/*================================================================ Copyright (c) 2021, Quectel Wireless Solutions Co., Ltd. All rights reserved. Quectel Wireless Solutions Proprietary and Confidential. =================================================================*/ #ifndef QUEC_API_EVENT_DEF_H #define QUEC_API_EVENT_DEF_H #include "ql_api_common.h" /*************************** general define *******************************/ /*************************** app event id defination *******************************/ //event id, unsigned type /* * event ID definition * * 4 bytes, little endian, unsigned type, as below: * * ------------------------------------------------------------------------------------------------------ * | 4 | 3 | 2 | 1 | * ------------------------------------------------------------------------------------------------------ * | High byte of component ID | low byte of component ID | High byte of event ID | low byte of event ID| * ------------------------------------------------------------------------------------------------------ * * component ID defined at enum type . * detail errcode defined by each component. * */ typedef enum { QUEC_APP_EVENT_ID_MIN = 1|(QL_COMPONENT_OSI<<16), QUEC_TEST_EVENT_ID_1, QUEC_TEST_EVENT_ID_2, QUEC_TEST_EVENT_ID_3, QUEC_KERNEL_FEED_DOG, //network QUEC_NW_SIGNAL_QUALITY_IND = 1|(QL_COMPONENT_NETWORK<<16), QUEC_NW_VOICE_REG_STATUS_IND, QUEC_NW_DATA_REG_STATUS_IND, QUEC_NW_NITZ_TIME_UPDATE_IND, QUEC_NW_JAMMING_DETECT_IND, QUEC_NW_CAUSE_IND, QUEC_NW_CELL_INFO_REQ, QUEC_NW_CELL_INFO_IND, //datacall QUEC_DATACALL_ACT_RSP_IND = 1|(QL_COMPONENT_NETWORK_MANAGE<<16), QUEC_DATACALL_DEACT_RSP_IND, QUEC_DATACALL_PDP_DEACTIVE_IND, //usbnet QUEC_USBNET_START_RSP_IND = 1|(QL_COMPONENT_NETWORK_USBNET<<16), //response of usbnet start QUEC_USBNET_DEACTIVE_IND, //usbnet down, The cause may be loss of network coverage or detached by the network QUEC_USBNET_PORT_CONNECT_IND, //usb plug in QUEC_USBNET_PORT_DISCONNECT_IND, //usb pull out //uart QUEC_UART_RX_RECV_DATA_IND = 1|(QL_COMPONENT_BSP_UART<<16), QUEC_UART_RX_OVERFLOW_IND, QUEC_UART_TX_FIFO_COMPLETE_IND, QUEC_UART_TX_COMPLETE_APP_IND, QUEC_UART_RX_RECV_DATA_APP_IND, //usb QUEC_USB_LINESTATE_IND = 1|(QL_COMPONENT_BSP_USB<<16), //only used for kernel, to handle usb linestate //uac QUEC_USB_AUDIO_CREATE_DONE = 2000|(QL_COMPONENT_BSP_USB<<16), //UAC created ok, only used for kernel QUEC_USB_AUDIO_DATA_IN = 2001|(QL_COMPONENT_BSP_USB<<16), //UAC received data, only used for kernel QUEC_USB_AUDIO_START_PLAY = 2002|(QL_COMPONENT_BSP_USB<<16), //UAC start receive data, only used for kernel QUEC_USB_AUDIO_STOP_PLAY = 2003|(QL_COMPONENT_BSP_USB<<16), //UAC stop receive data, only used for kernel QUEC_USB_AUDIO_START_RECORD = 2004|(QL_COMPONENT_BSP_USB<<16), //UAC start send data to host, only used for kernel QUEC_USB_AUDIO_STOP_RECORD = 2005|(QL_COMPONENT_BSP_USB<<16), //UAC stop send data to host, only used for kernel //bt QUEC_BT_START_STATUS_IND = 1|(QL_COMPONENT_BSP_BT<<16), //bt/ble start QUEC_BT_STOP_STATUS_IND, //bt/ble stop QUEC_BT_BLE_RESET_IND, //bt/ble reset.need to stop bt and restart QUEC_BT_VISIBILE_IND, // QUEC_BT_HIDDEN_IND, QUEC_BT_SET_LOCALNAME_IND, QUEC_BT_SET_LOCALADDR_IND, QUEC_BT_INQUIRY_IND, QUEC_BT_INQUIRY_END_IND, QUEC_BT_BOND_IND, QUEC_BT_BOND_STATE_IND, QUEC_BT_CONNECT_IND, QUEC_BT_DISCONNECT_IND, QUEC_BT_HFP_CONNECTION_IND, //ble //all:server and client can recieve this event //server:only server can recieve this event //client:only client can recieve this event QUEC_BLE_CONNECT_IND = 100|(QL_COMPONENT_BSP_BT<<16), //all:ble connect QUEC_BLE_DISCONNECT_IND, //all:ble disconnect QUEC_BLE_UPDATE_CONN_PARAM_IND, //all:ble update connection parameter QUEC_BLESCAN_REPORT_IND, //client:ble gatt cliet scan and report other devices QUEC_BLE_GATT_MTU, //all:ble connection mtu QUEC_BLE_GATT_RECV_IND, //server:when ble client write characteristic value or descriptor,server get the notice QUEC_BLE_GATT_RECV_READ_IND, //server:when ble client read characteristic value or descriptor,server get the notice QUEC_BLE_GATT_RECV_NOTIFICATION_IND, //client:client recieve notification QUEC_BLE_GATT_RECV_INDICATION_IND, //client:client recieve indication QUEC_BLE_GATT_SEND_END, //server send notification,and recieve send end notice QUEC_BLE_GATT_START_DISCOVER_SERVICE_IND, //client:start discover service QUEC_BLE_GATT_DISCOVER_SERVICE_IND, //client:discover service QUEC_BLE_GATT_DISCOVER_CHARACTERISTIC_DATA_IND, //client:discover characteristic QUEC_BLE_GATT_DISCOVER_CHARA_DESC_IND, //client:discover characteristic descriptor QUEC_BLE_GATT_CHARA_WRITE_WITH_RSP_IND, //client:write characterisctc value with response QUEC_BLE_GATT_CHARA_WRITE_WITHOUT_RSP_IND, //client:write characteristic value without response QUEC_BLE_GATT_CHARA_READ_IND, //client:read characteristic value by hanlde QUEC_BLE_GATT_CHARA_READ_BY_UUID_IND, //client:read characteristic value by uuid QUEC_BLE_GATT_CHARA_MULTI_READ_IND, //client:read miltiple characteristic value QUEC_BLE_GATT_DESC_WRITE_WITH_RSP_IND, //client:wirte characteristic descriptor QUEC_BLE_GATT_DESC_READ_IND, //client:read characteristic descriptor QUEC_BLE_GATT_ATT_ERROR_IND, //client:attribute error QUEC_BLE_GATT_STATE_CHANGE_IND, //server:通道改变 QUEC_BLE_GATT_SEND_NODIFY_IND, //server:通知server线程从缓存里读取数据发送，只在标准版本使用 QUEC_BT_HFP_CONNECT_IND= 200|(QL_COMPONENT_BSP_BT<<16), //bt hfp connected QUEC_BT_HFP_DISCONNECT_IND, //bt hfp disconnected QUEC_BT_HFP_CALL_IND, //bt hfp call state callback QUEC_BT_HFP_CALL_SETUP_IND, //bt hfp call setup state callback QUEC_BT_HFP_NETWORK_IND, //bt hfp network state callback QUEC_BT_HFP_NETWORK_SIGNAL_IND, //bt hfp network signal callback QUEC_BT_HFP_BATTERY_IND, //bt hfp battery level callback QUEC_BT_HFP_CALLHELD_IND, //bt hfp callheld state callback QUEC_BT_HFP_AUDIO_IND, //bt hfp audio state callback QUEC_BT_HFP_VOLUME_IND, //bt hfp volume type callback QUEC_BT_HFP_NETWORK_TYPE_IND, //bt hfp network type callback QUEC_BT_HFP_RING_IND, //bt hfp ring indication callback QUEC_BT_HFP_CODEC_IND, //bt hfp codec type callback QUEC_BT_A2DP_AUDIO_CONFIG_IND = 300|(QL_COMPONENT_BSP_BT<<16), //bt a2dp audio config callback QUEC_BT_A2DP_AUDIO_STATE_START_IND, //bt a2dp audio state start callback QUEC_BT_A2DP_AUDIO_STATE_STOPPED_IND, //bt a2dp audio state stop callback QUEC_BT_A2DP_CONNECTION_STATE_CONNECTED_IND, //bt a2dp connect callback QUEC_BT_A2DP_CONNECTION_STATE_DISCONNECTED_IND, //bt a2dp disconnect callback QUEC_BT_AVRCP_CONNECTION_STATE_CONNECTED_IND = 400|(QL_COMPONENT_BSP_BT<<16), //bt avrcp connect callback QUEC_BT_AVRCP_CONNECTION_STATE_DISCONNECTED_IND, //bt avrcp disconnect callback QUEC_BT_AVRCP_VOLUME_CHANGE_IND, //bt avrcp volume change callback QUEC_BT_SPP_CONNECT_IND= 500|(QL_COMPONENT_BSP_BT<<16),//bt spp connected callback QUEC_BT_SPP_DISCONNECT_IND, //bt spp disconnected callback QUEC_BT_SPP_REVDATA_IND, //bt spp receive data callback //led_cfg(network status for netlight) QUEC_LEDCFG_EVENT_IND = 1|(QL_COMPONENT_BSP_PWM<<16), QUEC_LEDCFG_CB_CREATE_IND, QUEC_VIRTUAL_PWM_EVENT, QUEC_LEDCFG_VIRT_PWM_EVENT, QUEC_HR_VIRT_PWM_EVENT, //sleep QUEC_SLEEP_ENETR_AUTO_SLEPP = 1 | (QL_COMPONENT_PM_SLEEP << 16), QUEC_SLEEP_EXIT_AUTO_SLEPP = 2 | (QL_COMPONENT_PM_SLEEP << 16), //power QUEC_SLEEP_QUICK_POWER_DOWM = 1 | (QL_COMPONENT_PM << 16), QUEC_SLEEP_NORMAL_POWER_DOWM = 2 | (QL_COMPONENT_PM << 16), QUEC_SLEEP_QUICK_RESET = 3 | (QL_COMPONENT_PM << 16), QUEC_SLEEP_NORMAL_RESET = 4 | (QL_COMPONENT_PM << 16), QUEC_SLEEP_FAST_POWEROFF = 5 | (QL_COMPONENT_PM << 16), //sim QL_PBK_INIT_OK_IND = 1 | (QL_COMPONENT_SIM << 16), QUEC_SIM_APREADY_CMD_IND = 2 | (QL_COMPONENT_SIM << 16), //vsim adapt QUEC_VSIM_ADAPT_POWERON_IND = 1 | (QL_COMPONENT_VSIM_ADAPT << 16), QUEC_VSIM_ADAPT_RDY_IND = 2 | (QL_COMPONENT_VSIM_ADAPT << 16), //FOR standard AT solution, not cared in OPEN project. QUEC_VSIM_ADAPT_VSIM_AT_IND = 3 | (QL_COMPONENT_VSIM_ADAPT << 16), //FOR standard AT solution, not cared in OPEN project. //old feature, don't used //pwrkey QUEC_PWRKEY_SHUTDOWN_START_IND = 1 | (QL_COMPONENT_BSP_KEYPAD << 16), QUEC_PWRKEY_PRESS_IND, QUEC_PWRKEY_RELEASE_IND, QUEC_PWRKEY_LONGPRESS_IND, //wifiscan QUEC_WIFISCAN_EVENT_DO = 1 | (QL_COMPONENT_BSP_WIFISCAN << 16), QUEC_WIFISCAN_EVENT_TIMEOUT = 2 | (QL_COMPONENT_BSP_WIFISCAN << 16), QUEC_WIFISCAN_EVENT_ASYNC_IND = 5 | (QL_COMPONENT_BSP_WIFISCAN << 16), //gnss QUEC_GNSS_REC_NMEA_IND = 1 | (QL_COMPONENT_BSP_GNSS<<16), QUEC_GNSS_POWER_EVENT_REQ, QUEC_GNSS_RESTART_EVENT_REQ, QUEC_GNSS_MODE_AND_AGNSS_IND, QUEC_GNSS_AGPS_IND, QUEC_GNSS_START_RF_REQ, QUEC_GNSS_SLEEP_IND, QUEC_GNSS_FIX_IND, QUEC_GNSS_MODE_CONVER_IND, QUEC_GNSS_HSL_ABORT_IND, QUEC_GNSS_HSL_RECOVERY_IND, QUEC_GNSS_STARTMODE_IND, QUEC_GNSS_STATE_IND, QUEC_GNSS_DISABLE_STATUS_IND, //lvgl QUEC_LVGL_QUIT_IND= 1|(QL_COMPONENT_BSP_LVGL<<16), //virt at QUEC_VIRT_AT_RX_RECV_DATA_IND = 1 | (QL_COMPONENT_BSP_VIRT_AT<<16), //sd QUEC_SDDET_EVENT_IND = 1 | (QL_COMPONENT_STORAGE_SDEMMC<<16), //tts QUEC_TTS_START_PLAY = 1 | (QL_COMPONENT_AUDIO_TTS<<16), //headset_det QUEC_HEADSET_DET_EVENT_IND = 1 | (QL_COMPONENT_AUDIO_HEADSET<<16), //stk QUEC_STK_PROACTIVE_CMD_IND = 1 | (QL_COMPONENT_STK<<16), QUEC_STK_NO_PROACTIVE_CMD_IND = 2 | (QL_COMPONENT_STK<<16), QUEC_STK_TIMEOUT_IND = 3 | (QL_COMPONENT_STK<<16), QUEC_STK_SIM_LOST_IND = 4 | (QL_COMPONENT_STK<<16), // tcpip app QUEC_TCPIP_APP_PDP_EVT_IND = 1 | (QL_COMPONENT_LWIP << 16), //AT Command QUEC_RECEIVE_NEW_AT = 1|(QL_COMPONENT_AT << 16), QUEC_AT_RESP = 2|(QL_COMPONENT_AT << 16), QUEC_AT_RECEIVE_DATA = 3|(QL_COMPONENT_AT << 16), QUEC_AT_FINISH = 4|(QL_COMPONENT_AT << 16), QUEC_AT_RECEIVE_CB = 5|(QL_COMPONENT_AT << 16), QUEC_AT_BYPASS_NEW_DATA = 6|(QL_COMPONENT_AT << 16), QUEC_AT_CMUX_NEW_DATA = 7|(QL_COMPONENT_AT << 16), QUEC_AT_CMUX_SEND_DATA = 8|(QL_COMPONENT_AT << 16), QUEC_AT_CMUX_CLOSE = 9|(QL_COMPONENT_AT << 16), //queclocator QUEC_LBS_EVENT_WIFISCAN_REC = 1 | (QL_COMPONENT_LWIP_LBS << 16), //BSP GPIO QUEC_GPIOCTRL_EVENT_IND = 1 | (QL_COMPONENT_BSP_GPIO << 16), QUEC_GPIOCTRL_TIMER_EVENT_IND = 2 | (QL_COMPONENT_BSP_GPIO << 16), //ETHERNET QUEC_ETHERNET_DRV_INT = 1 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_DRV_DATA_OUTPUT = 2 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_DRV_STATUS_CHECK = 3 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_DRV_TRY_RESET = 4 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_DRV_TRY_CONNECT = 5 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_DRV_NET_CREATE = 6 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_APP_CONNECTED = 7 | (QL_COMPONENT_ETHERNET<<16), QUEC_ETHERNET_APP_DISCONNECTED = 8 | (QL_COMPONENT_ETHERNET<<16), // //next is reserved for app to add event id! // QL_EVENT_APP_START = 1 | (QL_COMPONENT_APP_START<<16),//app event start QL_EVEN_MAX = 0xFFFF | (QL_COMPONENT_MAX<<16),//event max }ql_api_event_id_e; /*************************** task priority defination ******************************/ typedef enum { APP_PRIORITY_IDLE = 1, // reserved APP_PRIORITY_LOW = 4, APP_PRIORITY_BELOW_NORMAL = 8, APP_PRIORITY_NORMAL = 12, APP_PRIORITY_ABOVE_NORMAL = 16, APP_PRIORITY_HIGH = 25, APP_PRIORITY_REALTIME = 30 }APP_ThreadPriority_e; /**************************** error code about osi ***************************/ typedef enum { QL_OSI_SUCCESS = 0, QL_OSI_TASK_PARAM_INVALID = 1 | (QL_COMPONENT_OSI << 16), QL_OSI_TASK_CREATE_FAIL, QL_OSI_NO_MEMORY, QL_OSI_TASK_DELETE_FAIL, QL_OSI_TASK_PRIO_INVALID, QL_OSI_TASK_NAME_INVALID, QL_OSI_TASK_EVENT_COUNT_INVALID, QL_OSI_INVALID_TASK_REF, QL_OSI_TASK_CNT_REACH_MAX, QL_OSI_TASK_BIND_EVENT_FAIL, QL_OSI_TASK_UNBIND_EVENT_FAIL, QL_OSI_TASK_GET_REF_FAIL, QL_OSI_TASK_GET_PRIO_FAIL, QL_OSI_TASK_SET_PRIO_FAIL, QL_OSI_TASK_GET_STATUS_FAIL, QL_OSI_TASK_HAS_BINDED_TIMER, QL_OSI_QUEUE_CREATE_FAIL = 50 | (QL_COMPONENT_OSI << 16), QL_OSI_QUEUE_DELETE_FAIL, QL_OSI_QUEUE_IS_FULL, QL_OSI_QUEUE_RELEASE_FAIL, QL_OSI_QUEUE_RECEIVE_FAIL, QL_OSI_QUEUE_GET_CNT_FAIL, QL_OSI_QUEUE__FAIL, QL_OSI_SEMA_CREATE_FAILE = 100 | (QL_COMPONENT_OSI << 16), QL_OSI_SEMA_DELETE_FAIL, QL_OSI_SEMA_IS_FULL, QL_OSI_SEMA_RELEASE_FAIL, QL_OSI_SEMA_GET_FAIL, QL_OSI_SEMA__FAIL, QL_OSI_MUTEX_CREATE_FAIL = 150 | (QL_COMPONENT_OSI << 16), QL_OSI_MUTEX_DELETE_FAIL, QL_OSI_MUTEX_LOCK_FAIL, QL_OSI_MUTEX_UNLOCK_FAIL, QL_OSI_EVENT_SEND_FAIL = 200 | (QL_COMPONENT_OSI << 16), QL_OSI_EVENT_GET_FAIL, QL_OSI_EVENT_REGISTER_FAIL, QL_OSI_TIMER_CREATE_FAIL = 250 | (QL_COMPONENT_OSI << 16), QL_OSI_TIMER_START_FAIL, QL_OSI_TIMER_STOP_FAIL, QL_OSI_TIMER_DELETE_FAIL, QL_OSI_TIMER_BIND_TASK_FAIL, QL_OSI_SWDOG_REGISTER_FAIL = 300 | (QL_COMPONENT_OSI << 16), QL_OSI_SWDOG_UNREGISTER_FAIL, QL_OSI_SWDOG_FEED_DOG_FAIL, QL_OSI_SWDOG_ENABLE_FAIL, QL_OSI_SWDOG_DISABLE_FAIL, QL_OSI_EGROUP_CREATE_FAILE = 350 | (QL_COMPONENT_OSI << 16), QL_OSI_EGROUP_DELETE_FAIL, QL_OSI_EGROUP_CLEAR_BITS_FAIL, QL_OSI_EGROUP_SET_BITS_FAIL, QL_OSI_EGROUP_GET_BITS_FAIL, QL_OSI_EGROUP_WAIT_BITS_FAIL, QL_OSI_EGROUP_SYNC_FAIL, }osi_errcode_e; #endif