EC600G/components/hal/include/hal_config.h.in

/* Copyright (C) 2018 RDA Technologies Limited and/or its affiliates("RDA").
 * All rights reserved.
 *
 * This software is supplied "AS IS" without any warranties.
 * RDA assumes no responsibility or liability for the use of the software,
 * conveys no license or title under any patent, copyright, or mask work
 * right to the product. RDA reserves the right to make changes in the
 * software without notification.  RDA also make no representation or
 * warranty that such application will be suitable for the specified use
 * without further testing or modification.
 */

#ifndef _HAL_CONFIG_H_
#define _HAL_CONFIG_H_

#include "hal_chip_config.h"

//quectel update
#include "quec_proj_config.h"

// @AUTO_GENERATION_NOTICE@

/**
 * SOC name
 */
#cmakedefine CONFIG_SOC "@CONFIG_SOC@"

/**
 * build target
 */
#cmakedefine CONFIG_BUILD_TARGET "@CONFIG_BUILD_TARGET@"

/**
 * whether it is 8910 series
 */
#cmakedefine CONFIG_SOC_8910

/**
 * whether it is 8811 series
 */
#cmakedefine CONFIG_SOC_8811

/**
 * whether it is 8811 series
 */
#cmakedefine CONFIG_SOC_8850

/**
 * whether it is FPGA, not real chip
 *
 * This will be defined when developing in FPGA. For SOC independent codes,
 * and it is needed to distinguish FPGA and real chip, this macro can be
 * used.
 */
#cmakedefine CONFIG_RUN_ON_FPGA

/**
 * whether it is ARM CPUs
 */
#cmakedefine CONFIG_CPU_ARM

/**
 * whether it is ARMv7-A CPUs
 */
#cmakedefine CONFIG_CPU_ARMV7A

/**
 * whether it is ARM Cortex A5
 */
#cmakedefine CONFIG_CPU_ARM_CA5

/**
 * whether it is ARMv7-M CPUs
 */
#cmakedefine CONFIG_CPU_ARMV7M

/**
 * whether it is ARM Cortex M4F
 */
#cmakedefine CONFIG_CPU_ARM_CM4F

/**
 * whether it is ARMv8-M CPUs
 */
#cmakedefine CONFIG_CPU_ARMV8M

/**
 * whether it is ARM Cortex M33F
 */
#cmakedefine CONFIG_CPU_ARM_CM33F

/**
 * I-cache and D-cache line size
 *
 * It is assumed that I-cache line size is the same with D-cache line size.
 */
#cmakedefine CONFIG_CACHE_LINE_SIZE @CONFIG_CACHE_LINE_SIZE@

/**
 * whether there is MMU
 */
#cmakedefine CONFIG_HAVE_MMU

/**
 * SOC have hardware LZMA
 */
#cmakedefine CONFIG_HAVE_LZMA

/**
 * SOC have hardware spinlock
 */
#cmakedefine CONFIG_HAVE_SPINLOCK

/**
 * whether there is PSRAM
 */
#cmakedefine CONFIG_USE_PSRAM

/**
 * whether it is QPI 4bits PSRAM (8811)
 */
#cmakedefine CONFIG_QPI_PSRAM

/**
 * whether it is OPI 8bits PSRAM (8811)
 */
#cmakedefine CONFIG_OPI_PSRAM

/**
 * whether there is DDR
 */
#cmakedefine CONFIG_USE_DDR

/**
 * whether there is PSRAM or DDR
 */
#cmakedefine CONFIG_HAVE_EXT_RAM

/**
 * PSRAM or DDR size, shall match CONFIG_RAM_xx
 */
#cmakedefine CONFIG_RAM_SIZE @CONFIG_RAM_SIZE@

/**
 * whether NOR flash is used
 */
#cmakedefine CONFIG_NOR_FLASH

/**
 * NOR flash size, shall match CONFIG_FLASH_xx
 */
#cmakedefine CONFIG_FLASH_SIZE @CONFIG_FLASH_SIZE@

/**
 * SRAM size
 *
 * - 8955/8909: system SRAM size
 * - 8811: total SRAM size
 * - 8910: total SRAM size
 */
#cmakedefine CONFIG_SRAM_SIZE @CONFIG_SRAM_SIZE@

/**
 * aon SRAM size (8850)
 */
#cmakedefine CONFIG_AON_SRAM_SIZE @CONFIG_AON_SRAM_SIZE@

/**
 * cp SRAM size (8850)
 */
#cmakedefine CONFIG_CP_SRAM_SIZE @CONFIG_CP_SRAM_SIZE@

/**
 * simage header size (used in 8811)
 */
#cmakedefine CONFIG_SIMAGE_HEADER_SIZE @CONFIG_SIMAGE_HEADER_SIZE@

/**
 * uimage header size (used in 8910)
 */
#cmakedefine CONFIG_UIMAGE_HEADER_SIZE @CONFIG_UIMAGE_HEADER_SIZE@

/**
 * system ROM physical address
 *
 * It may be undefined when system ROM won't be accessed
 */
#cmakedefine CONFIG_ROM_PHY_ADDRESS @CONFIG_ROM_PHY_ADDRESS@

/**
 * NBROM physical address
 */
#cmakedefine CONFIG_NBROM_PHY_ADDRESS @CONFIG_NBROM_PHY_ADDRESS@

/**
 * system SRAM physical address
 */
#cmakedefine CONFIG_SRAM_PHY_ADDRESS @CONFIG_SRAM_PHY_ADDRESS@

/**
 * aon SRAM physical address (8850)
 */
#cmakedefine CONFIG_AON_SRAM_PHY_ADDRESS @CONFIG_AON_SRAM_PHY_ADDRESS@

/**
 * cp SRAM physical address (8850)
 */
#cmakedefine CONFIG_CP_SRAM_PHY_ADDRESS @CONFIG_CP_SRAM_PHY_ADDRESS@

/**
 * NOR flash physical address
 */
#cmakedefine CONFIG_NOR_PHY_ADDRESS @CONFIG_NOR_PHY_ADDRESS@

/**
 * external NOR flash physical address
 */
#cmakedefine CONFIG_NOR_EXT_PHY_ADDRESS @CONFIG_NOR_EXT_PHY_ADDRESS@

/**
 * PSRAM or DDR physical address
 */
#cmakedefine CONFIG_RAM_PHY_ADDRESS @CONFIG_RAM_PHY_ADDRESS@

#cmakedefine CONFIG_RAM_HEADER_SIZE @CONFIG_RAM_HEADER_SIZE@

/**
 * GIC base address
 */
#cmakedefine CONFIG_GIC_BASE_ADDRESS @CONFIG_GIC_BASE_ADDRESS@

/**
 * GIC CPU interface offset
 */
#cmakedefine CONFIG_GIC_CPU_INTERFACE_OFFSET @CONFIG_GIC_CPU_INTERFACE_OFFSET@

/**
 * GIC priority bits, unique level is (1<<CONFIG_GIC_PRIORITY_BITS)
 */
#cmakedefine CONFIG_GIC_PRIORITY_BITS @CONFIG_GIC_PRIORITY_BITS@

/**
 * NVIC priority bits, unique level is (1<<CONFIG_NVIC_PRIORITY_BITS)
 */
#cmakedefine CONFIG_NVIC_PRIORITY_BITS @CONFIG_NVIC_PRIORITY_BITS@

/**
 * Interrupt count
 */
#cmakedefine CONFIG_IRQ_COUNT @CONFIG_IRQ_COUNT@

/**
 * system ROM size
 */
#cmakedefine CONFIG_ROM_SIZE @CONFIG_ROM_SIZE@

/**
 * NBROM size
 */
#cmakedefine CONFIG_NBROM_SIZE @CONFIG_NBROM_SIZE@

/**
 * whether dual bootloader is supported
 *
 * Dual bootloader needs system ROM support.
 */
#cmakedefine CONFIG_DUAL_BOOTLOADER_ENABLE

/**
 * NOR flash address of bootloader
 *
 * When dual bootloader is supported, it is the same as
 * \p CONFIG_BOOT1_FLASH_ADDRESS.
 */
#cmakedefine CONFIG_BOOT_FLASH_ADDRESS @CONFIG_BOOT_FLASH_ADDRESS@

/**
 * NOR flash address of boot1 in dual bootloader
 */
#cmakedefine CONFIG_BOOT1_FLASH_ADDRESS @CONFIG_BOOT1_FLASH_ADDRESS@

/**
 * NOR flash address of boot2 in dual bootloader
 */
#cmakedefine CONFIG_BOOT2_FLASH_ADDRESS @CONFIG_BOOT2_FLASH_ADDRESS@

/**
 * bootloader reserved size on NOR flash
 *
 * When dual bootloader is supported, this is the total reserved NOR flash
 * size for bootloader.
 */
#cmakedefine CONFIG_BOOT_FLASH_SIZE @CONFIG_BOOT_FLASH_SIZE@

/**
 * bootloader maximum size
 *
 * When dual bootloader is enabled, it is \p CONFIG_BOOT_FLASH_SIZE/2.
 * When dual bootloader isn't enabled, it is \p CONFIG_BOOT_FLASH_SIZE.
 *
 * The image header size is included.
 */
#cmakedefine CONFIG_BOOTLOADER_SIZE @CONFIG_BOOTLOADER_SIZE@

/**
 * tz support(8850)
 */
#cmakedefine CONFIG_TRUSTZONE_SUPPORT

/**
 * NOR flash address of spl
 *
 * When dual bootloader is supported, it is the same as
 * \p CONFIG_SPL1_FLASH_ADDRESS.
 */
#cmakedefine CONFIG_SPL_FLASH_ADDRESS @CONFIG_SPL_FLASH_ADDRESS@

/**
 * NOR flash address of spl1 in dual bootloader
 */
#cmakedefine CONFIG_SPL1_FLASH_ADDRESS @CONFIG_SPL1_FLASH_ADDRESS@

/**
 * NOR flash address of spl2 in dual bootloader
 */
#cmakedefine CONFIG_SPL2_FLASH_ADDRESS @CONFIG_SPL2_FLASH_ADDRESS@

/**
 * spl reserved size on NOR flash
 *
 * When dual spl is supported, this is the total reserved NOR flash
 * size for bootloader.
 */
#cmakedefine CONFIG_SPL_FLASH_SIZE @CONFIG_SPL_FLASH_SIZE@

/**
 * spl reserved size on NOR flash
 * */
#cmakedefine CONFIG_SPL_SIZE @CONFIG_SPL_SIZE@
/**
 * NOR flash physical address of sml
 */

#cmakedefine CONFIG_TZ_SML_FLASH_ADDRESS @CONFIG_TZ_SML_FLASH_ADDRESS@

/**
 * sml maximum size
 */

#cmakedefine CONFIG_TZ_SML_FLASH_SIZE @CONFIG_TZ_SML_FLASH_SIZE@

/**
 * NOR flash physical address of sml
 */

#cmakedefine CONFIG_TZ_TOS_FLASH_ADDRESS @CONFIG_TZ_TOS_FLASH_ADDRESS@

/**
 * sml maximum size
 */

#cmakedefine CONFIG_TZ_TOS_FLASH_SIZE @CONFIG_TZ_TOS_FLASH_SIZE@

/**
 * NOR flash physical address of tfm
 */

#cmakedefine CONFIG_TFM_FLASH_ADDRESS @CONFIG_TFM_FLASH_ADDRESS@

/**
 * tfm maximum size
 */

#cmakedefine CONFIG_TFM_FLASH_SIZE @CONFIG_TFM_FLASH_SIZE@


/**
 * NOR flash physical address of s_storage
 */

#cmakedefine CONFIG_S_STORAGE_FLASH_ADDRESS @CONFIG_S_STORAGE_FLASH_ADDRESS@


/**
 * reserved NOR flash size for s_storage
 */

#cmakedefine CONFIG_S_STORAGE_FLASH_SIZE @CONFIG_S_STORAGE_FLASH_SIZE@

/**
 * NOR flash physical address of application
 */
#cmakedefine CONFIG_APP_FLASH_ADDRESS @CONFIG_APP_FLASH_ADDRESS@

/**
 * reserved NOR flash size for application
 */
#cmakedefine CONFIG_APP_FLASH_SIZE @CONFIG_APP_FLASH_SIZE@

/**
 * NOR flash address of loadable app image
 */
#cmakedefine CONFIG_APPIMG_FLASH_ADDRESS @CONFIG_APPIMG_FLASH_ADDRESS@

/**
 * reserved NOR flash size for loadable app image
 */
#cmakedefine CONFIG_APPIMG_FLASH_SIZE @CONFIG_APPIMG_FLASH_SIZE@

/**
 * NOR flash address of loadable app2 image   --quectel update
 */
#cmakedefine CONFIG_APPIMG2_FLASH_ADDRESS @CONFIG_APPIMG2_FLASH_ADDRESS@

/**
 * reserved NOR flash size for loadable app2 image  --quectel update
 */
#cmakedefine CONFIG_APPIMG2_FLASH_SIZE @CONFIG_APPIMG2_FLASH_SIZE@

/**
 * NOR flash physical address of openCPU
 */
#cmakedefine CONFIG_OPENCPU_FLASH_ADDRESS @CONFIG_OPENCPU_FLASH_ADDRESS@

/**
 * reserved NOR flash size for openCPU
 */
#cmakedefine CONFIG_OPENCPU_FLASH_SIZE @CONFIG_OPENCPU_FLASH_SIZE@

/**
 * NOR flash address of system file system
 *
 * The mount point of system file system is \p CONFIG_FS_SYS_MOUNT_POINT.
 */
#cmakedefine CONFIG_FS_SYS_FLASH_ADDRESS @CONFIG_FS_SYS_FLASH_ADDRESS@

/**
 * reserved NOR flash size for system file system
 */
#cmakedefine CONFIG_FS_SYS_FLASH_SIZE @CONFIG_FS_SYS_FLASH_SIZE@

/**
 * NOR flash address of modem image file system
 *
 * The mount point of modem image file system is \p CONFIG_FS_MODEM_MOUNT_POINT.
 */
#cmakedefine CONFIG_FS_MODEM_FLASH_ADDRESS @CONFIG_FS_MODEM_FLASH_ADDRESS@

/**
 * reserved NOR flash size for modem image file system
 */
#cmakedefine CONFIG_FS_MODEM_FLASH_SIZE @CONFIG_FS_MODEM_FLASH_SIZE@

/**
 * NOR flash address of factory file system
 *
 * The mount point of factory file system is \p CONFIG_FS_FACTORY_MOUNT_POINT.
 */
#cmakedefine CONFIG_FS_FACTORY_FLASH_ADDRESS @CONFIG_FS_FACTORY_FLASH_ADDRESS@

/**
 * reserved NOR flash size for factory file system
 */
#cmakedefine CONFIG_FS_FACTORY_FLASH_SIZE @CONFIG_FS_FACTORY_FLASH_SIZE@

/**
 * external NOR flash physical address of application
 */
#cmakedefine CONFIG_APP_FLASH2_ADDRESS @CONFIG_APP_FLASH2_ADDRESS@

/**
 * reserved external NOR flash size for application
 */
#cmakedefine CONFIG_APP_FLASH2_SIZE @CONFIG_APP_FLASH2_SIZE@

/**
 * mount point of modem image file system
 */
#cmakedefine CONFIG_FS_MODEM_MOUNT_POINT "@CONFIG_FS_MODEM_MOUNT_POINT@"

/**
 * mount point of system file system
 */
#cmakedefine CONFIG_FS_SYS_MOUNT_POINT "@CONFIG_FS_SYS_MOUNT_POINT@"

/**
 * mount point of factory file system
 */
#cmakedefine CONFIG_FS_FACTORY_MOUNT_POINT "@CONFIG_FS_FACTORY_MOUNT_POINT@"

/**
 * directory for modem running NV
 */
#cmakedefine CONFIG_FS_MODEM_NVM_DIR "@CONFIG_FS_MODEM_NVM_DIR@"

/**
 * directory for application NV
 */
#cmakedefine CONFIG_FS_AP_NVM_DIR "@CONFIG_FS_AP_NVM_DIR@"

/**
 * directory for firmware update
 *
 * Firmware update related files will be located under this directory,
 * including the differential pack file, and intermediate files.
 */
#cmakedefine CONFIG_FS_FOTA_DATA_DIR "@CONFIG_FS_FOTA_DATA_DIR@"

/**
 * whether loading app image from NOR flash is enabled
 */
#cmakedefine CONFIG_APPIMG_LOAD_FLASH

/**
 * whether loading app image from file is enabled
 *
 * When loading app image from file, the image will be loaded to RAM, and
 * execute on RAM.
 */
#cmakedefine CONFIG_APPIMG_LOAD_FILE

/**
 * Whether to verify app image signature when secure boot is enabled
 */
#cmakedefine CONFIG_APPIMG_SIGCHECK_ENABLE

/**
 * loadable app image file name
 */
#cmakedefine CONFIG_APPIMG_LOAD_FILE_NAME "@CONFIG_APPIMG_LOAD_FILE_NAME@"

/**
 * loadable app2 image file name     #quectel update
 */
#cmakedefine CONFIG_APPIMG2_LOAD_FILE_NAME "@CONFIG_APPIMG2_LOAD_FILE_NAME@"

/**
 * reserved memory size for blue screen. For ARM v7A, the size is blue screen
 * data size plus blue screen stack size. For ARM v8M, it is just the blue
 * screen data size.
 */
#cmakedefine CONFIG_BLUE_SCREEN_SIZE @CONFIG_BLUE_SCREEN_SIZE@

/**
 * whether to enable blue screen backup
 */
#cmakedefine CONFIG_BSCORE_ENABLE

/**
 * whether blue screen backup located on sram
 */
#cmakedefine CONFIG_BSCORE_ON_SRAM

/**
 * blue screen core total size
 */
#cmakedefine CONFIG_BSCORE_SIZE @CONFIG_BSCORE_SIZE@

/**
 * blue screen core stack dump ahead offset
 */
#cmakedefine CONFIG_BSCORE_STACK_EXTRA @CONFIG_BSCORE_STACK_EXTRA@

/**
 * blue screen core stack dump size
 */
#cmakedefine CONFIG_BSCORE_STACK_SIZE @CONFIG_BSCORE_STACK_SIZE@

/**
 * blue screen core cp stack dump size
 */
#cmakedefine CONFIG_BSCORE_CP_STACK_SIZE @CONFIG_BSCORE_CP_STACK_SIZE@

/**
 * blue screen core profile size
 */
#cmakedefine CONFIG_BSCORE_PROFILE_SIZE @CONFIG_BSCORE_PROFILE_SIZE@

/**
 * enable med encrypt data or not (8811)
 */
#cmakedefine CONFIG_MED_CODE_ENCRYPT

/**
 * Power down flash in low power mode (8910)
 */
#cmakedefine CONFIG_FLASH_LP_POWER_DOWN

/**
 * Load flash and psram infomation to share mem
 */
#cmakedefine CONFIG_SHAREMEM_EMMCDDR_INFO

/**
 * PSRAM enter half sleep in low power mode (8910)
 */
#cmakedefine CONFIG_PSRAM_LP_HALF_SLEEP

/**
 * whether to support PM2 cold boot sleep mode
 */
#cmakedefine CONFIG_PSM_PM2BOOT_ENABLE

/**
 * whether to check cp images signature
 */
#cmakedefine CONFIG_CPBIN_SIGCHECK

/**
 * keyled power is used for RF switch (8910)
 */
#cmakedefine CONFIG_BOARD_KPLED_USED_FOR_RF_SWITCH

/**
 * force pull up for gpio4 in iomux (8910)
 */
#cmakedefine CONFIG_GPIO4_FORCE_PULL_UP

/**
 * gpio number for pmic interrupt (8910)
 */
#cmakedefine CONFIG_PMIC_INTR_GPIO @CONFIG_PMIC_INTR_GPIO@

/**
 * enable camera power at initialization (8910)
 */
#cmakedefine CONFIG_CAMA_POWER_ON_INIT @CONFIG_CAMA_POWER_ON_INIT@

/**
 * whether camera clock is needed for audio (8910)
 */
#cmakedefine CONFIG_CAMA_CLK_FOR_AUDIO @CONFIG_CAMA_CLK_FOR_AUDIO@

/**
 * use 26MHz DCXO, rather than VCXO (8909)
 */
#cmakedefine CONFIG_CRYSTAL_WITHOUT_OSCILLATOR

/**
 * RF use LDO (8909)
 */
#cmakedefine CONFIG_RF_LDO_MODE

/**
 * hardware supported SIM count
 *
 * This is not the supported SIM count of protocol stack and application.
 */
#cmakedefine CONFIG_HAL_SIM_COUNT @CONFIG_HAL_SIM_COUNT@

/**
 * whether GSM is supported
 */
#cmakedefine CONFIG_GSM_SUPPORT

/**
 * whether NBIOT is supported
 */
#cmakedefine CONFIG_LTE_NBIOT_SUPPORT

/**
 * whether to enter RF calibration mode by gpio
 */
#cmakedefine CONFIG_BOARD_ENTER_CALIB_BY_GPIO

/**
 * the gpio for detect entering RF calibration mode
 */
#cmakedefine CONFIG_BOARD_ENTER_CALIB_GPIO @CONFIG_BOARD_ENTER_CALIB_GPIO@

/**
 * whether to support SIM1 hot plug
 */
#cmakedefine CONFIG_BOARD_SUPPORT_SIM1_DETECT

/**
 * gpio for SIM1 hot plug detect
 */
#cmakedefine CONFIG_BOARD_SIM1_DETECT_GPIO @CONFIG_BOARD_SIM1_DETECT_GPIO@

/**
 * whether to support SIM2 hot plug
 */
#cmakedefine CONFIG_BOARD_SUPPORT_SIM2_DETECT

/**
 * gpio for SIM2 hot plug detect
 */
#cmakedefine CONFIG_BOARD_SIM2_DETECT_GPIO @CONFIG_BOARD_SIM2_DETECT_GPIO@

/**
 * whether debughost event is enabled
 */
#cmakedefine CONFIG_ENABLE_DEBUGHOST_EVENT

/**
 * whether power key is tied to GND
 */
#cmakedefine CONFIG_PWRKEY_TIE_GND

/**
 * whether power key can wakeup psm mode
 */
#cmakedefine CONFIG_PWRKEY_WAKEUP_PSM

/**
 * whether power key can power up after shutdown (8910)
 */
#cmakedefine CONFIG_PWRKEY_POWERUP

/**
 * whether wakeup pin (psm_ext_int) can power up after shutdown
 */
#cmakedefine CONFIG_WAKEUP_PIN_POWERUP

/**
 * whether charger can power up after shutdown
 */
#cmakedefine CONFIG_CHARGER_POWERUP

/**
 * whether normal power off
 */
#cmakedefine CONFIG_SHUTDOWN_NORMAL_POWER_OFF

/**
 * whether there is external flash on board
 */
#cmakedefine CONFIG_BOARD_WITH_EXT_FLASH

/**
 * external flash size
 */
#cmakedefine CONFIG_BOARD_EXT_FLASH_SIZE @CONFIG_BOARD_EXT_FLASH_SIZE@

/**
 * external flash frequency
 */
#cmakedefine CONFIG_BOARD_EXT_FLASH_FREQ @CONFIG_BOARD_EXT_FLASH_FREQ@

/**
 * whether external flash working in quad mode
 */
#cmakedefine CONFIG_BOARD_EXT_FLASH_QUAD_MODE

/**
 * external flash controller sample delay
 */
#cmakedefine CONFIG_BOARD_EXT_FLASH_SAMPLE_DELAY @CONFIG_BOARD_EXT_FLASH_SAMPLE_DELAY@

/**
 * external flash controller clk divider
 */
#cmakedefine CONFIG_BOARD_EXT_FLASH_CLK_DIVIDER @CONFIG_BOARD_EXT_FLASH_CLK_DIVIDER@

/**
 * external flash is connected to gpio 20-25 (8811)
 */
#cmakedefine CONFIG_BOARD_EXT_FLASH_GPIO20

/**
 * whether application will split into external flash
 */
#cmakedefine CONFIG_APP_FLASH2_ENABLED

/**
 * whether open application will split into external flash -----quectel update
 */
#cmakedefine CONFIG_APPIMG_FLASH2_ENABLED

/**
 * /ext mount start address -----quectel update
 */
#cmakedefine CONFIG_EFS_SYS_FLASH2_ADDRESS @CONFIG_EFS_SYS_FLASH2_ADDRESS@

/**
 * /ext mount reserved size on ext NOR flash -----quectel update
 */
#cmakedefine CONFIG_EFS_SYS_FLASH2_SIZE @CONFIG_EFS_SYS_FLASH2_SIZE@

/**
 * whether there are file system on external flash
 */
#cmakedefine CONFIG_FS_EXT_ENABLED

/**
 * whether support ims delta nv
 */
#cmakedefine CONFIG_SUPPORT_IMS_DELTA_NV

/**
 * whether support inner delta nv
 */
#cmakedefine CONFIG_SUPPORT_INNER_DELTA_NV

/**
 * whether gpio is used for Vbat_RF switch
 */
#cmakedefine CONFIG_GPIO_USED_FOR_VBAT_RF_SWITCH

/**
 * Used gpio x as Vbat_RF swtich
 */
#cmakedefine CONFIG_GPIO_X_USED_FOR_VBAT_RF @CONFIG_GPIO_X_USED_FOR_VBAT_RF@

/**
 * dcdc LV support (8811)
 */
#cmakedefine CONFIG_LV_SUPPORT

/**
 * GPIO to indicate PM2 (8811)
 */
#cmakedefine CONFIG_PM2_IND_GPIO @CONFIG_PM2_IND_GPIO@

/**
 * GPIO to indicate PM3 (8811)
 */
#cmakedefine CONFIG_PM3_IND_GPIO @CONFIG_PM3_IND_GPIO@

/**
 * sys_wdt open -----quectel update
 */
#cmakedefine CONFIG_SYS_WDT_ENABLE

/**
 * sys_wdt timeout
 */
#cmakedefine CONFIG_SYS_WDT_TIMEOUT @CONFIG_SYS_WDT_TIMEOUT@

/**
 * sys_wdt feed interval
 */
#cmakedefine CONFIG_SYS_WDT_FEED_INTERVAL @CONFIG_SYS_WDT_FEED_INTERVAL@

/**
 * unity output to uart
 */
#cmakedefine CONFIG_UNITY_OUTPUT_UART

/**
 * unity unit test uart
 */
#cmakedefine CONFIG_UNITY_UART_NAME @CONFIG_UNITY_UART_NAME@

/**
 * unity unit test uart baud rate
 */
#cmakedefine CONFIG_UNITY_UART_BAUD @CONFIG_UNITY_UART_BAUD@

/**
 * tfm support
 */
#cmakedefine CONFIG_TFM_SUPPORT @CONFIG_TFM_SUPPORT@

/**
 * tfm test support
 */
#cmakedefine CONFIG_TFM_TEST_SUPPORT @CONFIG_TFM_TEST_SUPPORT@


#cmakedefine CONFIG_CP_SIGN_ENABLE

/**
 * ap must wakeup before bt sleeptime expire
 */
#cmakedefine CONFIG_AP_SLEEP_SYNC_WITH_BT_SLEEPTIME

/**
 * whether to identify 26M/32k clock by gpio and RTC mode
 */
#cmakedefine CONFIG_IDENTIFY_CLOCK

/**
 * trace sn space size, for sharing with tfm (8811)
 */
#cmakedefine CONFIG_TRACE_SN_SIZE @CONFIG_TRACE_SN_SIZE@

/**
 * trace sn address, for sharing with tfm (8811)
 */
#cmakedefine CONFIG_TRACE_SN_START_ADR @CONFIG_TRACE_SN_START_ADR@

/**
 * whether use 8850 V3 board
 */
#cmakedefine CONFIG_CHIP_8850_V3_BOARD

#endif