/* * FreeRTOS Kernel V10.4.6 * Copyright (C) 2021 Amazon.com, Inc. or its affiliates. All Rights Reserved. * * SPDX-License-Identifier: MIT * * Permission is hereby granted, free of charge, to any person obtaining a copy of * this software and associated documentation files (the "Software"), to deal in * the Software without restriction, including without limitation the rights to * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of * the Software, and to permit persons to whom the Software is furnished to do so, * subject to the following conditions: * * The above copyright notice and this permission notice shall be included in all * copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. * * https://www.FreeRTOS.org * https://github.com/FreeRTOS * */ #ifndef PORTMACRO_H #define PORTMACRO_H #ifdef __cplusplus extern "C" { #endif /*----------------------------------------------------------- * Port specific definitions. * * The settings in this file configure FreeRTOS correctly for the * given hardware and compiler. * * These settings should not be altered. *----------------------------------------------------------- */ /* The compiler needs to be told functions that are only referenced by pointer * are to be included in the build. NOTE: Omitting these lines will result in a * run-time crash, not a linker error! */ #pragma funcall vTaskStartScheduler prvIdleTask #pragma funcall xTimerCreateTimerTask prvTimerTask /* Type definitions. */ #define portCHAR char #define portFLOAT float #define portDOUBLE double #define portLONG long #define portSHORT short #define portSTACK_TYPE uint32_t #define portBASE_TYPE long typedef portSTACK_TYPE StackType_t; typedef long BaseType_t; typedef unsigned long UBaseType_t; #if ( configUSE_16_BIT_TICKS == 1 ) typedef uint16_t TickType_t; #define portMAX_DELAY ( TickType_t ) 0xffff #else typedef uint32_t TickType_t; #define portMAX_DELAY ( TickType_t ) 0xffffffffUL /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do * not need to be guarded with a critical section. */ #define portTICK_TYPE_IS_ATOMIC 1 #endif /*-----------------------------------------------------------*/ /* Architecture specifics. */ #define portSTACK_GROWTH ( -1 ) #define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) #define portBYTE_ALIGNMENT 8 /*-----------------------------------------------------------*/ /* Scheduler utilities. */ #define portYIELD() \ { \ /* Set a PendSV to request a context switch. */ \ portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ \ /* Barriers are normally not required but do ensure the code is completely \ * within the specified behaviour for the architecture. */ \ __asm{ dsb }; \ __asm{ isb }; \ } #define portNVIC_INT_CTRL_REG ( *( ( volatile uint32_t * ) 0xe000ed04 ) ) #define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) #define portEND_SWITCHING_ISR( xSwitchRequired ) do { if( xSwitchRequired != pdFALSE ) portYIELD(); } while( 0 ) #define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) /*-----------------------------------------------------------*/ /* Critical section management. */ extern void vPortEnterCritical( void ); extern void vPortExitCritical( void ); #define portDISABLE_INTERRUPTS() CPU_REG_SET( CPU_BASEPRI, configMAX_SYSCALL_INTERRUPT_PRIORITY ); __asm{ dsb }; __asm{ isb } #define portENABLE_INTERRUPTS() CPU_REG_SET( CPU_BASEPRI, 0 ); #define portENTER_CRITICAL() vPortEnterCritical() #define portEXIT_CRITICAL() vPortExitCritical() #define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() #define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) CPU_REG_SET( CPU_BASEPRI, x ); /* Barrier instructions not used as this is only used to lower the basepri. */ /*-----------------------------------------------------------*/ /* Task function macros as described on the FreeRTOS.org WEB site. These are * not necessary for to use this port. They are defined so the common demo files * (which build with all the ports) will build. */ #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters ) #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters ) /*-----------------------------------------------------------*/ /* Tickless idle/low power functionality. */ #ifndef portSUPPRESS_TICKS_AND_SLEEP extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) #endif /*-----------------------------------------------------------*/ /* Architecture specific optimisations. */ #ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 #endif #if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 /* Generic helper function. */ __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) { uint8_t ucReturn; __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) ); return ucReturn; } /* Check the configuration. */ #if ( configMAX_PRIORITIES > 32 ) #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. #endif /* Store/clear the ready priorities in a bit map. */ #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) /*-----------------------------------------------------------*/ #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) #endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ /*-----------------------------------------------------------*/ #ifdef configASSERT void vPortValidateInterruptPriority( void ); #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() #endif /* portNOP() is not required by this port. */ #define portNOP() BaseType_t xPortIsInsideInterrupt( void ); /*-----------------------------------------------------------*/ static inline uint32_t ulPortRaiseBASEPRI( void ) { uint32_t ulOriginalBASEPRI; ulOriginalBASEPRI = CPU_REG_GET( CPU_BASEPRI ); CPU_REG_SET( CPU_BASEPRI, configMAX_SYSCALL_INTERRUPT_PRIORITY ); __asm{ dsb }; __asm{ isb }; return ulOriginalBASEPRI; } /*-----------------------------------------------------------*/ #ifdef __cplusplus } #endif #endif /* PORTMACRO_H */