvSetupTimerInterrupt( void )
{
	/* Unlock. */
	SYSTEM.PRCR.WORD = portUNLOCK_KEY;

	/* Enable CMT0. */
	MSTP( CMT0 ) = 0;

	/* Lock again. */
	SYSTEM.PRCR.WORD = portLOCK_KEY;

	/* Interrupt on compare match. */
	CMT0.CMCR.BIT.CMIE = 1;

	/* Set the compare match value. */
	CMT0.CMCOR = ( uint16_t ) ulMatchValueForOneTick;

	/* Divide the PCLK. */
	#if portCLOCK_DIVISOR == 512
	{
		CMT0.CMCR.BIT.CKS = 3;
	}
	#elif portCLOCK_DIVISOR == 128
	{
		CMT0.CMCR.BIT.CKS = 2;
	}
	#elif portCLOCK_DIVISOR == 32
	{
		CMT0.CMCR.BIT.CKS = 1;
	}
	#elif portCLOCK_DIVISOR == 8
	{
		CMT0.CMCR.BIT.CKS = 0;
	}
	#else
	{
		#error Invalid portCLOCK_DIVISOR setting
	}
	#endif

	/* Enable the interrupt... */
	_IEN( _CMT0_CMI0 ) = 1;

	/* ...and set its priority to the application defined kernel priority. */
	_IPR( _CMT0_CMI0 ) = configKERNEL_INTERRUPT_PRIORITY;

	/* Start the timer. */
	CMT.CMSTR0.BIT.STR0 = 1;
}
/*-----------------------------------------------------------*/

#if configUSE_TICKLESS_IDLE == 1

	static void prvSleep( TickType_t xExpectedIdleTime )
	{
		/* Allow the application to define some pre-sleep processing. */
		configPRE_SLEEP_PROCESSING( xExpectedIdleTime );

		/* xExpectedIdleTime being set to 0 by configPRE_SLEEP_PROCESSING()
		means the application defined code has already executed the WAIT
		instruction. */
		if( xExpectedIdleTime > 0 )
		{
			__asm volatile( "WAIT" );
		}

		/* Allow the application to define some post sleep processing. */
		configPOST_SLEEP_PROCESSING( xExpectedIdleTime );
	}

#endif /* configUSE_TICKLESS_IDLE */
/*-----------------------------------------------------------*/

#if configUSE_TICKLESS_IDLE == 1

	void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime )
	{
	uint32_t ulMatchValue, ulCompleteTickPeriods, ulCurrentCount;
	eSleepModeStatus eSleepAction;

		/* THIS FUNCTION IS CALLED WITH THE SCHEDULER SUSPENDED. */

		/* Make sure the CMT reload value does not overflow the counter. */
		if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks )
		{
			xExpectedIdleTime = xMaximumPossibleSuppressedTicks;
		}

		/* Calculate the reload value required to wait xExpectedIdleTime tick
		periods. */
		ulMatchValue = ulMatchValueForOneTick * xExpectedIdleTime;
		if( ulMatchValue > ulStoppedTimerCompensation )
		{
			/* Compensate for the fact that the CMT is going to be stopped
			momentarily. */
			ulMatchValue -= ulStoppedTimerCompensation;
		}

		/* Stop the CMT momentarily.  The time the CMT is stopped for is
		accounted for as best it can be, but using the tickless mode will
		inevitably result in some tiny drift of the time maintained by the
		kernel with respect to calendar time. */
		CMT.CMSTR0.BIT.STR0 = 0;
		while( CMT.CMSTR0.BIT.STR0 == 1 )
		{
			/* Nothing to do here. */
		}

		/* Critical section using the global interrupt bit as the i bit is
		automatically reset by the WAIT instruction. */
		__asm volatile( "CLRPSW i" );

		/* The tick flag is set to false before sleeping.  If it is true when
		sleep mode is exited then sleep mode was probably exited because the
		tick was suppressed for the entire xExpectedIdleTime period. */
		ulTickFlag = pdFALSE;

		/* If a context switch is pending then abandon the low power entry as
		the context switch might have been pended by an external interrupt that
		requires processing. */
		eSleepAction = eTaskConfirmSleepModeStatus();
		if( eSleepAction == eAbortSleep )
		{
			/* Restart tick. */
			CMT.CMSTR0.BIT.STR0 = 1;
			__asm volatile( "SETPSW i" );
		}
		else if( eSleepAction == eNoTasksWaitingTimeout )
		{
			/* Protection off. */
			SYSTEM.PRCR.WORD = portUNLOCK_KEY;

			/* Ready for software standby with all clocks stopped. */
			SYSTEM.SBYCR.BIT.SSBY = 1;

			/* Protection on. */
			SYSTEM.PRCR.WORD = portLOCK_KEY;

			/* Sleep until something happens.  Calling prvSleep() will
			automatically reset the i bit in the PSW. */
			prvSleep( xExpectedIdleTime );

			/* Restart the CMT. */
			CMT.CMSTR0.BIT.STR0 = 1;
		}
		else
		{
			/* Protection off. */
			SYSTEM.PRCR.WORD = portUNLOCK_KEY;

			/* Ready for deep sleep mode. */
			SYSTEM.MSTPCRC.BIT.DSLPE = 1;
			SYSTEM.MSTPCRA.BIT.MSTPA28 = 1;
			SYSTEM.SBYCR.BIT.SSBY = 0;

			/* Protection on. */
			SYSTEM.PRCR.WORD = portLOCK_KEY;

			/* Adjust the match value to take into account that the current
			time slice is already partially complete. */
			ulMatchValue -= ( uint32_t ) CMT0.CMCNT;
			CMT0.CMCOR = ( uint16_t ) ulMatchValue;

			/* Restart the CMT to count up to the new match value. */
			CMT0.CMCNT = 0;
			CMT.CMSTR0.BIT.STR0 = 1;

			/* Sleep until something happens.  Calling prvSleep() will
			automatically reset the i bit in the PSW. */
			prvSleep( xExpectedIdleTime );

			/* Stop CMT.  Again, the time the SysTick is stopped for is
			accounted for as best it can be, but using the tickless mode will
			inevitably result in some tiny drift of the time maintained by the
			kernel with	respect to calendar time. */
			CMT.CMSTR0.BIT.STR0 = 0;
			while( CMT.CMSTR0.BIT.STR0 == 1 )
			{
				/* Nothing to do here. */
			}

			ulCurrentCount = ( uint32_t ) CMT0.CMCNT;

			if( ulTickFlag != pdFALSE )
			{
				/* The tick interrupt has already executed, although because
				this function is called with the scheduler suspended the actual
				tick processing will not occur until after this function has
				exited.  Reset the match value with whatever remains of this
				tick period. */
				ulMatchValue = ulMatchValueForOneTick - ulCurrentCount;
				CMT0.CMCOR = ( uint16_t ) ulMatchValue;

				/* The tick interrupt handler will already have pended the tick
				processing in the kernel.  As the pending tick will be
				processed as soon as this function exits, the tick value
				maintained by the tick is stepped forward by one less than the
				time spent sleeping.  The actual stepping of the tick appears
				later in this function. */
				ulCompleteTickPeriods = xExpectedIdleTime - 1UL;
			}
			else
			{
				/* Something other than the tick interrupt ended the sleep.
				How	many complete tick periods passed while the processor was
				sleeping? */
				ulCompleteTickPeriods = ulCurrentCount / ulMatchValueForOneTick;

				/* The match value is set to whatever fraction of a single tick
				period remains. */
				ulMatchValue = ulCurrentCount - ( ulCompleteTickPeriods * ulMatchValueForOneTick );
				CMT0.CMCOR = ( uint16_t ) ulMatchValue;
			}

			/* Restart the CMT so it runs up to the match value.  The match value
			will get set to the value required to generate exactly one tick period
			the next time the CMT interrupt executes. */
			CMT0.CMCNT = 0;
			CMT.CMSTR0.BIT.STR0 = 1;

			/* Wind the tick forward by the number of tick periods that the CPU
			remained in a low power state. */
			vTaskStepTick( ulCompleteTickPeriods );
		}
	}

#endif /* configUSE_TICKLESS_IDLE */