/* * Copyright (c) 2001-2003 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Simon Goldschmidt * */ #ifndef LWIP_HDR_LWIPOPTS_H #define LWIP_HDR_LWIPOPTS_H #include "stdlib.h" #include "net_config.h" #include "lwipports.h" #if defined (CONFIG_MBEDTLS_LIB_SUPPORT) #include "mbedtls_config.h" #endif #include "quec_proj_config.h" #include "quec_proj_config_at.h" #ifdef CONFIG_NET_LWIP_IPV4_ON #define LWIP_IPV4_ON #endif #ifdef CONFIG_NET_LWIP_IPV6_ON #define LWIP_IPV6_ON #endif #ifdef CONFIG_NET_LWIP_RFACK_ON #define LWIP_RFACK 1 #else #define LWIP_RFACK 0 #endif #ifdef LWIP_IPV6_ON #define LWIP_IPV6 1 #define LWIP_IPV6_FRAG 1 #else #ifdef LTE_NBIOT_SUPPORT #define LWIP_IPV6 1 #define LWIP_IPV6_FRAG 1 #else #define LWIP_IPV6 0 #endif //LTE_NBIOT_SUPPORT #endif //LWIP_IPV6_ON #ifdef LWIP_IPV4_ON #define LWIP_IPV4 1 #else #ifdef LTE_NBIOT_SUPPORT #define LWIP_IPV4 1 #else #define LWIP_IPV4 0 #endif //LTE_NBIOT_SUPPORT #endif //LWIP_IPV4_ON #ifdef CONFIG_LWIP_TCP_SACK_SUPPORT /** * LWIP_TCP_SACK_OUT==1: TCP will support sending selective acknowledgements (SACKs). */ #define LWIP_TCP_SACK_OUT 1 #define LWIP_TCP_MAX_SACK_NUM 4 #else #define LWIP_TCP_SACK_OUT 0 #endif #ifdef CONFIG_QUEC_PROJECT_FEATURE_NW #if LWIP_IPV6 #define LWIP_ND6_NUM_PREFIXES 14 #define LWIP_ND6_NUM_ROUTERS 14 #endif #endif #ifndef CONFIG_TB_API_SUPPORT #define IP_NAT_APN_AUTO_SWITCH 1 #else #define IP_NAT_APN_AUTO_SWITCH 0 #endif #ifdef CONFIG_NET_NAT_SUPPORT #define IP_NAT 1 #define IP_NAT_INTERNAL_FORWARD 0 //quectel open macro and update 1->0 #else #define IP_NAT 0 #endif #ifdef CONFIG_NET_LWIP_DEBUG #define LWIP_DEBUG 1 #define ALTCP_MBEDTLS_DEBUG 1 #else #define LWIP_DEBUG 0 #define ALTCP_MBEDTLS_DEBUG 0 #endif #define IP_REASS_MAX_PBUFS 50 #if 0 #define ETHARP_DEBUG 0 #define NETIF_DEBUG 0 #define PBUF_DEBUG 0 #define API_LIB_DEBUG 0 #define API_MSG_DEBUG 0 #define SOCKETS_DEBUG 1 #define ICMP_DEBUG 0 #define IGMP_DEBUG 0 #define INET_DEBUG 0 #define IP_DEBUG 0 #define IP_REASS_DEBUG 0 #define RAW_DEBUG 0 #define MEM_DEBUG 0 #define MEMP_DEBUG 0 #define TCP_INPUT_DEBUG 0 #define TCP_FR_DEBUG 0 #define TCP_RTO_DEBUG 0 #define TCP_CWND_DEBUG 0 #define TCP_WND_DEBUG 0 #define TCP_OUTPUT_DEBUG 0 #define TCP_RST_DEBUG 0 #define TCP_QLEN_DEBUG 0 #define UDP_DEBUG 0 #define TCPIP_DEBUG 1 #define SLIP_DEBUG 0 #define DHCP_DEBUG 0 #define AUTOIP_DEBUG 0 #define IP6_DEBUG 0 #define NAT_DEBUG 0 #endif #ifdef CONFIG_NET_LWIP_PPP_ON #define PPP_SUPPORT 1 #else #define PPP_SUPPORT 0 #endif #define PPP_SERVER PPP_SUPPORT #define CCP_SUPPORT 0 #define PPP_PROTOCOLNAME PPP_SUPPORT #define PRINTPKT_SUPPORT PPP_SUPPORT #define PPP_NOTIFY_PHASE PPP_SUPPORT #ifdef CONFIG_QUEC_PROJECT_FEATURE_PPP #define PAP_SUPPORT 1 #define CHAP_SUPPORT 1 #else #define PAP_SUPPORT 0 #define CHAP_SUPPORT 0 #endif #define EAP_SUPPORT 0 #define MPPE_SUPPORT 0 #define VJ_SUPPORT 0 #ifdef CONFIG_QUEC_PROJECT_FEATURE_SSL #define LWIP_USE_EXTERNAL_MBEDTLS PPP_SUPPORT #else #define LWIP_USE_EXTERNAL_MBEDTLS 0 #endif #define SLIPIF_THREAD_STACKSIZE 8192 #define SLIPIF_THREAD_PRIO OSI_PRIORITY_NORMAL #define PAP_FOR_SIM_AUTH 1 #ifdef CONFIG_QUEC_PROJECT_FEATURE_PPP #define PPP_AUTHGPRS_SUPPORT 1 #else #define PPP_AUTHGPRS_SUPPORT 0 #endif #define LWIP_TCP_KEEPALIVE 1 #ifdef LTE_NBIOT_SUPPORT #define LWIP_IPV6_DUP_DETECT_ATTEMPTS 0 #endif #define LWIP_NETIF_LOOPBACK 1 #define LWIP_HAVE_LOOPIF 1 /** LWIP_ALTCP_TLS_MBEDTLS==1: use mbedTLS for TLS support for altcp API * mbedtls include directory must be reachable via include search path */ #if defined (CONFIG_MBEDTLS_LIB_SUPPORT) #define LWIP_ALTCP_TLS_MBEDTLS 1 #define LWIP_ALTCP_TLS 1 #else #define LWIP_ALTCP_TLS_MBEDTLS 0 #define LWIP_ALTCP_TLS 0 #endif /* Prevent having to link sys_arch.c (we don't test the API layers in unit tests) */ #define NO_SYS 0 //#define LWIP_PROVIDE_ERRNO #define LWIP_ERRNO_STDINCLUDE #define SYS_LIGHTWEIGHT_PROT 1 #define LWIP_NETCONN 0 #define LWIP_SOCKET 1 #define LWIP_DNS 1 #define LWIP_RAW 1 #if defined (CONFIG_QUEC_PROJECT_FEATURE_ETHERNET) || defined(CONFIG_QUEC_PROJECT_FEATURE_WIFI) #define LWIP_NETIF_API 1 #else #define LWIP_NETIF_API 0 #endif #ifdef CONFIG_QUEC_PROJECT_FEATURE_LWIP #define LWIP_NETIF_STATUS_CALLBACK 1 #endif #define LWIP_TCPIP_CORE_LOCKING 1 #define LWIP_TCPIP_CORE_LOCKING_INPUT 1 #define LWIP_ARP 1 #define LWIP_TIMERS 0 #define LWIP_TIMEVAL_PRIVATE 0 /* Enable DHCP to test it, disable UDP checksum to easier inject packets */ #define LWIP_ACD 0 #ifdef CONFIG_QUEC_PROJECT_FEATURE_LWIP #define LWIP_DHCP 1 /*quectel default. netiflinkup ecm/rndis; External WIFI*/ #else #define LWIP_DHCP 0 #endif #define LWIP_IPV6_MLD 1 #ifdef LTE_NBIOT_SUPPORT #define MEMP_MEM_MALLOC 1 #else #define MEMP_MEM_MALLOC 1 #endif #define MEM_LIBC_MALLOC 1 #define mem_clib_free free #define mem_clib_malloc malloc #define mem_clib_calloc //#define malloc COS_MALLOC #ifdef CONFIG_SOC_8811 #define DEFAULT_UDP_RECVMBOX_SIZE 32 #define DEFAULT_TCP_RECVMBOX_SIZE 64 #define DEFAULT_RAW_RECVMBOX_SIZE 64 #else #define DEFAULT_UDP_RECVMBOX_SIZE 16 #ifdef CONFIG_QUEC_PROJECT_FEATURE_LWIP #define DEFAULT_TCP_RECVMBOX_SIZE 256 #else #define DEFAULT_TCP_RECVMBOX_SIZE 600 #endif #define DEFAULT_RAW_RECVMBOX_SIZE 16 #endif #define LWIP_SO_RCVTIMEO 1 //quectel larson.li 2021.01.29 ali_linkSDK support #define LWIP_SO_RCVBUF 1 #define LWIP_MPU_COMPATIBLE 1 #define SO_REUSE 1 #ifdef CONFIG_SOC_8811 #define MEM_SIZE 8192*3 #else #define MEM_SIZE 81920 #endif #ifdef CONFIG_QUEC_PROJECT_FEATURE_LWIP #define MEMP_NUM_NETCONN 15 #else #define MEMP_NUM_NETCONN 8 #endif #define MEMP_NUM_UDP_PCB MEMP_NUM_NETCONN #define MEMP_NUM_TCP_PCB MEMP_NUM_NETCONN #define LWIP_SO_LINGER 1 #ifdef CONFIG_NET_LWIP_TCP_ON #define LWIP_TCP 1 #define TCP_MAXRTX 6 /** LWIP_ALTCP==1: enable the altcp API * altcp is an abstraction layer that prevents applications linking against the * tcp.h functions but provides the same functionality. It is used to e.g. add * SSL/TLS or proxy-connect support to an application written for the tcp callback * API without that application knowing the protocol details. * Applications written against the altcp API are directly linked against the * tcp callback API for LWIP_ALTCP==0, but then cannot use layered protocols. */ #define LWIP_ALTCP 1 /** LWIP_ALTCP_TLS==1: enable TLS support for altcp API. * This needs a port of the functions in altcp_tls.h to a TLS library. * A port to ARM mbedtls is provided with lwIP, see apps/altcp_tls/ directory * and LWIP_ALTCP_TLS_MBEDTLS option. */ #else #define LWIP_TCP 0 /** LWIP_ALTCP==1: enable the altcp API * altcp is an abstraction layer that prevents applications linking against the * tcp.h functions but provides the same functionality. It is used to e.g. add * SSL/TLS or proxy-connect support to an application written for the tcp callback * API without that application knowing the protocol details. * Applications written against the altcp API are directly linked against the * tcp callback API for LWIP_ALTCP==0, but then cannot use layered protocols. */ #define LWIP_ALTCP 0 /** LWIP_ALTCP_TLS==1: enable TLS support for altcp API. * This needs a port of the functions in altcp_tls.h to a TLS library. * A port to ARM mbedtls is provided with lwIP, see apps/altcp_tls/ directory * and LWIP_ALTCP_TLS_MBEDTLS option. */ #define LWIP_ALTCP_TLS 0 #endif /* Minimal changes to opt.h required for tcp unit tests: */ #define PBUF_POOL_BUFSIZE 1600 #if 0 #define TCP_SND_QUEUELEN 40 #define MEMP_NUM_TCP_SEG TCP_SND_QUEUELEN #define TCP_SND_BUF (12 * TCP_MSS) #define TCP_WND (10 * TCP_MSS) #define LWIP_WND_SCALE 1 #define TCP_RCV_SCALE 0 #define PBUF_POOL_SIZE 40 /* pbuf tests need ~200KByte */ #define MEMP_NUM_SYS_TIMEOUT 16 #elif defined(CONFIG_QUEC_PROJECT_FEATURE_LWIP) #ifdef CONFIG_QUEC_PROJECT_FEATURE_TCP_WINDOWSIZE_AT #define TCP_MSS 1360 extern int g_tcp_recv_window_size; extern int g_tcp_send_window_size; #define TCP_WND g_tcp_recv_window_size #define TCP_SND_BUF g_tcp_send_window_size #define TCP_WND_DEF 16 * 1024 #define TCP_SND_BUF_DEF 16 * 1024 #define TCP_SND_BUF_MIN 16 * 1024 #define TCP_SND_BUF_MAX 100 * 1024 #define MEMP_NUM_TCP_SEG TCP_SND_QUEUELEN #define LWIP_WND_SCALE 1 #define TCP_RCV_SCALE 2 #define PBUF_POOL_SIZE 250 #else #define TCP_MSS 1360 #define TCP_WND (97 * TCP_MSS) #define TCP_SND_BUF (8 * TCP_MSS) #define MEMP_NUM_TCP_SEG TCP_SND_QUEUELEN #define LWIP_WND_SCALE 1 #define TCP_RCV_SCALE 2 #define PBUF_POOL_SIZE 200 #endif #else #define TCP_MSS 1360 #define TCP_WND (42 * TCP_MSS) //quectel update from 16 to 42 #define TCP_SND_BUF (8 * TCP_MSS) #define MEMP_NUM_TCP_SEG TCP_SND_QUEUELEN #define LWIP_WND_SCALE 1 #define TCP_RCV_SCALE 0 #define PBUF_POOL_SIZE 50 //quectel update from 40 to 50 #endif #define LWIP_STATS 0 #define LWIP_ICMP 1 #define MEM_ALIGNMENT 4 #define ETH_PAD_SIZE 0 /* Enable IGMP and MDNS for MDNS tests */ #define LWIP_IGMP 0 #define LWIP_MDNS_RESPONDER 0 #define LWIP_NUM_NETIF_CLIENT_DATA (LWIP_MDNS_RESPONDER) /* Minimal changes to opt.h required for etharp unit tests: */ #define ETHARP_SUPPORT_STATIC_ENTRIES 0 #define USE_CUSTOMER_THREAD !LWIP_TIMERS #define TCPIP_THREAD_STACKSIZE 8192 #define TCPIP_THREAD_PRIO OSI_PRIORITY_NORMAL #if !LWIP_DEBUG #define tcp_debug_print_pcbs() #define sys_arch_assert(x) #define sys_arch_printf(format, ...) #define sys_arch_dump(Data, Size) #define LWIP_DBG_ALL 0 #define LWIP_NOASSERT 1 #else extern void tcp_debug_print_pcbs(void); #define sys_arch_assert(x) do {sys_arch_printf("Assertion \"%s\" failed at line %d in %s\n", \ x, __LINE__, __FILE__); fflush(NULL); abort();} while(0) extern void sys_arch_printf(const char *format, ...) __attribute__((format(printf, 1, 2))); extern void sys_arch_dump(const void *Data, uint16_t Size); #ifdef CONFIG_QUEC_PROJECT_FEATURE typedef enum { QUEC_CAP_DATA_TYPE_NULL = 0, QUEC_CAP_DATA_TYPE_IP_UP = 1, QUEC_CAP_DATA_TYPE_IP_DOWN = 2, QUEC_CAP_DATA_TYPE_ETHER_UP = 3, QUEC_CAP_DATA_TYPE_ETHER_DOWN = 4 } quec_cap_type_e; void sys_ether_arch_dump(quec_cap_type_e type, const void *Data, uint16_t Size); #endif #define LWIP_DBG_ALL LWIP_DBG_ON #define TCP_DEBUG_PCB_LISTS 1 #endif #define TCP_DEBUG 1 #define LWIP_HOOK_IP4_ROUTE_SRC(src, dest) ip4_src_route(src, dest) extern struct netif *getEtherNetIf(uint8_t nCid); extern void sys_post_ICMPevent_to_APP(uint32_t nsocketId, uint32_t nParam1, uint32_t nParam2); extern uint32_t wifi_IpaddrUpdateInd(struct netif *netif_tmp); extern uint32_t *getDNSServer(uint8_t nCid, uint8_t nSimID); #define socklen_t int #endif /* LWIP_HDR_LWIPOPTS_H */