/* $FreeBSD$ */ /*- * Copyright (c) 2008 Hans Petter Selasky. All rights reserved. * Copyright (c) 1998 The NetBSD Foundation, Inc. All rights reserved. * Copyright (c) 1998 Lennart Augustsson. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ /* * This file contains standard definitions for the following USB * protocol versions: * * USB v1.0 * USB v1.1 * USB v2.0 * USB v3.0 */ #ifndef _USB_STANDARD_H_ #define _USB_STANDARD_H_ #include typedef uint8_t uByte; typedef uint16_t uWord; typedef uint32_t uDWord; #define USB_STACK_VERSION 2000 /* 2.0 */ /* Definition of some hardcoded USB constants. */ #define USB_MAX_IPACKET 8 /* initial USB packet size */ #define USB_EP_MAX (2*16) /* hardcoded */ #define USB_ROOT_HUB_ADDR 1 /* index */ #define USB_MIN_DEVICES 2 /* unused + root HUB */ #define USB_UNCONFIG_INDEX 0xFF /* internal use only */ #define USB_IFACE_INDEX_ANY 0xFF /* internal use only */ #define USB_START_ADDR 0 /* default USB device BUS address * after USB bus reset */ #define USB_CONTROL_ENDPOINT 0 /* default control endpoint */ #define USB_FRAMES_PER_SECOND_FS 1000 /* full speed */ #define USB_FRAMES_PER_SECOND_HS 8000 /* high speed */ #define USB_FS_BYTES_PER_HS_UFRAME 188 /* bytes */ #define USB_HS_MICRO_FRAMES_MAX 8 /* units */ #define USB_ISOC_TIME_MAX 128 /* ms */ /* * Minimum time a device needs to be powered down to go through a * power cycle. These values are not in the USB specification. */ #define USB_POWER_DOWN_TIME 200 /* ms */ #define USB_PORT_POWER_DOWN_TIME 100 /* ms */ /* Definition of software USB power modes */ #define USB_POWER_MODE_OFF 0 /* turn off device */ #define USB_POWER_MODE_ON 1 /* always on */ #define USB_POWER_MODE_SAVE 2 /* automatic suspend and resume */ #define USB_POWER_MODE_SUSPEND 3 /* force suspend */ #define USB_POWER_MODE_RESUME 4 /* force resume */ /* These are the values from the USB specification. */ #define USB_PORT_RESET_DELAY_SPEC 10 /* ms */ #define USB_PORT_ROOT_RESET_DELAY_SPEC 50 /* ms */ #define USB_PORT_RESET_RECOVERY_SPEC 10 /* ms */ #define USB_PORT_POWERUP_DELAY_SPEC 100 /* ms */ #define USB_PORT_RESUME_DELAY_SPEC 20 /* ms */ #define USB_SET_ADDRESS_SETTLE_SPEC 2 /* ms */ #define USB_RESUME_DELAY_SPEC (20*5) /* ms */ #define USB_RESUME_WAIT_SPEC 10 /* ms */ #define USB_RESUME_RECOVERY_SPEC 10 /* ms */ #define USB_EXTRA_POWER_UP_TIME_SPEC 0 /* ms */ /* Allow for marginal and non-conforming devices. */ #define USB_PORT_RESET_DELAY 50 /* ms */ #define USB_PORT_ROOT_RESET_DELAY 200 /* ms */ #define USB_PORT_RESET_RECOVERY 250 /* ms */ #define USB_PORT_POWERUP_DELAY 300 /* ms */ #define USB_PORT_RESUME_DELAY (20*2) /* ms */ #define USB_SET_ADDRESS_SETTLE 10 /* ms */ #define USB_RESUME_DELAY (50*5) /* ms */ #define USB_RESUME_WAIT 50 /* ms */ #define USB_RESUME_RECOVERY 50 /* ms */ #define USB_EXTRA_POWER_UP_TIME 20 /* ms */ #define USB_MIN_POWER 100 /* mA */ #define USB_MAX_POWER 500 /* mA */ #define USB_BUS_RESET_DELAY 100 /* ms */ /* * USB record layout in memory: * * - USB config 0 * - USB interfaces * - USB alternative interfaces * - USB endpoints * * - USB config 1 * - USB interfaces * - USB alternative interfaces * - USB endpoints */ /* Declaration of USB records */ struct usb_device_request { uByte bmRequestType; uByte bRequest; uWord wValue; uWord wIndex; uWord wLength; } __attribute__((packed)); typedef struct usb_device_request usb_device_request_t; /* bmRequestType */ #define UT_GET_DIR(a) ((a) & 0x80) #define UT_DIR_OUT 0x00 /* host => device */ #define UT_DIR_IN 0x80 /* device => host */ #define UT_WRITE UT_DIR_OUT /* host write */ #define UT_READ UT_DIR_IN /* host read */ #define UT_MASK (0x3 << 5) #define UT_STANDARD 0x00 #define UT_CLASS 0x20 #define UT_VENDOR 0x40 #define UT_RESERVED 0x60 #define UT_RECIP_MASK 0x1f #define UT_RECIP_DEVICE 0x00 #define UT_RECIP_INTERFACE 0x01 #define UT_RECIP_ENDPOINT 0x02 #define UT_RECIP_OTHER 0x03 #define UT_RECIP_PORT 0x04 #define UT_RECIP_RPIPE 0x05 #define UT_READ_DEVICE (UT_READ | UT_STANDARD | UT_RECIP_DEVICE) #define UT_READ_INTERFACE (UT_READ | UT_STANDARD | UT_INTERFACE) #define UT_READ_ENDPOINT (UT_READ | UT_STANDARD | UT_ENDPOINT) #define UT_WRITE_DEVICE (UT_WRITE | UT_STANDARD | UT_RECIP_DEVICE) #define UT_WRITE_INTERFACE (UT_WRITE | UT_STANDARD | UT_INTERFACE) #define UT_WRITE_ENDPOINT (UT_WRITE | UT_STANDARD | UT_ENDPOINT) #define UT_READ_CLASS_DEVICE (UT_READ | UT_CLASS | UT_RECIP_DEVICE) #define UT_READ_CLASS_INTERFACE (UT_READ | UT_CLASS | UT_INTERFACE) #define UT_READ_CLASS_OTHER (UT_READ | UT_CLASS | UT_OTHER) #define UT_READ_CLASS_ENDPOINT (UT_READ | UT_CLASS | UT_ENDPOINT) #define UT_WRITE_CLASS_DEVICE (UT_WRITE | UT_CLASS | UT_RECIP_DEVICE) #define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE) #define UT_WRITE_CLASS_OTHER (UT_WRITE | UT_CLASS | UT_OTHER) #define UT_WRITE_CLASS_ENDPOINT (UT_WRITE | UT_CLASS | UT_ENDPOINT) #define UT_READ_VENDOR_DEVICE (UT_READ | UT_VENDOR | UT_RECIP_DEVICE) #define UT_READ_VENDOR_INTERFACE (UT_READ | UT_VENDOR | UT_INTERFACE) #define UT_READ_VENDOR_OTHER (UT_READ | UT_VENDOR | UT_OTHER) #define UT_READ_VENDOR_ENDPOINT (UT_READ | UT_VENDOR | UT_ENDPOINT) #define UT_WRITE_VENDOR_DEVICE (UT_WRITE | UT_VENDOR | UT_RECIP_DEVICE) #define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE) #define UT_WRITE_VENDOR_OTHER (UT_WRITE | UT_VENDOR | UT_OTHER) #define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT) /* Requests */ #define UR_GET_STATUS 0x00 #define UR_CLEAR_FEATURE 0x01 #define UR_SET_FEATURE 0x03 #define UR_SET_ADDRESS 0x05 #define UR_GET_DESCRIPTOR 0x06 #define UR_SET_DESCRIPTOR 0x07 #define UR_GET_CONFIG 0x08 #define UR_SET_CONFIG 0x09 #define UR_GET_INTERFACE 0x0a #define UR_SET_INTERFACE 0x0b #define UR_SYNCH_FRAME 0x0c #define UR_SET_SEL 0x30 #define UR_ISOCH_DELAY 0x31 /* Descriptor types ... USB 2.0 spec table 9.5 */ #define UDESC_DEVICE 0x01 #define UDESC_CONFIG 0x02 #define UDESC_STRING 0x03 #define USB_LANGUAGE_TABLE 0x00 /* language ID string index */ #define UDESC_INTERFACE 0x04 #define UDESC_ENDPOINT 0x05 #define UDESC_DEVICE_QUALIFIER 0x06 #define UDESC_OTHER_SPEED_CONFIGURATION 0x07 #define UDESC_INTERFACE_POWER 0x08 #define UDESC_OTG 0x09 #define UDESC_DEBUG 0x0A #define UDESC_IFACE_ASSOC 0x0B /* interface association */ #define UDESC_BOS 0x0F /* binary object store */ #define UDESC_DEVICE_CAPABILITY 0x10 #define UDESC_CS_DEVICE 0x21 /* class specific */ #define UDESC_CS_CONFIG 0x22 /* UDESC_CONFIG | UT_CLASS */ #define UDESC_CS_STRING 0x23 /* UDESC_STRING | UT_CLASS */ #define UDESC_CS_INTERFACE 0x24 /* UDESC_INTERFACE | UT_CLASS */ #define UDESC_CS_ENDPOINT 0x25 /* UDESC_ENDPOINT | UT_CLASS */ #define UDESC_HUB 0x29 #define UDESC_SS_HUB 0x2A /* super speed */ #define UDESC_ENDPOINT_SS_COMP 0x30 /* super speed */ /* HUB specific request */ #define UR_GET_BUS_STATE 0x02 #define UR_CLEAR_TT_BUFFER 0x08 #define UR_RESET_TT 0x09 #define UR_GET_TT_STATE 0x0a #define UR_STOP_TT 0x0b #define UR_SET_AND_TEST 0x0c /* USB 2.0 only */ #define UR_SET_HUB_DEPTH 0x0c /* USB 3.0 only */ #define USB_SS_HUB_DEPTH_MAX 5 #define UR_GET_PORT_ERR_COUNT 0x0d /* Feature numbers */ #define UF_ENDPOINT_HALT 0 #define UF_DEVICE_REMOTE_WAKEUP 1 #define UF_TEST_MODE 2 #define UF_U1_ENABLE 0x30 #define UF_U2_ENABLE 0x31 #define UF_LTM_ENABLE 0x32 /* HUB specific features */ #define UHF_C_HUB_LOCAL_POWER 0 #define UHF_C_HUB_OVER_CURRENT 1 #define UHF_PORT_CONNECTION 0 #define UHF_PORT_ENABLE 1 #define UHF_PORT_SUSPEND 2 #define UHF_PORT_OVER_CURRENT 3 #define UHF_PORT_RESET 4 #define UHF_PORT_LINK_STATE 5 #define UHF_PORT_POWER 8 #define UHF_PORT_LOW_SPEED 9 #define UHF_PORT_L1 10 #define UHF_C_PORT_CONNECTION 16 #define UHF_C_PORT_ENABLE 17 #define UHF_C_PORT_SUSPEND 18 #define UHF_C_PORT_OVER_CURRENT 19 #define UHF_C_PORT_RESET 20 #define UHF_PORT_TEST 21 #define UHF_PORT_INDICATOR 22 #define UHF_C_PORT_L1 23 /* SuperSpeed HUB specific features */ #define UHF_PORT_U1_TIMEOUT 23 #define UHF_PORT_U2_TIMEOUT 24 #define UHF_C_PORT_LINK_STATE 25 #define UHF_C_PORT_CONFIG_ERROR 26 #define UHF_PORT_REMOTE_WAKE_MASK 27 #define UHF_BH_PORT_RESET 28 #define UHF_C_BH_PORT_RESET 29 #define UHF_FORCE_LINKPM_ACCEPT 30 struct usb_descriptor { uByte bLength; uByte bDescriptorType; // uByte bDescriptorSubtype; } __attribute__((packed)); typedef struct usb_descriptor usb_descriptor_t; #define USB_DT_DEVICE_SIZE 18 struct usb_device_descriptor { uByte bLength; uByte bDescriptorType; uWord bcdUSB; #define UD_USB_2_0 0x0200 #define UD_USB_3_0 0x0300 #define UD_IS_USB2(d) ((d)->bcdUSB[1] == 0x02) #define UD_IS_USB3(d) ((d)->bcdUSB[1] == 0x03) uByte bDeviceClass; uByte bDeviceSubClass; uByte bDeviceProtocol; uByte bMaxPacketSize; /* The fields below are not part of the initial descriptor. */ uWord idVendor; uWord idProduct; uWord bcdDevice; uByte iManufacturer; uByte iProduct; uByte iSerialNumber; uByte bNumConfigurations; } __attribute__((packed)); typedef struct usb_device_descriptor usb_device_descriptor_t; /* Binary Device Object Store (BOS) */ struct usb_bos_descriptor { uByte bLength; uByte bDescriptorType; uWord wTotalLength; uByte bNumDeviceCaps; } __attribute__((packed)); typedef struct usb_bos_descriptor usb_bos_descriptor_t; /* Binary Device Object Store Capability */ struct usb_bos_cap_descriptor { uByte bLength; uByte bDescriptorType; uByte bDevCapabilityType; #define USB_DEVCAP_RESERVED 0x00 #define USB_DEVCAP_WUSB 0x01 #define USB_DEVCAP_USB2EXT 0x02 #define USB_DEVCAP_SUPER_SPEED 0x03 #define USB_DEVCAP_CONTAINER_ID 0x04 /* data ... */ } __attribute__((packed)); typedef struct usb_bos_cap_descriptor usb_bos_cap_descriptor_t; struct usb_devcap_usb2ext_descriptor { uByte bLength; uByte bDescriptorType; uByte bDevCapabilityType; uDWord bmAttributes; #define USB_V2EXT_LPM (1U << 1) #define USB_V2EXT_BESL_SUPPORTED (1U << 2) #define USB_V2EXT_BESL_BASELINE_VALID (1U << 3) #define USB_V2EXT_BESL_DEEP_VALID (1U << 4) #define USB_V2EXT_BESL_BASELINE_GET(x) (((x) >> 8) & 0xF) #define USB_V2EXT_BESL_DEEP_GET(x) (((x) >> 12) & 0xF) } __attribute__((packed)); typedef struct usb_devcap_usb2ext_descriptor usb_devcap_usb2ext_descriptor_t; struct usb_devcap_ss_descriptor { uByte bLength; uByte bDescriptorType; uByte bDevCapabilityType; uByte bmAttributes; uWord wSpeedsSupported; uByte bFunctionalitySupport; uByte bU1DevExitLat; uWord wU2DevExitLat; } __attribute__((packed)); typedef struct usb_devcap_ss_descriptor usb_devcap_ss_descriptor_t; struct usb_devcap_container_id_descriptor { uByte bLength; uByte bDescriptorType; uByte bDevCapabilityType; uByte bReserved; uByte bContainerID; } __attribute__((packed)); typedef struct usb_devcap_container_id_descriptor usb_devcap_container_id_descriptor_t; /* Device class codes */ #define UDCLASS_IN_INTERFACE 0x00 #define UDCLASS_AUDIO 0x01 #define UDCLASS_COMM 0x02 #define UDCLASS_HID 0x03 #define UDCLASS_MASS_STORAGE 0x08 #define UDCLASS_HUB 0x09 #define UDCLASS_CDC_DATA 0x0a #define UDCLASS_CCID 0x0b #define UDCLASS_MTP 0x06 #define UDCLASS_DIAGNOSTIC 0xdc #define UDCLASS_VIDEO 0xe0 #define UDCLASS_WIRELESS 0xe0 #define UDCLASS_MISC 0xef #define UDCLASS_APP_SPEC 0xfe #define UDCLASS_VENDOR 0xff /* Device subclass */ #define UDSUBCLASS_HUB 0x00 #define UDSUBCLASS_RF 0x01 #define UDSUBCLASS_MTP 0x01 /* Device protocol */ #define UDPROTO_FSHUB 0x00 #define UDPROTO_HSHUBSTT 0x01 #define UDPROTO_HSHUBMTT 0x02 #define UDPROTO_SSHUB 0x03 #define UDPROTO_BLUETOOTH 0x01 #define USB_DT_CONFIG_SIZE 9 struct usb_config_descriptor { uByte bLength; uByte bDescriptorType; uWord wTotalLength; uByte bNumInterface; uByte bConfigurationValue; #define USB_UNCONFIG_NO 0 uByte iConfiguration; uByte bmAttributes; #define UC_BUS_POWERED 0x80 #define UC_SELF_POWERED 0x40 #define UC_REMOTE_WAKEUP 0x20 uByte bMaxPower; /* max current in 2 mA units */ #define UC_POWER_FACTOR 2 } __attribute__((packed)); typedef struct usb_config_descriptor usb_config_descriptor_t; #define USB_DT_INTERFACE_SIZE 9 struct usb_interface_descriptor { uByte bLength; uByte bDescriptorType; uByte bInterfaceNumber; uByte bAlternateSetting; uByte bNumEndpoints; uByte bInterfaceClass; uByte bInterfaceSubClass; uByte bInterfaceProtocol; uByte iInterface; } __attribute__((packed)); typedef struct usb_interface_descriptor usb_interface_descriptor_t; struct usb_interface_assoc_descriptor { uByte bLength; uByte bDescriptorType; uByte bFirstInterface; uByte bInterfaceCount; uByte bFunctionClass; uByte bFunctionSubClass; uByte bFunctionProtocol; uByte iFunction; } __attribute__((packed)); typedef struct usb_interface_assoc_descriptor usb_interface_assoc_descriptor_t; /* Interface class codes */ #define UICLASS_UNSPEC 0x00 #define UICLASS_AUDIO 0x01 /* audio */ #define UISUBCLASS_AUDIOCONTROL 1 #define UISUBCLASS_AUDIOSTREAM 2 #define UISUBCLASS_MIDISTREAM 3 #define UICLASS_CDC 0x02 /* communication */ #define UISUBCLASS_DIRECT_LINE_CONTROL_MODEL 1 #define UISUBCLASS_ABSTRACT_CONTROL_MODEL 2 #define UISUBCLASS_TELEPHONE_CONTROL_MODEL 3 #define UISUBCLASS_MULTICHANNEL_CONTROL_MODEL 4 #define UISUBCLASS_CAPI_CONTROLMODEL 5 #define UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6 #define UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7 #define UISUBCLASS_WIRELESS_HANDSET_CM 8 #define UISUBCLASS_DEVICE_MGMT 9 #define UISUBCLASS_MOBILE_DIRECT_LINE_MODEL 10 #define UISUBCLASS_OBEX 11 #define UISUBCLASS_ETHERNET_EMULATION_MODEL 12 #define UISUBCLASS_NETWORK_CONTROL_MODEL 13 #define UIPROTO_CDC_NONE 0 #define UIPROTO_CDC_AT 1 #define UICLASS_HID 0x03 #define UISUBCLASS_BOOT 1 #define UIPROTO_BOOT_KEYBOARD 1 #define UIPROTO_MOUSE 2 #define UICLASS_PHYSICAL 0x05 #define UICLASS_IMAGE 0x06 #define UISUBCLASS_SIC 1 /* still image class */ #define UICLASS_PRINTER 0x07 #define UISUBCLASS_PRINTER 1 #define UIPROTO_PRINTER_UNI 1 #define UIPROTO_PRINTER_BI 2 #define UIPROTO_PRINTER_1284 3 #define UICLASS_MASS 0x08 #define UISUBCLASS_RBC 1 #define UISUBCLASS_SFF8020I 2 #define UISUBCLASS_QIC157 3 #define UISUBCLASS_UFI 4 #define UISUBCLASS_SFF8070I 5 #define UISUBCLASS_SCSI 6 #define UIPROTO_MASS_CBI_I 0 #define UIPROTO_MASS_CBI 1 #define UIPROTO_MASS_BBB_OLD 2 /* Not in the spec anymore */ #define UIPROTO_MASS_BBB 80 /* 'P' for the Iomega Zip drive */ #define UICLASS_HUB 0x09 #define UISUBCLASS_HUB 0 #define UIPROTO_FSHUB 0 #define UIPROTO_HSHUBSTT 0 /* Yes, same as previous */ #define UIPROTO_HSHUBMTT 1 #define UICLASS_CDC_DATA 0x0a #define UISUBCLASS_DATA 0x00 #define UIPROTO_DATA_ISDNBRI 0x30 /* Physical iface */ #define UIPROTO_DATA_HDLC 0x31 /* HDLC */ #define UIPROTO_DATA_TRANSPARENT 0x32 /* Transparent */ #define UIPROTO_DATA_Q921M 0x50 /* Management for Q921 */ #define UIPROTO_DATA_Q921 0x51 /* Data for Q921 */ #define UIPROTO_DATA_Q921TM 0x52 /* TEI multiplexer for Q921 */ #define UIPROTO_DATA_V42BIS 0x90 /* Data compression */ #define UIPROTO_DATA_Q931 0x91 /* Euro-ISDN */ #define UIPROTO_DATA_V120 0x92 /* V.24 rate adaption */ #define UIPROTO_DATA_CAPI 0x93 /* CAPI 2.0 commands */ #define UIPROTO_DATA_HOST_BASED 0xfd /* Host based driver */ #define UIPROTO_DATA_PUF 0xfe /* see Prot. Unit Func. Desc. */ #define UIPROTO_DATA_VENDOR 0xff /* Vendor specific */ #define UIPROTO_DATA_NCM 0x01 /* Network Control Model */ #define UICLASS_SMARTCARD 0x0b #define UICLASS_FIRM_UPD 0x0c #define UICLASS_SECURITY 0x0d #define UICLASS_DIAGNOSTIC 0xdc #define UICLASS_WIRELESS 0xe0 #define UISUBCLASS_RF 0x01 #define UIPROTO_BLUETOOTH 0x01 #define UIPROTO_RNDIS 0x03 #define UICLASS_IAD 0xEF /* Interface Association Descriptor */ #define UISUBCLASS_SYNC 0x01 #define UIPROTO_ACTIVESYNC 0x01 #define UICLASS_APPL_SPEC 0xfe #define UISUBCLASS_FIRMWARE_DOWNLOAD 1 #define UISUBCLASS_IRDA 2 #define UIPROTO_IRDA 0 #define UICLASS_VENDOR 0xff #define UISUBCLASS_XBOX360_CONTROLLER 0x5d #define UIPROTO_XBOX360_GAMEPAD 0x01 #define USB_DT_ENDPOINT_SIZE 7 struct usb_endpoint_descriptor { uByte bLength; uByte bDescriptorType; uByte bEndpointAddress; #define UE_GET_DIR(a) ((a) & 0x80) #define UE_SET_DIR(a,d) ((a) | (((d)&1) << 7)) #define UE_DIR_IN 0x80 /* IN-token endpoint, fixed */ #define UE_DIR_OUT 0x00 /* OUT-token endpoint, fixed */ #define UE_DIR_RX 0xfd /* for internal use only! */ #define UE_DIR_TX 0xfe /* for internal use only! */ #define UE_DIR_ANY 0xff /* for internal use only! */ #define UE_ADDR 0x0f #define UE_ADDR_ANY 0xff /* for internal use only! */ #define UE_GET_ADDR(a) ((a) & UE_ADDR) uByte bmAttributes; #define UE_XFERTYPE 0x03 #define UE_CONTROL 0x00 #define UE_ISOCHRONOUS 0x01 #define UE_BULK 0x02 #define UE_INTERRUPT 0x03 #define UE_BULK_INTR 0xfe /* for internal use only! */ #define UE_TYPE_ANY 0xff /* for internal use only! */ #define UE_GET_XFERTYPE(a) ((a) & UE_XFERTYPE) #define UE_ISO_TYPE 0x0c #define UE_ISO_ASYNC 0x04 #define UE_ISO_ADAPT 0x08 #define UE_ISO_SYNC 0x0c #define UE_GET_ISO_TYPE(a) ((a) & UE_ISO_TYPE) #define UE_ISO_USAGE 0x30 #define UE_ISO_USAGE_DATA 0x00 #define UE_ISO_USAGE_FEEDBACK 0x10 #define UE_ISO_USAGE_IMPLICT_FB 0x20 #define UE_GET_ISO_USAGE(a) ((a) & UE_ISO_USAGE) uWord wMaxPacketSize; #define UE_ZERO_MPS 0xFFFF /* for internal use only */ uByte bInterval; } __attribute__((packed)); typedef struct usb_endpoint_descriptor usb_endpoint_descriptor_t; struct usb_endpoint_ss_comp_descriptor { uByte bLength; uByte bDescriptorType; uByte bMaxBurst; uByte bmAttributes; #define UE_GET_BULK_STREAMS(x) ((x) & 0x0F) #define UE_GET_SS_ISO_MULT(x) ((x) & 0x03) uWord wBytesPerInterval; } __attribute__((packed)); typedef struct usb_endpoint_ss_comp_descriptor usb_endpoint_ss_comp_descriptor_t; struct usb_string_descriptor { uByte bLength; uByte bDescriptorType; uWord wData[1]; // uWord bString[126]; // uByte bUnused; } __attribute__((packed)); typedef struct usb_string_descriptor usb_string_descriptor_t; #define USB_MAKE_STRING_DESC(m,name) \ static const struct { \ uByte bLength; \ uByte bDescriptorType; \ uByte bData[sizeof((uint8_t []){m})]; \ } __attribute__((packed)) name = { \ .bLength = sizeof(name), \ .bDescriptorType = UDESC_STRING, \ .bData = { m }, \ } struct usb_string_lang { uByte bLength; uByte bDescriptorType; uByte bData[2]; } __attribute__((packed)); typedef struct usb_string_lang usb_string_lang_t; struct usb_hub_descriptor { uByte bDescLength; uByte bDescriptorType; uByte bNbrPorts; uWord wHubCharacteristics; #define UHD_PWR 0x0003 #define UHD_PWR_GANGED 0x0000 #define UHD_PWR_INDIVIDUAL 0x0001 #define UHD_PWR_NO_SWITCH 0x0002 #define UHD_COMPOUND 0x0004 #define UHD_OC 0x0018 #define UHD_OC_GLOBAL 0x0000 #define UHD_OC_INDIVIDUAL 0x0008 #define UHD_OC_NONE 0x0010 #define UHD_TT_THINK 0x0060 #define UHD_TT_THINK_8 0x0000 #define UHD_TT_THINK_16 0x0020 #define UHD_TT_THINK_24 0x0040 #define UHD_TT_THINK_32 0x0060 #define UHD_PORT_IND 0x0080 uByte bPwrOn2PwrGood; /* delay in 2 ms units */ #define UHD_PWRON_FACTOR 2 uByte bHubContrCurrent; uByte DeviceRemovable[32]; /* max 255 ports */ #define UHD_NOT_REMOV(desc, i) \ (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1) uByte PortPowerCtrlMask[1]; /* deprecated */ } __attribute__((packed)); typedef struct usb_hub_descriptor usb_hub_descriptor_t; struct usb_hub_ss_descriptor { uByte bLength; uByte bDescriptorType; uByte bNbrPorts; uWord wHubCharacteristics; uByte bPwrOn2PwrGood; /* delay in 2 ms units */ uByte bHubContrCurrent; uByte bHubHdrDecLat; uWord wHubDelay; uByte DeviceRemovable[32]; /* max 255 ports */ } __attribute__((packed)); typedef struct usb_hub_ss_descriptor usb_hub_ss_descriptor_t; /* minimum HUB descriptor (8-ports maximum) */ struct usb_hub_descriptor_min { uByte bDescLength; uByte bDescriptorType; uByte bNbrPorts; uWord wHubCharacteristics; uByte bPwrOn2PwrGood; uByte bHubContrCurrent; uByte DeviceRemovable[1]; uByte PortPowerCtrlMask[1]; } __attribute__((packed)); typedef struct usb_hub_descriptor_min usb_hub_descriptor_min_t; #define USB_DT_DEVICE_QUALIFIER_SIZE 10 struct usb_device_qualifier { uByte bLength; uByte bDescriptorType; uWord bcdUSB; uByte bDeviceClass; uByte bDeviceSubClass; uByte bDeviceProtocol; uByte bMaxPacketSize0; uByte bNumConfigurations; uByte bReserved; } __attribute__((packed)); typedef struct usb_device_qualifier usb_device_qualifier_t; struct usb_otg_descriptor { uByte bLength; uByte bDescriptorType; uByte bmAttributes; #define UOTG_SRP 0x01 #define UOTG_HNP 0x02 } __attribute__((packed)); typedef struct usb_otg_descriptor usb_otg_descriptor_t; /* OTG feature selectors */ #define UOTG_B_HNP_ENABLE 3 #define UOTG_A_HNP_SUPPORT 4 #define UOTG_A_ALT_HNP_SUPPORT 5 struct usb_status { uWord wStatus; /* Device status flags */ #define UDS_SELF_POWERED 0x0001 #define UDS_REMOTE_WAKEUP 0x0002 /* Endpoint status flags */ #define UES_HALT 0x0001 } __attribute__((packed)); typedef struct usb_status usb_status_t; struct usb_hub_status { uWord wHubStatus; #define UHS_LOCAL_POWER 0x0001 #define UHS_OVER_CURRENT 0x0002 uWord wHubChange; } __attribute__((packed)); typedef struct usb_hub_status usb_hub_status_t; struct usb_port_status { uWord wPortStatus; #define UPS_CURRENT_CONNECT_STATUS 0x0001 #define UPS_PORT_ENABLED 0x0002 #define UPS_SUSPEND 0x0004 #define UPS_OVERCURRENT_INDICATOR 0x0008 #define UPS_RESET 0x0010 #define UPS_PORT_L1 0x0020 /* USB 2.0 only */ /* The link-state bits are valid for Super-Speed USB HUBs */ #define UPS_PORT_LINK_STATE_GET(x) (((x) >> 5) & 0xF) #define UPS_PORT_LINK_STATE_SET(x) (((x) & 0xF) << 5) #define UPS_PORT_LS_U0 0x00 #define UPS_PORT_LS_U1 0x01 #define UPS_PORT_LS_U2 0x02 #define UPS_PORT_LS_U3 0x03 #define UPS_PORT_LS_SS_DIS 0x04 #define UPS_PORT_LS_RX_DET 0x05 #define UPS_PORT_LS_SS_INA 0x06 #define UPS_PORT_LS_POLL 0x07 #define UPS_PORT_LS_RECOVER 0x08 #define UPS_PORT_LS_HOT_RST 0x09 #define UPS_PORT_LS_COMP_MODE 0x0A #define UPS_PORT_LS_LOOPBACK 0x0B #define UPS_PORT_LS_RESUME 0x0F #define UPS_PORT_POWER 0x0100 #define UPS_PORT_POWER_SS 0x0200 /* super-speed only */ #define UPS_LOW_SPEED 0x0200 #define UPS_HIGH_SPEED 0x0400 #define UPS_OTHER_SPEED 0x0600 /* currently FreeBSD specific */ #define UPS_PORT_TEST 0x0800 #define UPS_PORT_INDICATOR 0x1000 #define UPS_PORT_MODE_DEVICE 0x8000 /* currently FreeBSD specific */ uWord wPortChange; #define UPS_C_CONNECT_STATUS 0x0001 #define UPS_C_PORT_ENABLED 0x0002 #define UPS_C_SUSPEND 0x0004 #define UPS_C_OVERCURRENT_INDICATOR 0x0008 #define UPS_C_PORT_RESET 0x0010 #define UPS_C_PORT_L1 0x0020 /* USB 2.0 only */ #define UPS_C_BH_PORT_RESET 0x0020 /* USB 3.0 only */ #define UPS_C_PORT_LINK_STATE 0x0040 #define UPS_C_PORT_CONFIG_ERROR 0x0080 } __attribute__((packed)); typedef struct usb_port_status usb_port_status_t; /* * The "USB_SPEED" macros defines all the supported USB speeds. */ enum usb_dev_speed { USB_SPEED_VARIABLE, USB_SPEED_LOW, USB_SPEED_FULL, USB_SPEED_HIGH, USB_SPEED_SUPER, }; #define USB_SPEED_MAX (USB_SPEED_SUPER+1) /* * The "USB_REV" macros defines all the supported USB revisions. */ enum usb_revision { USB_REV_UNKNOWN, USB_REV_PRE_1_0, USB_REV_1_0, USB_REV_1_1, USB_REV_2_0, USB_REV_2_5, USB_REV_3_0 }; #define USB_REV_MAX (USB_REV_3_0+1) /* * Supported host controller modes. */ enum usb_hc_mode { USB_MODE_HOST, /* initiates transfers */ USB_MODE_DEVICE, /* bus transfer target */ USB_MODE_DUAL /* can be host or device */ }; #define USB_MODE_MAX (USB_MODE_DUAL+1) /* * The "USB_STATE" enums define all the supported device states. */ enum usb_dev_state { USB_STATE_DETACHED, USB_STATE_ATTACHED, USB_STATE_POWERED, USB_STATE_ADDRESSED, USB_STATE_CONFIGURED, }; #define USB_STATE_MAX (USB_STATE_CONFIGURED+1) /* * The "USB_EP_MODE" macros define all the currently supported * endpoint modes. */ enum usb_ep_mode { USB_EP_MODE_DEFAULT, USB_EP_MODE_STREAMS, /* USB3.0 specific */ USB_EP_MODE_HW_MASS_STORAGE, USB_EP_MODE_HW_SERIAL, USB_EP_MODE_HW_ETHERNET_CDC, USB_EP_MODE_HW_ETHERNET_NCM, USB_EP_MODE_MAX }; /* * Test Mode Selectors * See USB 2.0 spec Table 9-7 */ enum test_selector { TEST_J = 1, TEST_K = 2, TEST_SE0_NAK = 3, TEST_PACKET = 4, TEST_FORCE_EN = 5, }; #endif /* _USB_STANDARD_H_ */